July 2001 Version 3.4 1/63
STV0680B+ VV6410/6411/6500
DUAL-MODE DIGITAL CAMERA CHIPSET
®
DESCRIPTION
STMicroelectronics Imaging Division has enhanced
the feature set of the STV0680B low cost dual-
mode camera chipset to allow a new line of low cost
cameras or toy products to be brought to the
market.
STANDARD FEATURES
ST have maintained the standard features already
available in the su ccessful STV0680B- 001 chipset ,
including:
●STV0680B-003 fully backward compatible
with STV0680B-001
●Support for VV6410/6411 (C IF) and VV6500
(VGA) CMOS imaging sensors.
●Support for SDRAM sizes 16MBit (up to 20
CIF images) or 64Mbit (up to 80 CIF or 26
VGA images).
●Low resolution “economy” mode allows for
more images to be stored.
●High frame rate web cam (tethered video)
over USB.
●Automatic anti-flicker exposure control.
●Image up load over RS232 or USB.
●Driver support for Win98/Win2k/WinME and
MacOS 8.6/9.0/9.1.
●Continuous capt ure while unteth ered (except
when Flashg un enable d) and dow nloadi ng to
AVI file format
●Power-saving “stand-by” mode which
maintains memory contents, as well as
generally low power consumption.
●Simple user interface including 2 buttons,
status LCD display, and buzzer.
●Evaluation Kit (EVK) available.
●Software Development Kit (SDK) allows OEM
PC Software applications to be written.
NEW FEATURES AVAILABLE IN STV0680B-003
●Audio record/playback and “Delete Last”
function
●Custom sounds playback (e.g. “Talking” or
“Musical” camera)
●Flashgun support
●Quick Power Down (by holding Mode
Button).
Audio Record And Playback
The enhanced feature s included in STV0680B-00 3
allow audio memos to be recorded, stored in
SDRAM, and uploaded to the PC over USB or
RS232, to be played back using an OEM software
application developed using the SDK
With the addition of playback hardware, recorded
audio sounds can also be played back on the
camera, and it is possible to download a set of
custom sounds from the PC to allow (e.g.) shutter
“Click-Whirr”, or for a “Tal king Camera”. This has
limitless possibilities for OEM language
customising or licensing.
Flashgun Support and “Delete Last” Function
STV0680B-003 includes flashgun support for an
OEM flashgun mod ule. A n additio nal u ser interf ace
function is available in STV0680B-003 which allows
the user to delete th e last image, conti nuous clip or
audio memo which was captured or recorded.
Evaluation Kit and Reference Design
Evaluation kits are available for both standard
features and enhanced STV0680B-003 features.
Precise de sign gui del in es ar e avail abl e fr om ST as
a separate STV0680B Reference design manual
(see Chapter 12).
Note: Simultaneous audio record and
continuous video capture is not possible.
STV0680B+ VV6410/6411/6500
2/63 Version 3.4
Table of contents
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
1.1 Digital camera chipset ..........................................................................................................6
1.2 Co-processor choices ..........................................................................................................7
1.3 Sensor choices .....................................................................................................................7
1.4 Key system features .............................................................................................................7
Chapter 2 Detailed features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2.1 Sensor type and image formats .........................................................................................10
2.2 User interface .....................................................................................................................11
2.3 Battery level detect and USB auto-switch ..........................................................................13
2.4 Audio record and playback .................................................................................................13
2.5 PC interface options and s oftware support ........................................................................14
2.6 Anti-flicker exposure and gain control ................................................................................15
Chapter 3 Camera modes of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.1 Modes available (STV0680B-001) .....................................................................................16
3.2 Modes available (STV0680B-003) .....................................................................................17
3.3 Description of modes ....................................................................................................... ..17
Chapter 4 STV0680B hardware interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
4.1 STV0680B pinout ...............................................................................................................20
4.2 Sensor interface .................................................................................................................20
4.3 Memory interface ...............................................................................................................20
4.4 USB interface .......................................... ........... ........... ........... ..........................................22
4.5 UART module for RS232 interface .....................................................................................23
4.6 Power management and battery type ................................................................................23
4.7 Quartz crystal .....................................................................................................................24
4.8 Numeric LCD interface .......................................................................................................24
4.9 Switches and LED’s ...........................................................................................................24
4.10 Flashgun hardware interface (STV0680B-003 only) ..........................................................25
4.11 IR filter ............................... ........... ........... ....................................................... ..... ...............25
Chapter 5 Software support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Version 3.4 3/63
STV0680B+ VV6410/6411/6500
5.1 General features ................................................................................................................26
5.2 Software installation ...........................................................................................................26
Chapter 6 Detailed chipset specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.1 Typical camera specifications ............................................................................................28
6.2 STV0680B companion processor ......................................................................................29
6.3 VV6444 sensor ...................................................................................................................30
6.4 VV6410/6411 and VV6500 sensors ...................................................................................32
6.5 Typical current consumption of complete camera ..............................................................33
Chapter 7 STV0680 Camera System Defect Specification . . . . . . . . . . . . . . . . . . . . . . . . .35
7.1 General ..............................................................................................................................35
7.2 Defect specification ............................................................................................................35
7.3 Definition of the "Camera System" .....................................................................................35
7.4 Definition of the "Test Conditions" ......................................................................................37
7.5 Definition of a "Major Visible Defect" ..................................................................................37
7.6 Definition of the "Final Colour Image" ................................................................................39
7.7 Definition of a “Minor Visible Defect” .................................................................................. 39
Chapter 8 STV0680B pinout information and package dimensions . . . . . . . . . . . . . . . . .40
8.1 STV0680B pinout ...............................................................................................................40
8.2 STV0680B pin description ..................................................................................................46
8.3 STV0680B package dimensions ........................................................................................47
Chapter 9 VV6410/6411 pinout information and package dimensions . . . . . . . . . . . . . . .48
9.1 VV6410/6411 pinout ................................ ........... ........... ........... ..........................................48
9.2 VV6410/6411 pin description ............................................................................................49
9.3 VV6410/6411 package dimensions .......................................... ..........................................51
Chapter 10 VV6500 pinout information and package dimensions . . . . . . . . . . . . . . . . . . .53
10.1 VV6500 pinout ....................................................................................................................53
10.2 VV6500 pin description ......................................................................................................54
10.3 VV6500 package dimensions .............................................................................................56
Chapter 11 Schematics and example parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
11.1 Schematics .........................................................................................................................58
STV0680B+ VV6410/6411/6500
4/63 Version 3.4
11.2 Example parts list ...............................................................................................................58
Chapter 12 Evaluation Kit and Reference design manual . . . . . . . . . . . . . . . . . . . . . . . . . .61
12.1 Ordering details ..................................................................................................................61
12.2 Technical support ...............................................................................................................62
Version 3.4 5/63
STV0680B + VV6444/6410/6500
Revision update
Main changes applied since last release, version 3.3:
●Updated camera defect specification
Introduction STV0680B + VV6444/6410/6500
6/63 Version 3.4
1Introduction
1.1 Digital camera chipset
This document describes the features and functionality of a CMOS chipset, comprising an
STMicroelectronics (ST) CIF or VGA resolution sensor and an STV0680B companion processor
(DCA1), as well as outlining what peripheral components are required/supported in order to
complete a camer a using the chipset. Such a camer a is particul arly suited to du al-mode digital stills
or toy applications.
In stills mode, the camera stores raw image data in memory. The camera carries out no colour
processing, ensuring its simplic ity and low cost. Subsequent download of raw data to a PC or
Macintosh for processing is done through an RS232 or USB interface, through demo software, a
TWAIN driver, or OEM custom application. The license to use the colour algorithm (embedded in
the PC or Mac driver software) is included in the price of the chipset.
A video option is provided, when tethered through USB, which can allow for Video for Windows
applications, and ‘video clips’ can be recorded while untethered by continuously capturing images
while in ‘Continuous’ mode, then downloaded to the PC for playback, using software to create an
AVI file.
Using STV0680B-003, the firmware also includes the capability to trigger a flashgun module
through a two wire interface (enable input and trigger output), and the capability to record audio
sounds into the SDRAM, for subsequent upload to the PC, or to replay audio sounds which have
either been recorded on the camera or dowloaded from the PC (stored on the PC as.WAV files).
Precise design guidelines are available from ST as a reference design (see Section 4). A software
development ki t (SDK) for PC is available fr om ST, to interface to the camer a and pr ovide the basis
for developing a custom software application for stills and/or video, which includes colour
processing software as object code.
Figure 1 : Typical camera system block diagram
CMOS Sensor
Sensor data
STV0680B
USB interface
16M Bit or 64M Bit
SDRAM
Len s +
RS232
I/F
USB
I/F
memory
I/F
RS232 interface
GPIO
Sensor
I/F
PWM
LED
4.5 - 6v Batt ery e.g.
