MC74HCT14A Hex Schmitt-Trigger Inverter with LSTTL Compatible Inputs High-Performance Silicon-Gate CMOS http://onsemi.com The MC74HCT14A may be used as a level converter for interfacing TTL or NMOS outputs to high-speed CMOS inputs. The HCT14A is useful to "square up" slow input rise and fall times. Due to the hysteresis voltage of the Schmitt trigger, the HCT14A finds applications in noisy environments. SOIC-14 NB D SUFFIX CASE 751A Features * * * * * * * * * Output Drive Capability: 10 LSTTL Loads TTL/NMOS-Compatible Input Levels Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 4.5 to 5.5 V Low Input Current: 1.0 mA In Compliance With the JEDEC Standard No. 7.0 A Requirements Chip Complexity: 72 FETs or 18 Equivalent Gates NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free and are RoHS Compliant TSSOP-14 DT SUFFIX CASE 948G PIN ASSIGNMENT A1 1 14 VCC Y1 2 13 A6 A2 3 12 Y6 Y2 4 11 A5 A3 5 10 Y5 Y3 6 9 A4 GND 7 8 Y4 MARKING DIAGRAMS LOGIC DIAGRAM A1 1 2 3 4 14 14 HCT 14A ALYWG G HCT14AG AWLYWW Y1 1 A2 A3 A4 5 6 9 8 11 10 1 SOIC-14 NB Y2 A L, WL Y, YY W, WW G or G Y3 TSSOP-14 = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package (Note: Microdot may be in either location) Y4 FUNCTION TABLE A5 A6 13 Y=A 12 Y6 PIN 14 = VCC PIN 7 = GND (c) Semiconductor Components Industries, LLC, 2014 October, 2014 - Rev. 14 Y5 Input A Output Y L H H L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. 1 Publication Order Number: MC74HCT14A/D MC74HCT14A MAXIMUM RATINGS Symbol VCC Parameter Value Unit DC Supply Voltage (Referenced to GND) -0.5 to +7.0 V VI DC Input Voltage (Referenced to GND) -0.5 to VCC + 0.5 V VO DC Output Voltage (Referenced to GND) -0.5 to VCC + 0.5 V IIK DC Input Diode Current 20 mA IOK DC Output Diode Current 25 mA IO DC Output Sink Current 25 mA ICC DC Supply Current per Supply Pin 50 mA IGND DC Ground Current per Ground Pin 50 mA TSTG Storage Temperature Range -65 to +150 _C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 _C TJ Junction Temperature under Bias +150 _C qJA Thermal Resistance SOIC TSSOP 125 170 _C/W PD Power Dissipation in Still Air at 85_C SOIC TSSOP 500 450 mW MSL Moisture Sensitivity FR Flammability Rating VESD ILatchup Level 1 Oxygen Index: 30% - 35% ESD Withstand Voltage Latchup Performance UL 94 V-0 @ 0.125 in Human Body Model (Note 1) Machine Model (Note 2) Charged Device Model (Note 3) Above VCC and Below GND at 85_C (Note 4) > 4000 > 300 > 1000 V 300 mA Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Tested to EIA/JESD22-A114-A. 2. Tested to EIA/JESD22-A115-A. 3. Tested to JESD22-C101-A. 4. Tested to EIA/JESD78. RECOMMENDED OPERATING CONDITIONS Symbol VCC VI, VO Parameter Min Max Unit DC Supply Voltage (Referenced to GND) 4.5 5.5 V DC Input Voltage, Output Voltage (Referenced to GND) 0 VCC V -55 +125 _C - (Note 5) ns TA Operating Temperature, All Package Types tr, tf Input Rise and Fall Time (Figure 1) Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 5. No Limit when VI [ 50% VCC, ICC > 1 mA. 6. Unused inputs may not be left open. All inputs must be tied to a high-logic voltage level or a low-logic input voltage level. http://onsemi.com 2 MC74HCT14A DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND) Temperature Limit VCC Min Max Min v125_C Parameter VT)max Maximum Positive-Going Input Threshold Voltage VO = 0.1 V or VCC - 0.1 V |Iout| 20 mA 4.5 5.5 VT)min Minimum Positive-Going Input Threshold Voltage VO = 0.1 V or VCC - 0.1 V |Iout| 20 mA 4.5 5.5 VT*max Maximum Negative-Going Input Threshold Voltage VO = 0.1 V or VCC - 0.1 V |Iout| 20 mA 4.5 5.5 VT*min Minimum Negative-Going Input Threshold Voltage VO = 0.1 V or VCC - 0.1 V |Iout| 20 mA 4.5 5.5 VH max Maximum Hysteresis Voltage VO = 0.1 V or