T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-7104MD/2YD Yellow Features Description z Pre-trimmed leads for pc mounting. The Yellow source color devices are made with Gallium z Black case enhances contrast ratio. Arsenide Phosphide on Gallium Phosphide Yellow Light z Wide viewing angle. Emitting Diode. z High reliability life measured in years. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAE7315 REV NO: V.9B DATE: APR/15/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102013046 Selection Guide Part No. Dice L-7104MD/2YD Iv (mcd) [2] @ 10mA Lens Type Yellow (GaAsP/GaP) Viewing Angle [1] Min. Typ. 21/2 8 15 40 Yellow Diffused Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Yellow D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAE7315 REV NO: V.9B DATE: APR/15/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102013046 Yellow L-7104MD/2YD SPEC NO: DSAE7315 REV NO: V.9B DATE: APR/15/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102013046 PACKING & LABEL SPECIFICATIONS L-7104MD/2YD SPEC NO: DSAE7315 REV NO: V.9B DATE: APR/15/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102013046 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAE7315 REV NO: V.9B DATE: APR/15/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1102013046