12MH z XTAL
Audio DAC
LCD
Driver
2 x 7 seg. LCD
Push
Transceiver
Piezo
“Mode”
Buzzer
“Shutter
4-5v (Nominal) supply from B attery or USB
3-4 x AA, AAA, etc.
Power
Management
Circuit (Discretes)
Detect Low
Battery
to PC
to PC
Circuit (D iscretes)
Sensor clock
IR Filter
VV6500 (VGA)
VV6410/6411(CIF)
Image Array
Audio
Pre-Amp
Speaker
Microphone
Comparator
Buttons:
/Record”
OEM Flashgun
Enable/Trigger
Module
Audio
Enable/Trigger
Flashgun
Amplifier
VReg
3v3 supply
Subject
Version 3.4 7/63
STV0680B + VV6444/6410/6500 Introduction
1.2 Co-processor choices
Two revisions of the STV0680B are produced by ST. Although there are certain functional
differences between these re visions, both have an identical pinouts and STV0680B-003 retains all
the functionality of STV0680B-001, hence is backwards compatible.
1.3 Sensor choices
The following sensors are supported:
1.4 Key system features
The key features of a typical camera based on the STV0680B chipset are as follows:
1.4.1 Image features (STV0680B-001)
●Support for 5V or 3.3V CIF resolution sensor (VV6444 or VV6410/6411) - 352 x 288 pixels
●Support for 3.3V VGA resolution sensor (VV6500) - 640 x 480 pixels
●80 picture storage capacity possible for CIF, with 64MB memory
●26 picture storage capacity for VGA, with 64MBit memory
Order number STV0680B-001 STV680B-003
Silicon revision STV0680B STV0680B
Firmware revision v1.00 v3.00
Sensor supported VV6444
VV6410
VV6500
VV6444
VV6410
VV6411
VV6500
SDRAM supported 16Mbit
or 64M bi t 16Mbit
or 64Mbit
USB Yes Yes
RS232 Yes Yes
Video for Windows support Yes Yes
Flash-gun support No Yes
Audio record + playback No Yes
Custom sounds No Yes
Table 1 : Differences between STV0680B-001 and STV0680B-003
Sensor Resolution Sensor supply voltage
VV6444 CIF (35 2 x 288) 5v
VV6410/6411 3.3v
VV6500 VGA (640 x 480)
Table 2 : Sensor choices with STV0680B
Introduction STV0680B + VV6444/6410/6500
8/63 Version 3.4
●A greater number of images can be stored when ‘Low’ resolution mode is enabled (e.g. 80
QCIF images with 16Mbit memory, 107 QVGA images with 64Mbit memory). See Table 3.
●Automatic anti-flicker exposure and gain control
1.4.2 Image features (STV0680B-003)
●All image features for STV0680B-001 are supported.
●Support for flashgun.
1.4.3 User features on camera (STV0680B-001)
●Self-timer mode allows a picture to be captured after several seconds.
●Twin 7 segment LCD panel supported - showing number of pictures left, and modes.
●Picture counter helps the user to know how much memo ry is left.
●Un-tethered ‘Continuous’ mo de al l ow s captur e of i mage sequen ce s for stor age i n mem ory and
subsequent download to PC.
●Piezo buzzer indicates a number of useful events to the user, e.g. whether enough light is
present for picture capture, etc.
●Indicator LED.
●“Clear all ” function clears camera.
●“Low Resolution” mode increases number of images wh ich can be captur ed by reducing image
resolution.
1.4.4 User features on camera (STV0680B-003)
●All user features of STV0680B-001 are supported.
●Audio Record function (if audio record hardware detected) allows sounds to be recorded.
●Audio Playback function (if audio playback hardware fitted) allows sounds which have been
recorded to be played back.
●“Delete last” function allows user to delete audio memos, pictures or continuous clips, deletion
must be carried out “most reset first”.
●Camera can be configured by the user to play custom sounds at certain functions, using a PC
application.
●“Go to sleep” function, whereby the camera can be put into standby mode while untethered.
1.4.5 User features on PC software (STV0680B-001)
PC software allows a number of features, including fast download of thumbnail images for picture
selection, and automatic detection and correction of sensor defec ts. The driver compatibility
includes:
●TWAIN driver to suit all TWAIN compatible imaging applications
●Video for Windows PC driver for tethered video mode (through USB), available at all
resolutions, with fastest framerates at QCIF resolution
●AVI video file creation from image sequences captured in ‘continuous’ mode
●Quicktime Video driver and Adobe Photos hop stills plug-in for Mac
Custom OEM PC softwar e can be developed by u sing the SDK (for SDK availabil ity, contact ST), to
upload thumbnails/still images or ‘continuous’ images, e.g. for AVI file creation.
Version 3.4 9/63
STV0680B + VV6444/6410/6500 Introduction
1.4.6 User features on PC software (STV0680B-003)
All PC software written for a STV0680B-001 camera will function with a STV0680B-003 camera
which is only used to take still images/video.
The SDK (version 2.90 or later) allows for:
●the OEM to write a custom application for uploading sound memos, based on the example
LCDC demo software.
●the OEM to write a custom application for downloading custom sounds to the camera, based
on the example CustomSound software.
1.4.7 Power management features and USB compliance
●Retention of pictures, recorded sounds, and downloaded custom sounds with extremely low
power operation, which appears to the user as if the camera is “switched off”.
●Auto power-off after 30sec with no user activity
●Operates from 4.5-6V battery, although system voltage is 5V or 3.3V, dependant on sensor.
●Low battery detection
●Dependant on har dw are co nfi gura tio n, swi tch- over to USB power supply is supported, to al l ow
the device to operate with low batteries or without batteries, when connected to USB.
●Full USB compliance requirements are listed in the USB specification, however, in a camera
designed using this chipset, the following must at least be included: (a) an SDRAM with
sufficiently low self-refresh current, (b) USB inrush protection circuitry, and (c) (in the case of
VV6444 only) a switched 5V sensor supply is used, to maintain sufficient supply voltage to the
5V sensor. See Section 4 for further details.
1.4.8 General features
●High speed picture/sounds upload to PC/Mac over USB
●ST Colour processing algorithms included under license (as part of drivers/SDK)
●USB or RS232 serial interface options, and VfW / TWAIN driver support.
Detailed features STV0680B + VV6444/6410/6500
10/63 Version 3.4
2 Detailed features
2.1 Sensor type and image formats
The sensor type is auto-detected by STV0680B, which ensures that the correct sensor timing is
enabled, and the correct image resolutions are enabled, as shown in Table 3.
For stills photography, ‘High’ or ‘Low’ resolution m ode can be se lected, to gi ve CIF or QCIF pi ctures
from a CIF sensor , and VGA or QVGA from a VGA sensor (see Table 3). Reduced resolution allows
for storage of more images. Images captured in both ‘High’ and ‘Low’ resolution can be stored in
camera memory at the same time. Therefore there is no need for images stored in memory to be
cleared before changing image resolution.
Where USB is connected, the host PC software (through a Video for Windows driver) can activate
tethered video mode, regardless of the user inputs to the camera buttons. In this case, the image
resolution is contro lled by the PC driver.
Note: When tethered VfW video (PC) or Quicktime driver (Mac) is activated, all images or recorded
sounds or video clips will be deleted from the camera SDRAM. A software solution is available
(“Camera control”, as part of the SDK for PC, and “Plug’n Save” for Mac) which can monitor
whether a camera is connected and will warn the user if activating the VfW driver will cause SDRAM
contents to be deleted.
Note: 1 VfW framerate is dependent on PC performance and USB bus loading
2 On a camer a usi ng STV0680B- 003 , the num ber of i mages whi ch can be stor ed is reduced if Aud io
sounds have been recorded on the camera or if custom sounds have been downloaded from the
PC to the camera. The reduction of capaci ty depends on the length of audio cli p, but a rough guid e
is that if 1 CIF image uses the same amount of SDRAM as 10sec of audio, and one VGA image
uses the same amount of SDRAM as 30 sec. of audio.
Sensor Sensor
Image Size Resolution
mode F inal Imag e Size
Max. no. of
images
stored in
16MBit
memory
(Note 2)
Max. no. of
images
stored in
64MBit
memory
(Note 2)
Approximate
VfW framerate
(Note 1)
VV6444 CIF 352 x 288
High CIF 352 x 288 20 80 15 frames/se c.
Low QCIF 176 x 144
(Subsampled) 80 322
(see Note 3)25 frames/sec.
VV6410/
6411 CIF 352 x 288
High CIF 352 x 288 20 80 15 frames/se c.
Low QCIF 176 x 144
(Subsampled) 80 322
(see Note 3)22.5 frames/sec.
VV6500 VGA 640 x 480
High VGA 640 x 480 (6) 26 2 frames/sec.
Low QVGA 3 20 x 240
(Subsampled) (26) 107
(see Note 3)12 frames/sec.
