DESCRIPTION
This is a blank 13.56MHz RFID/NFC sticker - often used for inventory uses but also wherever a
sticker is desired. The tag contains a small RFID chip and an antenna, and is passively powered
by the reader/writer when placed a couple inches away.
These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle
ISO/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are
tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID
Shield for Arduino!
These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks,
and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or
Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag.