Bulletin PD-20563 rev. A 09/01 15TQ060 15TQ060S 15 Amp SCHOTTKY RECTIFIER Major Ratings and Characteristics Characteristics Description/Features 15TQ060 Units IF(AV) Rectangular waveform 15 A VRRM 60 V IFSM @ tp = 5 s sine 1000 A VF @ 15 Apk, TJ = 125C 0.56 V TJ range - 55 to 150 C The 15TQ060 Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles 15TQ060 15TQ060S Base Cathode Base Cathode 2 1 Cathode 3 Anode TO-220AC www.irf.com 1 3 Anode N/C D2PAK 1 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 Voltage Ratings Part number VR 15TQ060 Max. DC Reverse Voltage (V) 60 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 15TQ Units 15 A Max. Peak One Cycle Non-Repetitive 1000 Surge Current * See Fig. 7 260 EAS Non-Repetitive Avalanche Energy IAR RepetitiveAvalancheCurrent A Conditions 50% duty cycle @ TC = 104 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied 6 mJ TJ = 25 C, IAS = 1.50 Amps, L = 11.5 mH 1.50 A Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) * See Fig. 1 IRM Max. Reverse Leakage Current (1) 15TQ Units 0.62 V @ 15A Conditions 0.82 V @ 30A 0.56 V @ 15A 0.71 V @ 30A TJ = 25 C TJ = 125 C 0.80 mA TJ = 25 C * See Fig. 2 45 mA TJ = 125 C CT Max. Junction Capacitance 720 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body 10000 V/ s dv/dt Max. Voltage Rate of Change (Rated VR) VR = rated VR (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications 15TQ Units TJ Max. Junction Temperature Range Parameters -55 to 150 C Tstg Max. Storage Temperature Range Conditions -55 to 150 C RthJC Max. Thermal Resistance Junction to Case 3.25 C/W DC operation RthCS Typical Thermal Resistance, Case to 0.50 C/W Mounting surface , smooth and greased * See Fig. 4 Heatsink wt Approximate Weight T Mounting Torque Case Style 2 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) TO-220AC JEDEC www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 1000 1000 T J = 150 C R ever s e Current - I R (mA) 100 T J = 150 C T J = 25 C 100 100 C 1 75 C 50 C 0.1 25 C 0.01 0.001 0 10 20 30 40 50 60 R evers e Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1000 Junction Capacitance - C T (pF ) Ins tantaneous F orward Current - I F (A) T J = 125 C 125 C 10 10 1 0 0.4 0.8 1.2 1.6 T J = 25 C 100 2 0 10 F orward Voltage Drop - VF M (V) 20 30 40 50 60 R evers e Voltage - V R (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance - Z thJC (C/W) 10 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 0.01 0.001 0.00001 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.0001 0.001 0.01 0.1 1 t 1, Rectangular Pulse Duration (Seconds) 10 100 Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 15TQ060, 15TQ060S 150 14 140 12 Average P ower L os s - (Watts ) Allowable Cas e T emperature - ( C) Bulletin PD-20563 rev. A 09/01 130 DC 120 110 100 S quare wave (D = 0.50) 80% R ated VR applied 90 D D D D D 10 8 = 0.20 = 0.25 = 0.33 = 0.50 = 0.75 R MS L imit DC 6 4 2 see note (2) 80 0 0 5 10 15 20 25 0 Average F orward Current - I F (AV) (A) 2 4 6 8 10 12 14 16 18 20 22 Average F orward Current - I F (AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Non-R epetitive S urge Current - I F S M (A) 1000 At Any R ated L oad Condition And With R ated V R R M Applied F ollowing S urge 100 10 100 1000 10000 S quare Wave P uls e Duration - t p (micros ec) Fig. 7 - Maximum Non-Repetitive Surge Current L IRFP460 D UT Rg = 25 ohm C URRE NT M O N ITO R H IG H-SPE ED SW ITC H FR EE-W H E EL D IO D E + V d = 25 V olt 40H FL40 S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 Outline Table 10.54 (0.41) MAX. 1.32 (0.05) 3.78 (0.15) 3.54 (0.14) 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 2 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) Base Cathode 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 2.64 (0.10) 0.94 (0.04) 0.69 (0.03) 1 Cathode 1 3 3 Anode 0.61 (0.02) MAX. 4.57 (0.18) 4.32 (0.17) 5.08 (0.20) REF. Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X Base Cathode REF. 1.40 (0.055) 1.14 (0.045) 2X 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 2 1 3 4.57 (0.18) 4.32 (0.17) 1 N/C 3 Anode 2 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0.20) REF. 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 15TQ060, 15TQ060S Bulletin PD-20563 rev. A 09/01 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/01 6 www.irf.com