Table 3 : Image modes supported (STV0680B-001)
Version 3.4 11/63
STV0680B + VV6444/6410/6500 Detailed features
3 A CIF camer a wi th STV068 0B-001 and 64Mbit SDRAM can store up to 320 i mag es by using QC IF
mode. Where >99 images are still available, the LCD display will remain at 99. Where (no. of
images available) <99, the LCD display will show the number of images available, as is the case
with all other modes.
2.1.1 VV6444
VV6444 is a CIF resolution, 5V CMOS imaging sensor and has been super seded by VV6410/6411.
2.1.2 VV6410
VV6410 is a CIF resolution, 3.3V CMOS imaging sensor. A brief specification is shown in Chapter 6.
A dual design to support VV6444 and VV6410/6411 is not possible, since VV6410/6411 is a 3v3
sensor. A single footprint for VV6410/6411 and VV6500 is not possible since the package types
differ, however, the same support circuit is used.
For IR filter design, the best choice filter follows the GS0034 dielectric stack filter specification,
which is a vailabl e from ST. An alternative, although not opti mal fi lter, would be Schott S8612 dop ed
glass, also sold as CM500.
2.1.3 VV6411
VV6411 is a CIF resoluti on, 3.3V CMOS imag ing sensor. A brief speci fication is show n in Chapter 6.
The functionality, pixel size, resolution and support circuit are identical to VV6410, however, the
colour filter material is slightly different, and the package type and pinout may differ to VV6410.
Contact ST for further details.
A single footpr int to support VV641 1 a nd VV6500 is not possible because of the package dif ference.
A single foot print to sup port VV641 0 and VV6411 may be possible, dependant on the fina l package
for VV6411.
2.1.4 VV6500
VV6500 is a VGA resolution, 3.3V CMOS im aging sensor. A brief specification is shown in
Chapter 6
A dual design to support VV6444 and VV6500 is not possible, since VV6500 is a 3v3 sensor. A
single footprint for VV6410/6411 and VV6500 is not possible since the package types differ,
however, the same support circuit is used. See Chapter 6.
For IR filter design, the best choice filter follows the GS0034 dielectric stack filter specification,
which is a vailabl e from ST. An alternative, although not opti mal fi lter, would be Schott S8612 dop ed
glass, also sold as CM500.
2.1.5 SDRAM
This is covered in more details in Chapter 4.
2.2 User interface
The user interface supported by STV0680B comprises of user controls, buzzer sounds or
customised audio sounds and visual displays.
2.2.1 Push buttons
The following are the functions w hich are supported by the chip set. These fu nctions ar e achievable
with no more than 2 push buttons.
Detailed features STV0680B + VV6444/6410/6500
12/63 Version 3.4
1 Mode button (Wake-up/Switch between modes): This button allows the user (1.1) to wa ke the
camera up from standby mode when the camera is to be used for taking pictures, or (1.2) to
switch between modes of operation shown in Chapter 3.
2 Shutter b utton (S hutt er/con fir m acti on): This button allows the user to take a picture or confirm
an action, as shown in Chapter 3
The modes of operation are described in Chapter 3.
It may also be desirable to include an on-of f slider switch. This has advantages and disadvantages,
and its exact function is discussed further in the reference design available from ST.
Where a flashgun module is included in the camera, it will be necessary to include a flash on/flash
off push button or slider switch, dependant on the exact flashgun module design. possible
implementations are discussed in a separate application note AN1312 regarding flashgun
implementation, available from ST.
2.2.2 LED indicator
An LED display camera status, i.e. to show that the camera is not in Standby/PC suspend mode .
2.2.3 Picture counter using 2 x 7 segment display
STV0680B stores a picture counter value, which shows how many images can still be captured.
STV0680B supports a 2x7 segment LCD p anel. In ‘Snapshot’ mode and contin uous capture mode,
this LCD panel displays the number of pictures still available, which is useful to identify when the
user is approac hing the maximum number of images which can be stored (see Table 3). It is
possible to clear the i mages stored in memory, in order to con tinue taki ng picture s. In other mode s,
this LCD panel shows displays a 2-character code, which helps the user to navigate around the
modes.
Note: A CIF camera with STV0680B and 64Mbit SDRAM can store up to 320 images by using QCIF
mode. Where >99 images are still available, the LCD display will remain at 99. Where (no. of
images available) <99, the LCD display will show the number of images available, as is the case
with all other modes.
For suitable numeric LCD panel types, see Section 4.8.
2.2.4 Piezo buzzer
An on-chip Pulse Width Modulator (PWM) on STV0680B is used to generate buzzer sounds to
signal certain events . The following are typical of the type of events which are indicated by the
buzzer, and each has its own distinctive sound:
1 Camera has been ‘Woken up’ from standby mode (either by the user pressing a button, by re-
connecting the power source, or by connecting a USB/RS232 connection).
2 Camera has been ‘gone to sleep’ i.e. moved into standby mode. Pictures are retained in
memory.
3 Picture has been successfully taken after the user presses the capture button.
4 Picture has NOT been taken after the user presses the capture button. This indicates to the
user that there is insufficient light, or that the exposure control was not ready due to a rapid
change of lighting in the scene.
5 Picture has NOT been taken after the user presses the capture button, due to picture counter
having rea ch ed the maxi mum num ber of i ma ges. The u ser has the cha nce to zer o th e counte r
if desired.
6 End of continuous capture in un-tethered ‘Continuous’ mode, due to memory full.
7 Self-timer activated and counting down.
Version 3.4 13/63
STV0680B + VV6444/6410/6500 Detailed features
2.2.5 Custom sounds
A camera which includes STV0680B-003 and Audio playback hardware can have a set of custom
sounds downloaded from a PC application. A different sound can be associated with each of the
following functions:
Note: 1 Where a given function has a sound associated with it stored in SDRAM, the piezo buzzer does not
give any beeps for that function. Not all functions need to have custom sounds associated with
them, this is the choice of the user or OEM.
2A demonstration PC appli cation “CustomSounds” is available from ST, however this is not intended
for end-users. Source code is available which allows the EOM to build their own PC application
using the SDK.
2.3 Battery level detect and USB auto-switch
An on-chip battery level detector on STV0680B detects when the battery voltage falls below a
threshold. This threshold is determined by the designer, dependant on the perception of what
remains as ‘acceptable’ image quality as the battery voltage falls. The chosen threshold level is
determined by a r esistor val ue, as shown in Chapter 6 Where no USB has been detected, the LCD
display fla shes, which indica tes that the battery is low . Whe re a USB connection ha s been detected,
the camera sources power from USB, if certain additional hardware is fitted.
Note: It may be a requirement of certain USB compliance tests that such additional hardware is included
in the ca mera de sign, in order to e nable th e camera to switch to supply fr om USB and hence r eport
back to the PC while connected to the USB bus without a battery.
2.4 Audio record and playback
2.4.1 Record
A camera whic h includes STV0680B-003 and a mi croph one, compar ator and other per i pher y (a lso
utilizing the sensor pre-amplifier) can be used to record sounds which are stored in the same way
as images. STV0680B-003 will auto-detect the presence of Audio record hardware and include
Power On Sound delete
Power Off Continuous clip delete
Goo d pi cture Cl ear memory
Bad picture
(Normally due to insufficient light) Confirm action
Memory full Low power
Self t i m er #1 Flas hgun ON
Self ti m er #2 Flas hgun OFF
Low resolution Flashgun Trigger
High resolution Frequency 50kHz
Picture del ete Fre q uency 60kHz
Table 4 : List of custom sound functions
Detailed features STV0680B + VV6444/6410/6500
14/63 Version 3.4
audio record and “delete last” functions into the user interface. T he audio sampl e rate is 11.025kHz,
and the signal is digitised using a successive approximation A-D converter with 8 bits resolution.
The SDRAM stores 1 second of Audio recording per 11k Bytes of memory.
2.4.2 Playback
A camera which includes STV0680B-003 and an amplifier, speaker/headphone socket, and other
periphery, can be used to playback sounds which were either recorded on the camera or
downloaded from the PC.
The quality of Aud io pl ayback is l argel y depe ndant on the type of speaker used, an d on the correct
mounting of the speaker in the camera plastics.
2.5 PC interface options and software support
Either USB Interface (full speed 12Mbit/sec. max.) or RS232 interface (115.2Kbaud) is supported
by the chipset, with driver software available from ST for both. The interface type is auto-detected
by the chipset. PC software can be one of the following:
1 Simple image upload demonstration software supplied by ST, allowing uploading of stills or
‘continuous’ images. This software should not be supplied as an end-user product.
2 TWAIN driver to suit all TWAIN compatible imaging applications
3 Video for Windows driver for tethered video mode (USB only)
4 Custom end-user software developed by OEM using SDK (for SDK availability, contact ST).
The SDK is supplied by ST as a 32-bit DLL format, running on Windows 98, and accessed
through a documented software interface. This provides the basis for developing a custom
software application for uploading stills and/or video.