VCC - 0.1 V |Iout| 20 mA 4.5 5.5 VH min Minimum Hysteresis Voltage VO = 0.1 V or VCC - 0.1 V |Iout| 20 mA 4.5 5.5 0.4 0.4 0.4 0.4 0.4 04 VOH Minimum High-Level Output Voltage VI < VT*min |Iout| 20 mA 4.5 5.5 4.4 5.4 4.4 5.4 4.4 5.4 VI < VT*min |Iout| 4.0 mA 4.5 3.98 3.84 3.7 VI VT)max |Iout| 20 mA 4.5 5.5 0.1 0.1 0.1 0.1 0.1 0.1 VI VT)max |Iout| 4.0 mA 4.5 0.26 0.33 0.4 Maximum Low-Level Output Voltage Volts v85_C Symbol VOL Test Conditions *55_C to 25_C 1.9 2.1 1.2 1.4 Max 1.9 2.1 1.2 1.4 1.2 1.4 0.5 0.6 Min Unit 1.9 2.1 V 1.2 1.4 1.2 1.4 0.5 0.6 1.4 1.5 Max V 1.2 1.4 0.5 0.6 1.4 1.5 1.4 1.5 V V IIK Maximum Input Leakage Current VI = VCC or GND 5.5 0.1 1.0 1.0 mA ICC Maximum Quiescent Supply Current (per package) VI = VCC or GND Iout = 0 mA 5.5 1.0 10 40 mA DICC Additional Quiescent Supply Current VI = 2.4 V, Any One Input VI = VCC or GND, Other Inputs lout = 0 mA w*55_C 25_C to 125_C 2.9 2.4 5.5 mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. AC CHARACTERISTICS (CL = 50 pF; Input tr = tf = 6.0 ns) Guaranteed Limit *55_C to 25_C Symbol Parameter Test Conditions Figures Min Max tPLH, tPHL Maximum Propagation Delay, Input A to Output Y (L to H) VCC = 5.0 V 10% CL = 50 pF, Input tr = tf = 6.0 ns 1&2 32 tTLH, tTHL Maximum Output Transition Time, Any Output VCC = 5.0 V 10% CL = 50 pF, Input tr = tf = 6.0 ns 1&2 15 v85_C Min Max v125_C Min Max Unit 40 48 ns 19 22 ns Typical @ 25C, VCC = 5.0 V CPD Power Dissipation Capacitance, per Inverter (Note 7) 32 7. Used to determine the no-load dynamic power consumption: PD = CPD VCC2 f + ICC VCC . http://onsemi.com 3 pF MC74HCT14A tr tf INPUT A 2.7 V 1.3 V 0.3 V OUTPUT Y 3V GND tPLH tPHL 90% 1.3 V 10% tTLH tTHL Figure 1. Switching Waveforms TEST POINT OUTPUT DEVICE UNDER TEST CL * *Includes all probe and jig capacitance. Figure 2. Test Circuit ORDERING INFORMATION Device MC74HCT14ADG NLV74HCT14ADG* MC74HCT14ADR2G NLV74HCT14ADR2G* MC74HCT14ADTR2G NLV74HCT14ADTR2G* Package Shipping SOIC-14 NB (Pb-Free) 55 Units / Rail SOIC-14 NB (Pb-Free) 2500 / Tape & Reel TSSOP-14 (Pb-Free) 2500 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable. http://onsemi.com 4 MC74HCT14A PACKAGE DIMENSIONS TSSOP-14 CASE 948G ISSUE B 14X K REF 0.10 (0.004) 0.15 (0.006) T U M T U V S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. S S N 2X 14 L/2 0.25 (0.010) 8 M B -U- L PIN 1 IDENT. F 7 1 0.15 (0.006) T U N S DETAIL E CCC CCC EEE CCC EEE K A -V- K1 J J1 DIM A B C D F G H J J1 K K1 L M SECTION N-N -W- C 0.10 (0.004) -T- SEATING PLANE D H G DETAIL E MILLIMETERS MIN MAX 4.90 5.10 4.30 4.50 --- 1.20 0.05 0.15 0.50 0.75 0.65 BSC 0.50 0.60 0.09 0.20 0.09 0.16 0.19 0.30 0.19 0.25 6.40 BSC 0_ 8_ SOLDERING FOOTPRINT* 7.06 1 0.65 PITCH 14X 0.36 14X 1.26 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 INCHES MIN MAX 0.193 0.200 0.169 0.177 --- 0.047 0.002 0.006 0.020 0.030 0.026 BSC 0.020 0.024 0.004 0.008 0.004 0.006 0.007 0.012 0.007 0.010 0.252 BSC 0_ 8_ MC74HCT14A PACKAGE DIMENSIONS SOIC-14 NB CASE 751A-03 ISSUE K D A B 14 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS OF AT MAXIMUM MATERIAL CONDITION. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSIONS. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 8 A3 E H L 1 0.25 M DETAIL A 7 B 13X M DIM A A1 A3 b D E e H h L M b 0.25 M C A S B S X 45 _ M A1 e DETAIL A h A C SEATING PLANE MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.19 0.25 0.35 0.49 8.55 8.75 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ INCHES MIN MAX 0.054 0.068 0.004 0.010 0.008 0.010 0.014 0.019 0.337 0.344 0.150 0.157 0.050 BSC 0.228 0.244 0.010 0.019 0.016 0.049 0_ 7_ SOLDERING FOOTPRINT* 6.50 14X 1.18 1 1.27 PITCH 14X 0.58 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC74HCT14A/D