2.5.1 USB
Complete images (displayed as either thumbnails or in full resolution), or the entire SDRAM
contents (e.g. for uploading continuously captured image sequences, recorded using ‘Continuous
Capture’ mode) can be downloaded through USB, and USB connection also allows for tethered
video mode to be activated by the USB driver.
Thumbnail imag e download i s extremely fast for the enti re memory cont ents in the cam era. Once a
picture is selected for downlo ad, full image down lo ad ta ke s appr oxi mately 0.15 seconds per image
for a CIF image (0.6 seconds for a VGA image), plus post processing time per image.
For USB interface details, see Section 4.4.
Note: Actual USB download and post proc essing time also depends on PC performance and USB bus
loading
2.5.2 RS232
Thumbnails of im ages, complete stored images, or the enti re SDRAM contents can be downl oaded
through RS232, but tethered video is not supported.
Once a picture is selected for download, full image download takes approximately 10 seconds per
image for a C IF i mage ( around 30 seconds for a VGA i mage ), plu s post p rocessi ng t ime per image
(of the order of 1 second approximately).
For RS232 interface details, see Section 4.5.
Note: Actual post processing time after RS232 download also depends on PC performance
Version 3.4 15/63
STV0680B + VV6444/6410/6500 Detailed features
2.6 Anti-flicker exposure and gain control
2.6.1 General
The chipset operates automatic exposure and gain control for either 50Hz or 60Hz mains -driven
indoor lighting, using the same 12MHz crystal. This improves pictur e quality by selecting a set of
exposure values wh ich mi ni mise ‘flicker’ effects. D etection o f the mains fr equen cy is dep endan t on
the status of the GPIO3 pin, which can be achieved by population of a PCB link at a late stage in
production, once the country of destination is known, without the need to change the crystal
frequency.
The auto exposure and gain algorithm is always enabled during Snapshot’/self-timer/continuous
mode. When t he shutter butt on is pressed in ‘Snapshot’ mode , the chipset captu res an image if the
exposure and ga in value has reached a suitable val ue for the current scene. If the li ght detected has
suddenly changed, the c amera may emit an audible tone to indicate that more time is required to
reach the correct exposure target. In ‘Snapshot’ mode the chipset only captures the image data if
sufficient light is present in the image. In continuous capture mode, the chipset captures images
regardless of whether enough light is present.
The exposure control algorithm in STV0680B chooses exposure values which minimise “flicker”
effects from occurring under fluorescent lighting. STV0680B can only prevent flicker in lighting
powered by 50Hz or 60Hz electricity supply, but automatic detection of the flicker frequency is not
possible. Hence cho osing the correct anti-fli cker setting is importan t, in order to prevent da rk stripes
form appearing across the image, and this selection must be done in hardware.
Figure 2 : Illustration of flicker problem
2.6.2 Flashgun exposure
Where STV0680B-003 and a fla shgun module are included in the camera, and the flashgun enable
signal is HIGH, the exposure mode will operate in a different manner. The CMOS sensor
progressive scan readout requires that the sensor is set to maximum exposure so that all lines are
being exposed at a certain point in time.
The “window” within which the flashgun needs to fire in order to correctly expose all sensor lines is
of the order of a few 100µsec (contact ST for more precise details), therefore the flashgun module
design should have reached maximum light output within this period after the falling edge of the
flash trigger output from STV0680B-003.
Possible flashgun implementations, regarding hardware interface, charge sensing, and flash
energy required are discussed in a separate application note AN1312 regarding flashgun
implementation, available from ST.
Flicker setting not co rrect Flicker se tting correct
Camera modes of operation STV0680B + VV6444/6410/6500
16/63 Version 3.4
3 Camera modes of operation
This section refers to the two switches as discussed in section Section 2.2.1
●“Mode”: connects GPIO0 pin of STV0680B to GND when pressed
●“Shutter”: connects GPIO1 pin of STV0680B to GND when pressed
Pressing the mode switch repeatedly cycles through a series of modes as displayed on the LCD.
When a given mode is displayed it may be selected by pressing the shutter button. If an option is not
selected within 5 seconds the disp lay will revert to showing the number of available p ictures.
3.1 Modes available (STV0680B-001)
Figure 3 : STV0680B-001modes (CIF camera with 16Mbit SDRAM assumed)
Note that the number of images displayed depends on the sensor and SDRAM type - see Table 3.
Normal: 20 / 80
Continuous Cap ture: Ct
Self-Timer: St
Clear All: CL
Re so lu t io n: Hr / L r
Press Mode button
After 30s ec of inactivity
Standby mode (untethered)
Version 3.4 17/63
STV0680B + VV6444/6410/6500 Camera modes of operation
3.2 Modes available (STV0680B-003)
Figure 4 : STV0680B-003modes (CIF camera with 16Mbit SDRAM assumed)
3.3 Description of modes
Note that certain modes are only available using STV0680B-003, and with appropriate hardware
fitted on the camera.
3.3.1 Standby mode (untethered) and Wake-up
On power-up, or wake-up from untethered standby mode, (i.e. by pres sing the Mode button), the
camera will beep twice. The LCD will briefly indicate the camera resolution either ‘Hr.’ for high
resolution (80 CIF or 26 VGA imag es - using 64Mbit memory) or ‘Lr’ for low resolution (322 QCIF or
107 VGA images - using 64Mbit memory) and then display the number of pictures which may be
taken. Please note that i n Low Resolution Mode, al though there can be up to 322 images available,
the LCD counter will only go up to 9 9, it will contin ue reporting 99 un til there are less than 99 images
left.
The camera will go back to standby mode either after 30 seconds of inactivity, LED1 will turn off and
the LCD wi ll go blank. Thi s can also be done (STV0680B-00 3 only) by pre ssing the mode swi tch for
more than 2 seconds.
3.3.2 Normal mode
Pressing the shu tter but ton w i ll take a pi cture . T he camer a wi ll beep. A high pitched beep indi cates
that the picture was taken successfully and the counter will decrement (if there are less than 99
images left to take). A low beep indicates insufficient light to take a picture. A series of beeps
indicates that the camera is full.
Normal: 20 / 8 0
Audio Record: Ar
Audio Playback: AP
Delete Last : dA / dP / dC
Continuous Cap ture: Ct
Self-Tim er: St
Clear All: CL
Re so lu t io n: Hr / L r
Notes:
1. Audio R ecord on ly available if audio hardware is fitted
2. Audio Playback only available once an audio clip has been recorded
3. Delete Last displays (only available if audio hardwa re fitted)
dA - if the last object is an audio clip
dP - if the last object is a picture
dC - if the last object is a continuous capture clip
The mode is inhibited if the camera is e mpty.
4. Continuous Capture mode is inhib ited when the flashgun is enabled
(SW6 dow n)
Press Mode button
After 30s ec of ina ctivity
Standby mode (untethered)
Camera modes of operation STV0680B + VV6444/6410/6500
18/63 Version 3.4
Stored pictures m ay be uploaded t o a PC at any ti me, whether or not the camer a is full. Plugging the
USB connector into the came ra will cause it to reset and issue a double b eep but all stored p ictures
will remai n. When the USB connector is unplugg ed the camera will go to sleep. When connected to
the PC the camera may still be used in the normal way.
Note: With the flashgun enabled (STV0680B-003 only) the camera will always take a picture,
whether or not there is sufficient light.
3.3.3 Audio record - Ar
This mode is available on STV0680B-003 only, with audio record hardware fitted.
Pressing the shut ter button within 5 secon ds w ill cause the camera to start recording for as long as
the shutter button i s pressed down. If the shutter button is not pressed wi thin 5 seconds the camera
will revert to normal picture taking mode. Whilst recording, the LCD display flashes ‘Ar’. If the
recording stop s because the memory i s full, the ‘mem ory fu ll’ audio to ne is sounded and the displa y
will stop flashing and display ‘00’. The audio data is digitised and stored in SDRAM.
3.3.4 Audio Playback - AP
This mode is available on STV0680B-003 only, with audio playback hardware fitted.
Pressing the shutter button within 5 seconds will cause the camera to play back the most recent
audio recording. If the shutter button is not pressed within 5 s econds the camera will revert to
normal picture taking mode. Whilst playing, the LCD display flashes ‘AP’.
Once in Audio Playback mode, repeated presses of the shutter bu tton will step the camera through
each of the audio recordings in the camera (most rec ent first). Keeping the shutter button pressed
down will also cycle through the audio recordings. Pressing the mode button during playback will
stop the audio clip.
Note: Minimum audio recording length is set to 0.5 seconds.
3.3.5 Delete last object - dA/dP/dC
This mode is available on STV0680B-003 only, with audio record hardware fitted.
If the last object captured was an audio recording 'dA' (delete audio) will be displayed, if the last
object was an image, then 'dP' (delete picture) will be displayed, or, if the last object was part of a
continuous capture sequence, then 'dC' (delete continuous) will be displayed. If the camera is
empty, the mode will be suppressed. The mode works in the same way as ‘CL’ (Clear All), i.e. once
the mode is sel ected , pressing the shutter button o nce will cause t he cam era to beep and ‘dA’, ‘dP’
or ‘dC’ to start flashing. Pressi ng the shutter button aga in wi thin 5 secon ds will del ete the l ast audio
clip, picture or continuous capture sequence.
Version 3.4 19/63
STV0680B + VV6444/6410/6500 Camera modes of operation
3.3.6 Continuous mode - Ct
Pressing the shutter button within 5 seconds will cause the camera to start taking pictures for as
long as the shutter button is pressed down (and the camera is not full). If the shutter button is not
pressed within 5 seconds the camera will revert to normal picture taking mode.
Note: 1 During continuo us mode the cam era wi ll allow picture s to be take n regardl ess of the ava ilable li ght,
which could result in insufficient exposure.
2 In co ntinuous mode, only every alternat e field is grabbed hence captur e rate is halved. E.g. 12.5 fps
CIF and 7.5fps VGA
3 On STV06 80B- 003, C ontinuous Mode is suppressed when the FlashGun enable signal (GP IO2) i s
high.
3.3.7 Self timer - St
Pressing the shutter button will now start a 10-second self-timer . The camera will issue a short beep
every second and then a longer beep. A further beep will then indicate that the picture has been
taken (high beep - pi cture succe ssful, low beep - insufficient lig ht, pi ctur e not taken) . The sel f-ti m er
mode can not be selected when the camera is full. The self-timer countdown cannot be stopped
once it has started.
3.3.8 Clearing the camera memory - CL
Pressing the shutter button once will cause the camera to beep and the ‘CL’ to start flashing.
Pressing the shutter button again within 5 seconds will clear all the images/audio clips in the
camera and reset the counter.
3.3.9 Changing picture resolution - Hr/Lr
The resolution option is displayed, either Hr. to change to high-resolution mode (if currently in low-
resolution mode) or Lr to change to low-resolution (if currently in high-resolution mode). Press the
shutter button within 5 seconds of selecting the resolution option, the camera will beep and the
display will reset indicating the number of pi ctures available in the new mode. The picture resolut ion
can be changed at any time, i.e. the camera can store both high and low resolution images.
STV0680B hardware interfaces STV0680B + VV6444/6410/6500
20/63 Version 3.4
4 STV0680B hardware interfaces
4.1 STV0680B pinout
The STV0680B pinout has been carefully developed to minimise the physical size of the support
printed circuit board by facilitating placement of and electrical routing to peripheral support
components such as the SDRAM. The complete pinout and listing is shown in Chapter 6
4.2 Sensor interface
STV0680B uses a standard ST digital interface from the sensor, and the sensor clock input is
provided by an output from STV0680B. Designing a camera using this chipset should design as
close as possible to the reference desig n (Chapter 6), in which case the chipset can be regarded as
a functional ‘black box’, and no further details regarding the STV0680B-sensor interface are
required.
4.3 Memory inter face
STV0680B is designed to interface to an external 16Mbi t or 64Mbit SDRAM (see Table 3). The
SDRAM device must have a 16 bit wide data bus and operate from a 3.3V supply. Two sizes of
SDRAM memory are supported by STV0680B, 16MBits (1M x 16 bits wide) or 64MBits (4M x 16
bits wide), the memory size is auto-detected by STV0680B. STV0680B clocks the SDRAM at
6MHz, typica lly this is well below the fi gures offer ed by most manufacturers ’ devices. Devices which
are PC66 and/or PC100 compliant are preferred. For interface wi ring, see Chapter 6
4.3.1 SDRAM current consumption
For maximum system battery life while no pictures are being taken, and to assist in meeting
requirements for USB compliance, an SDRAM should be chosen with the lowe st possible self
refresh current specification. For suggested SDRAM part numbers, see Chapter 6
In addition, the USB suspend mode curre nt specifi cati on r equi re s that the ca mer a will consume no
greater than 300µA when un-tethered. Meeting this specification, which is included in the
requirements for USB compliance, assumes an SDRAM with up to approximately 250µA self-
refresh current, based on a current consumption of approximately 50µA for STV0680B+support
circuit.
4.3.2 SDRAM interface timing requirements
The following timing diagrams should be referred to when selecting SDRAM other than those
recommended in Chapter 6
Version 3.4 21/63
STV0680B + VV6444/6410/6500 STV0680B hardware interfaces
Figure 5 : SDRAM read timing (16Mbit device, burst read)
Figure 6 : SDRAM write timing (16Mbit device, burst write)
DCLK
Command
DQM
A0-9,BA
A10
ACTIVE READ NOP PRECHARGE NOP
ROW COLUMN
ROW
DOUT M DOUT M + 1 DOUT M + 2 DOUT M + 3
DQ
READ Latency
tCK
t
RCD
t
RC
CKE
t
RAS
DQ sam p le DQ sample DQ sample DQ sample
t
RP
tCMS tCMH
tAS tAH
tLtH
tCMS tCMH
t
AC
t
OH
DCLK
Command
DQM
A0-9,BA
A10
ACTIVE WRITE NOP PRECHARGE NOP
ROW COLUMN
ROW
DIN M DIN M + 1 DIN M + 2 DIN M + 3
DQ
tCK
t
RCD
t
RC
CKE
t
RAS
t
RP
tCMS tCMH
tAS tAH
tLtH
tCMS tCMH
t
DS
t
DH
STV0680B hardware interfaces STV0680B + VV6444/6410/6500
22/63 Version 3.4
Table 5 : Timing parameters for SDRAM read/write
4.3.3 SDRAM refresh period
The SDRAM refresh period from STV0680B is guaranteed to be no greater than 15.6µS during
‘Snapshot’/self-timer/continuous/tethered video modes of operation (i.e. not standby mode). In
standby mode, the SDRAM is set to self-refresh, therefore no refresh from STV0680B takes place.
4.3.4 SDRAM initialisation period
The SDRAM initialisation period is currently set to 981µS in STV0680B.
4.4 USB interface
STV0680B includes a USB Version 1.1 compliant Un iversal Serial Bus Interface, including a
transceiver. This allows direct connection from STV0680B to a USB connector with minimal
additional hardware (i.e. a small number of passive discretes) - see Chapter 6
The USB in terface interf aces the STV0680B to the USB at full speed 12MHz da ta rate. Some o f the
features are:
●Compliant with USB protocol revision 1.1.
●USB protocol handling.
●USB device state handling.
●Clock and data recovery from USB.
●Bit stripping and bit stuffing functions.
●CRC5 checking, CRC16 gener ati on and checking.
●Serial to parallel conversion.
●Single bulk end point.
USB drivers are supplied by ST. For USB timi ng information, please refer to the USB specification
V1.1.
Symbol Min. Max Units Symbol Min. Max Units
tCK 166.45 166.89 ns tDS 81.01 ns
tCH ½tCK tDH 83.41 ns
tCL ½tCK tRCD 1tCK
tAC ½tCK tRAS 55tCK
tOH 0ns
tRC 7tCK
tCMS 82.88 ns tRP 2tCK
tCMH 82.85 ns tRCD 1tCK
tAS 82.88 ns tAH 82.76 ns
Version 3.4 23/63
STV0680B + VV6444/6410/6500 STV0680B hardware interfaces
4.5 UART module for RS23 2 interface
The UAR T modu le on STV06 80B p rovides a 115200 baud ful l dupl ex inte rface to an external Host.
4.5.1 RS232 physical interface
STV0680B does not support direct connection to a serial link. Physical line driver circuitry is
required, e.g. using a standard RS232 transceiver chip, or by using a small number of low cost
discretes (as shown in Chapter 6). The schematics shown assume a 3 core cable with a length of
no greater than 2m. U nscreene d cable can be used, a suitable l ow cost connector is a 3. 5mm audio
jack plugs/sockets.
4.5.2 UART module overview
Receiving data
The UART module in STV0680B receives serial data through the RXD pin. Data reception is
initiated by a 1-to-0 transition on RXD, and the received data is sampled every 8.66µS.
If the RXD input is not 0 when the incoming data is first sampled, the UART module goes back to
look for another 1-to-0 transition . This i s to pr ovi de r ejection of false start bits. If the start bit proves
valid, reception of the rest of the frame will proceed.
Transmitting data
When a transmission is activated by STV0680B, the contents of an internal transmit shift register
are shifted onto the TXD pin, every 8.66µS.
The UAR T operates at 12M Hz, which is not an integer multiple of 115200, so the actual baud rate is
115232 +/- 0.3%, which is well within the requirements of a typical 16x oversampling UART, which
can tolerate a 3.75% error in baud rate.
4.6 Power management and battery type
STV0680B and t he SDRAM require a 3.3V sup ply. Where a VV6410/6411 or VV6500 (3.3 v) sensor
is used, a singl e voltage regulator can be used to regula te the su pply for all t hree compon ents from
the battery, or the sensor on-board VReg can be used. Where a VV6444 is used, the sensor
requires a 5V supply, hence a DC-DC converter is recommended to provide enough voltage when
the camera is powered from the USB bus. These are explained more fully in the reference design.
4.6.1 Power switching to USB
Included in the USB compli ance requiremen ts, is the ability of the camera to report to the PC when
connected to the USB bus, whether or no t there is a fresh battery in the camera. This means that
power sourcing from USB is required, which also saves on battery life while the camera is used in
USB tethered video mode. In orde r to allow switching from battery to USB power, some additional
hardware is required (see also Chapter 6):
●The USBDETECT input to STV0680B is used to detect that a USB power supply is connected
●If the USB is detected, additional hardware is used to switch off the battery
●An inrush protection circuit can protect the USB bus from current draw in the case of a low
battery/battery not fitted. This may be necessary to comply with the USB specification.
For precise USB compliance requirements, please consult the USB specification version 1.1
4.6.2 Switched sensor supply
Dependant on the hardware implementation, the SENSPWR output from STV0680B can be used to
power off completely the sensor during Standby mode (in the case of VV6444) or put the sensor
STV0680B hardware interfaces STV0680B + VV6444/6410/6500
24/63 Version 3.4
into Suspend mode (in the case of VV6410/6411/6500). This has a significant improvement on
battery life.
4.6.3 Battery type
This is hardware dependant. The schematics referr ed to in Chapter 6 assume either three or four
1.5V cells.
4.7 Quartz crystal
Regardless of the sensor type or anti-flicker requirements, the sensor + STV0680B chipset
operates from a single 12MHz fundamental quartz crystal. For specification requirements, see
Table 13. STV0680B in cludes an on-chip low jitter PLL, for PLL characteristics, see Table 12.
4.8 Numeric LCD interface
STV0680B supports a 2-digit LCD panel only, for alpha-numeric display.
4.8.1 LCD types
STV0680B connects to a non multiplexed, direct drive LC D with 2 x 7 segments. Many LCD types
are compatible with this interface. The LCD refresh frequency is 34.7Hz.
4.8.2 LCD interface pinout
The convention for segment numbering is as follows: ’0’ connects to segment ’a’, ’1’ connects to
segment ’b’, and so on, where a to g are standard for all 7-segment displays, as well as an LCD
common output, giving fifteen signals in total.
4.9 Switches and LED’s
The GPIO lines on STV0680B have pre-defined functions as follows, see Section 2.2 for user
interface functionality, and Chapter 6 for prec ise hardware implementation
4.9.1 MODE push button and SHUTTER push button: GPIO0 and GPIO1
Both push button inputs have int ernal de-bounce circuits, reducing the amount of hardware required
externally. It is recommended that labelling is used on the camera casing to help the user
understand the functioning of the 2-button interface.
4.9.2 Input to select between 50 and 60Hz flicker frequency: GPIO3
This allows for factory setting of the anti-flicker frequency, dependant on the final country of
destination. See also Section 2.6. T h e polarity of this selection is detailed in the reference design
(see Chapter 6).
4.9.3 LED indicator output: GPIO5
The LED output has an 8mA current sinking capability.
4.9.4 Other pins: GPIO2, 4, 6, 7
With STV0680B-001, these pins are un-used and should be tied to GND.
Version 3.4 25/63
STV0680B + VV6444/6410/6500 STV0680B hardware interfaces
With STV0680B-003, these pins are used, as detailed in Table 6.
Their specific functions are detailed in the reference design and in the following documents
available from ST:
●Audio: Application note AN1310
●Flashgun: Application note AN1312
4.9.5 Audio record hardware interface (STV0680B-003 only)
The firmware implements a successive approximation A/D conversion by outputting successive
analogue levels through the DAC output, which are compared with the actual signal level (output
from the sensor micro phone pream plifier ), and the result ant high or low signal from the compar ator
is read at GPIO4. The sampling frequency is 11kHz, and the successive approximation is done at 8
bits resolution per sample. It i s not possible to speed u p the sampling fr equency due to the li mitation
of STV0680B firmware speed.
An actual hardware implementation is given in the audio application note AN1310.
4.9.6 Audio playback hardware interface (STV0680B-003 only)
The firmware outputs the desired signal level through the DAC output, which is amplified to the
speaker or headphone socket. GPIO6 is used to switch off the amplifier during periods of audio
recording, to prevent the successive approximation waveform from being heard during periods of
recording, and to reduce the power consumption and unwanted crackle through the speaker.
An actual hardware implementation is given in the audio application note AN1310.
4.10 Flashgun hardware interface (STV0680B-003 only)
STV0680B-003 will re vert to flashg un exposure w hen it dete cts GPIO2 is high . Ideally t he hard ware
should combine the two factors of (a) user inten tion (e.g. user swi tches on flashgun) and (b) charge
sensing (i.e. flash is charged up and ready to fire).
These two factors (a) and (b) are independent, since there may be a delay of several seconds
between switching on the flashgun charge r , and the flashg un being able to fi re. To revert to flashgun
exposure before the flashgun is completely charged up would cause very bad pictures to be taken
in low light con dition s because ther e is no “lo w l igh t” th reshold when flashgun exposure is enabled,
since the camera expects a flash to fire. A suggested flashgun hardware in terface is given in the
flashgun application note AN1312.
When flashgun exposure is enabled and the shutter button is pressed, a picture will be taken and
the flash trigger pin GPIO7 will be pulsed low at the correct point in time so that all lines of the
CMOS imager are exposed.
4.11 IR filter
An Infra-Red Blo cking Fi lte r is re qui red to achi eve corre ct colour r esponse. T he exact specifi cati on
for the IR filter characteristics are given in the reference design manual.
GPIO 2 4 6 7
Audi o Reco rd No Ye s No No
Audio
Playback No No Yes No
Flashgun Yes No No Yes
Table 6 : Other GPIO usage with STV0680-003
Software support STV0680B + VV6444/6410/6500
26/63 Version 3.4
5 Software support
5.1 General features
The chipset is a dual-mode camera, i.e. stills and video, and is supported by a range of
demonstration software, standard drivers, and software development options.
Driver software is available to support both USB and RS232 interface including standard TWAIN
and video for Window s drivers (VfW through USB onl y) for Win98/ Win2k/WinME. Quicktim e drivers
and a Photoshop stills plug in for MacOS 8.6/9.0/9.1 are also supported.
Example software applications (PC only) are provided to create .AVI video files from untethered
continuous capture of images (AVICreator), to upload still images and recorded sounds
(LCDCdemo) a nd to download .W AV files from the PC to the camera (CustomSound). In each case,
PC source code is provided to assist in OEM software development using the SDK.
ST colour processing and defect detection/correction software runs on the host and is supplied
under licence agreement, as part of all host software/drivers/SDK.
5.1.1 Still image upload
This is avail able th roug h demonstrat ion softwa re, OEM custom softw are, or using sta ndard TWAIN
applications. Features include:
●Fast upload through USB, or upload through RS232.
●Colour display of image thumbnails for picture selection.
●Download of full image once selected by user software.
●Automatic detection and correction of sensor defects
●Colour processing of full image, using the ST colour process
The above features a lso a pply to “AVI Creator” or any OEM cu stom software for AVI video creati on
from pictures taken while un-tethered, since this is essentially a “stills” function.
5.1.2 Streaming video (only while tethered to USB)
This is availabl e through demonstration software, or using standard VfW applications. Features
include:
●Streaming video through standard VfW driver
●Automatic detection and correction of sensor defects
●Colour processing of full image, using the ST colour process
5.2 Software installation
The following software support is only available to OEMs. Access to the latest installation files is
possible through a password-protected web page, contact ST for details. The install file gives the
option to install:
●Drivers (always check web site for latest driver version).
●EVK software, i.e. LCDCdemo.exe and AVIcreator.exe, G2Video.exe, and CTItest2.exe
●SDK installation: source code for sample applications, and documentation
Version 3.4 27/63
STV0680B + VV6444/6410/6500 Software support
5.2.1 Driver support available
5.2.2 EVK software
Note: The following i s also supplied wi th evaluati on kits/demonstr ation unit s, but all the fo llowing softwa re
is only for dem onstra tion purposes and should N OT b e supp li ed as an end- user pr oduct. How ever,
application-level source code (i.e. not dr iver/colour processing source) for LCDCdemo.exe, AVI
creator, and CTItest.exe is availa ble as part of the SDK, wh ich allows simi lar applicati ons to be built
by the software developer:
1 Simple demonstration software LCDCdemo.exe for uploading thumbnails and images.
2AVIcreator.exe software for uploading continuous images for creating ‘movie’ clips.
3G2Video.exe is a VfW application which shows streaming video while tethered to USB and
allows creation of.AVI video clips.
4CTItest.exe is only for debugging purposes, for software developers using the SDK
5.2.3 Software Development Kit (SDK) and source code
A software development kit allows the OEM to develop a custom application which calls the same
range of drivers as listed in Section 5.2.1, hence allowing the OEM application to perform picture
download, thumbnail display, and colour processing using the ST colour process. Inclus ion of
source code for the applications listed in Section 5.2.2 allows the software developer to use these
as the basis for their own application.
The SDK is supplied by ST as a 32-bit DLL format, running on Windows 98/Win2KTM, and accessed
through a documented software interface. Development requires Microsoft Visual Studio Ver. 6 or
later. This provides the basis for developing a custom software application for stills.
Note: Source code for PC Drivers, Defect Co rrection, and Colour Processing algorithm s are not available.
Interface type: RS232 USB
PC Operating system: Win9x, WinNT4, Win2k, Windows
Millennium Win98 and W i n2k only, Window s
millenium
Mac OS N/A 8.6, 9.0, 9.1
STV0680B-001 TWAIN TWAIN, VfW
STV0680B-003
Tabl e 7 : Dr iver choices
Detailed chipset specifications STV0680B + VV6444/6410/6500
28/63 Version 3.4
6 Detailed chipset specifications
6.1 Typical camera specifications
The followin g data assumes that the camera has been bui lt according to referen ce design shown in
Chapter 6
Supply Voltage 4.1-6V (whe n powered from ba t tery or USB)
Operating T emperature range 0oC - 40oC
Max. RS232 cable length supported 2m
CIF output 352 x 288 pixels
QCIF output 176 x 144 pixels
VGA output (using VV6500) 640 x 480 pixels
QVGA output (using VV6500) 320 x 240 pixels
SDRAM storage and image upload format Raw Bayer
PC driver output format Col our RGB bi tmap
Table 8 : Typical camera specifications
Note: 1 Dual USB or battery power supply is only possible when the required power switching
hardware is included, as shown in Chapter 6
2 Figures are approximate and depend on actual components sources.
Sensor Min. Max
VV6444 8.18µS39mS
VV6410/6411 8.67µS44mS
VV6500 7.94µS66mS
Table 9 : Approximate shutter speeds
Version 3.4 29/63
STV0680B + VV6444/6410/6500 Detailed chipset specifications
6.2 STV0680B companion processor
Note: 1 VDI = |(D+) - (D-)|
2V
CM includes VDI range.
3TF
RFM =(TFR / TFF).
Parameter Min. Typ. Max. Units
Supply voltage 3.0 3.3 3.6 V
Current consumption (nor m al operati on) 20 - mA
Stand-by current consumption
(untethere d standby or tether ed PC sus pend mode) --5µA
Operating temperature range 0 - 70 °C
Package 100QFP
Exposure control 1 000 000 : 1
Storage Temperat ure (Approx i ma te) 50 to 15 0 oC
Table 10 : STV0680B specifications
Parameter Description Min. Typ Max Units Notes
VDD Power Supply 3.0 3.3 3.6 V
VILU USB differential pad D+/D- input low 0.8 V
VIHU USB di ffe rential p a d D+/D- input hig h (drive n) 2.0 V
VIHUZ USB differential pad D+/D- input high (floating) 2.7 3.6 V
VDI USB differential pad D+/D- input sensitivity 0.2 V 1
VCM USB differential pad D+/ D- common mode voltage 0.8 2.5 V 2
VOLU USB differential pad D+/D- output low voltage 0.0 0.3 V
VOHU USB differential pad D+/D- output high voltage 2.8 3.6 V
VCRS USB di ffe rential pad D+/D - output s i gnal cro ss over
voltage 1.3 2.0 V
RPU USB di ffe rential pad D+/D - pull up resistor 1.425 1. 575 kΩ
RPD USB di ffe rential pad D+/D- pull-down resistor 14.25 15.75 k Ω
TFRRise Time 4 20 ns
TFFFall Time 4 20 ns
TFRFM Differential Rise Time and Fall Time Matching 90 111.11 % 3
ZDRV Driver Output Resistance 28 44 Ohms 4
Table 11 : STV0680B USB specifications
Detailed chipset specifications STV0680B + VV6444/6410/6500
30/63 Version 3.4
4Z
DRV includes an external resistor of 20 Ohms serial to this transceiver.
6.3 VV6444 sensor
This has been superseded by VV6410/6411
Parameter Conditions Symbol Min. Typ Max Unit
Peak to peak jitters @VCOf re q = 100MHz ~ 200MHz -- -- 170 220 ps
Duty cycle -- 40 50 60 %
Operating vo l tage range VDD 3 3.3 3 .6 V
Input low voltage VDD=3.3V VIL - 0.8 V
Input high voltage VDD=3.3V VIH 0.7VDD VDD V
pull in Tim e + Loc king
Time Ready -- -- 0.5 ms
Output Slew Rate CL: Output Load (pF) Tsr(Fout) -- 0.100+0.1082*CL -- ns
Table 12 : STV0680B PLL character is tics
Parameter Min. Typ Max Units
Crystal specific at ion 50/50/10/3 0 (12 MHz fu ndament al )
Crystal frequency 12.000 MHz
Frequency tolerance 50 ppm
Temperature stability 50 ppm
Operating temperature -10 Deg. C
Load capacitance 30 pF
Table 13 : STV0680B crystal toler an ce
Colo ur I mage Format 352 x 288 pixel s (CIF)
Pixel Size 1 2.0 x 11.0µm
Imag e array size 4.272mm x 3. 212mm
Array Format CIF
Sensor sign al / Noise ratio Approx. 48dB (* See Note 1)
Supply Voltage 5.0V DC +/-5%
Table 14 : VV6444 specifications
Note: 1 48dB refers to VV6404. With the addition of microlenses on VV6444, an increase in
sensitivity can be expected.
2 Where the sensor is complet ely powered off by a FET or swi tch (external har dware) during
the Standby/PC Suspend Mode.
3 Where the FET/switcher is not implemented, and the sensor is powered throughout
Standby/PC Suspend Mode, however the sensor clock is disabled.
Version 3.4 31/63
STV0680B + VV6444/6410/6500 Detailed chipset specifications
Package type 48LCC
Operating Tem p. range 0oC - 40oC
Current consumption Min. Typ Max Units
’Snapshot’/self-timer/continuous/tethered video
modes of oper ation 30 mA
Stan d-by/PC S uspend M ode, sensor powered o ff
(see Note 2)Negligible µA
Stan d-by/PC S uspend M ode, sensor powered o n
(See Note 3)Approx. 300 µA
Table 14 : VV6444 specifications
Note: 1 48dB refers to VV6404. With the addition of microlenses on VV6444, an increase in
sensitivity can be expected.
2 Where the sensor is complet ely powered off by a FET or swi tch (external har dware) during
the Standby/PC Suspend Mode.
3 Where the FET/switcher is not implemented, and the sensor is powered throughout
Standby/PC Suspend Mode, however the sensor clock is disabled.
Detailed chipset specifications STV0680B + VV6444/6410/6500
32/63 Version 3.4
6.4 VV6410/6411 and VV6500 sensors
Note: 1 Assuming appropriate external hardware recommendations are implemented (see Chapter 6), the
sensor SUSPEND pin is asserted during Standby Mode/PC Suspend Mode. Hence the sensor is
placed in Sensor Suspend mode by means of (a) a Serial inter face message and (b) the SUSPEND
pin being asserted.
2 Where the external hardware does not permit the sensor SUSPEND pin to be asserted (during
Standby Mode/PC Suspend Mode, the sensor is placed in Sensor Suspend mode by means of a
Serial interface message only. This increases current consumption due to a pull-up on the
SUSPEND pin. This only applies to VV6500.
Colour Image Format 352 x 288 pixels (CIF)
Pixel Size 7.5 x 6.9 µm
Image array size 2.67mm x 2.04mm
Array Form at CIF
Sens or signal / Nois e ratio Approx . 57dB
Pack age type 36LCC (VV 6410) TBD (VV6411)
Supply Vol t age 3.3V DC +/-5%
Operating Temp. range 0oC - 40oC
Current consumption Min. Typ Max. Units
’Snapshot’/self-ti m er/contin uous/tethe red video
modes of op eration 25 40 mA
Stand-by Mode/PC Suspend Mode <70 100 µA
Table 15 : VV6410/64 11 specifications
Col our Image Format 640 x 480 pixels (V GA)
Pixel Size 7.5 x 7.5µm
Image array size 4.89mm x 3.66mm
Array Format VGA
Sensor sig nal / Noise ratio Approx. 57dB
Supply Voltage 3.3V DC +/-5%
Package type 48LCC
Operating Temp. range 0oC - 40oC
Current consumption Min. Typ Max Units
’Snapshot’/self-tim er/cont i nuous / tethered video
modes of operation 30 50 mA
Standby Mode/PC Su spend Mode, SUSPEND
pin a sserted (see Note 1)<100 150 µA
Standby Mode/PC Su spend Mode, SUSPEND
pin not asserted (see Note 2)<200 200 µA
Table 16 : VV6500 specifications
Version 3.4 33/63
STV0680B + VV6444/6410/6500 Detailed chipset specifications
6.5 Typical current consumption of complete camera
The following data assumes that the camera has been built according to reference design referred
to in Chapter 6 Figures are approximate and depend on actual components sources - see notes.
6.5.1 Using VV6444 (sensor operates at @ 5V DC)
Note: 1 See Table 10 fin Section 6.2
2 From limited evaluation, typical self-refresh current figures of certain SDRAM chips are well below
manufacturers’ maximum specification, e.g. 100-250µA. See Section 4 for recommendations.
3 This is assuming a low quiescent current 3v3 VReg is used, and assuming that the sensor is
switched off using external circuitry.
Mode Typical Current Cons. Comments
’Snapshot’/Continuous/Self
timer mode (w hi l e un-tet h-
ered) 80mA
’Snapshot’/Continuous/Self
timer mode (while tethered
to PC) 80mA Assuming appropriate hardwa re included, power is sourced
from PC while USB connected.
Camera stand-by mode
(whe n NO T co nnected to
USB)
Approx. 220µA + SDR A M
self -refresh current (see
Note 2)
Total current in this mode equals:
STV0680/6 80A Standby current con sumption (see Note 1)
+ SDRAM self-refresh current (see Note 2)
+ per i pheral c i rcuitry (appro x. 50 µA, see Note 3).
Susp end mode
(when connected to USB)
Approx. 80µA + SDRAM
self -refresh current (see
Note 2)
Total current in this mode equals:
STV0680/6 80A Standby current con sumption (see Note 1)
+ SDRAM self-refresh current (see Note 2)
+ per i pheral c i rcuitry (appro x. 50 µA, see Note 3).
+ 200 µA, based on 1.5k pull-up in camera (see Section 4)
and 15k pull-down in PC.
Table 17 : Current consumption, complete STV0680B+VV6444 camera
Detailed chipset specifications STV0680B + VV6444/6410/6500
34/63 Version 3.4
6.5.2 Using VV6410/6411/6500 (sensor operates at @ 3.3V DC)
Note: 1 See Table 10 fin Section 6.2.
2 From limited evaluation, typical self-refresh current figures of certain SDRAM chips are well below
manufacturers’ maximum specification, e.g. 100-250µA. See Section 4 for recommendations.
3 Sensor suspend mode current <10 0µA (nee ds SUSPEND pin asserte d with VV65 00), see Table 15
and Table 16.
4 If the appropriate hardware to assert the sensor SUSPEND pin is not fitted, an additional current
consumption in Standby/PC Suspend mode of Approx. 50µA can be expected with VV6500.
5 Option included in reference design to save current consumption, which can increase battery life
and increase chances of meeting USB suspend mode compliance requirements.
Mode Typical Comments
’Snapshot’/Continuous/
Self timer mode
(while un-tethered)
60mA Assuming appropriate hardware included, power is sourced
from PC while USB connected.
’Snapshot’/Continuous/
Self timer mode
(while tether ed to PC)
60mA
While playi n g back audio
soun ds through speaker 90mA Assuming 8Ω speaker as ex pl ained in application note
AN1310
Standby Mode (when NOT
connected to USB):
Sensor SUSPEND pin
asserted (see Note 4)
Approx. 220µA + SDRAM
self-refresh current
(see Note 2) + sensor
suspend mode current
(see Note 3)
Total current in this mode equals :
STV0680B Standby current consumption (see Note 1)
+ SDRAM self-refresh curren t (see Note 2)
+ peripheral circuitry (approx. 50µA).
+ Sensor suspend mode current (See Note 3)
PC Su spend mode
(when connected to USB):
Sensor SUSPEND pin
asserted (see Note 4)
Approx. 50µA + SDRAM
self-refresh current
(see Note 2) + sensor
suspend mode current
(see Note 3)
Total current in this mode equals :
STV0680B Standby current consumption (see Note 1)
+SDRAM self-refresh current (see Note 2)
+ peripheral circuitry (approx. 50µA).
+ 200µA, based on 1.5k pull-up in camera (see Chapter 6)
and 15k pull-down in P C.
+ Sensor suspend mode current (See Note 3)
Standby Mode (when NOT
connected to USB): sensor
powered off using FET
(see Note 5)
Approx. 220µA + SDRAM
self-refresh current
(see Note 2)
Total current in this mode equals :
STV0680B Standby current consumption (see Note 1)
+ SDRAM self-refresh curren t (see Note 2)
+ peripheral circuitry (approx. 50µA).
PC Su spend mode (when
connected to USB): sensor
powered off using FET
(see Note 5)
Approx. 100µA + SDRAM
self-refresh current
(see Note 2)
Total current in this mode equals :
STV0680B Standby current consumption (see Note 1)
+SDRAM self-refresh current (see Note 2)
+ peripheral circuitry (approx. 50µA).
Table 18 : Current consumption, complete STV0680B+VV6410/6411/6500 camera
Version 3.4 35/63
STV0680B+ VV6410/6411/6500 STV0680 Camera System Defect Specification
7 STV0680 Camera System Defect Specification
Note: The information in this chapter is subject to change without notice. Contact ST for precise details
and information on correct driver versions.
7.1 General
ST CMOS Sensors can contain defects as part of their standard sales specification. The sensor
defect specification, if required, can be found in the appropriate sensor datasheet, however this
specification is not the same as the camera system defect specification.
When an ST CMOS Sensor is used in a STV0680B camer a system, a de fect correction algor ithm in
the camera system will correct the sensor defects so that in the vast majority of cases the user
should not see defects in the final colour image generated by the PC/Mac driver. This chapter
clarifies the defect specification for the overall camera system.
7.2 Defect specification
When using the specified Camera System, under the specified Test Conditions:
1 No Major Visible defects are allo wed in the Final Colour Image from a CIF camera (VV6410/
6411/6444) or VGA Camera (using VV6500 shipped by S T until end of Q1 2001), except under
certain limitations given in Section 7.2.1 and Section 7.3.7.
2 No Major Visible defects are allowed in the "Inn er ar ea" (within the central 242 x 322 pixels) of
the Final Colour Image from a VGA camera (VV6500 shipped by ST after start of Q2 2001),
except under certain limitations given in Section 7.2.1 and Section 7.3.7.
3 Some Minor Visible defects are allowed in the "Outer area" (outside the central 242 x 322
pixels) of the F inal Col our Ima ge fr om a VGA camer a (VV6500 shipp ed by ST after start of Q2
2001), but no Major Visible Defects are allowed in the "Outer area", except under certain
limitations given in Section 7.2.1 and Section 7.3.7.
7.2.1 Appearance of defects under other conditions
During normal camera use ( e.g. lensed camera used in a “r eal situati on”), it is possible that defects
may be visible under certain conditions:
●At the sharp edge of certain light/dark transitions
7.3 Definition of the "Camera System"
All of the following conditions must be met for the defect spec ification to be applicable to the
"Camera System".
Note that the EVK units STV-DCA/CIF-E01 or -E04 and STV-VGA/VGA-E01 or -E04 both conform
to these conditions, hence have the same defect specification as detailed in Section 7.2.
7.3.1 CMOS Imaging Sensor
The defect specification applies to the Camera System if any of the following sensors are used.
●VV6444-C001
●VV6410-C036
●VV6411-C036
STV0680 Camera System Defect Specification STV0680B+ VV6410/6411/6500
36/63 Version 3.4
●VV6500-C001
7.3.2 Companion ASIC
The defect specific ation applies to the Camer a System, if any of the followi ng companion ASICs a re
used, subject to the firmware notes shown in Section 7.3.3:
●STV0680
●STV0680A
●STV0680B
7.3.3 Companion ASIC Firmware:
Only standard fi rmware sol d by ST is cove red by this defect specificat ion. Any OEM modificati on of
companion ASIC firmware through the STV0680 FDK means that this defect spec does not apply.
Devices containing standard firmware are sold under the following order codes:
●STV0680-001
●STV0680A-002
●STV0680B-001
●STV0680B-003
7.3.4 Camera Hardware
Camera built according to the ST Imaging Division Reference Design, including any of the options
shown.
7.3.5 Host Interface
USB or RS232 interfaces can be used.
7.3.6 Host Operating System
●PC running Windows 98, Windows 2k, Windows ME, or Mac running Mac OS 8.6 or above.
●PC Drivers with VV6444/6410 and VV6500 until end Q1 2001: Version 1.00 or above.
●PC Drivers with all sensors, including VV6500 shipped after start of Q2 2001: Version 1.14 or
above.
7.3.7 PC Software:
●Standard TWAIN Interface (PC) or Photoshop compatible plug-in (Mac)
●LCDCdemo.exe (see note 1), AVICreator.exe, or other OEM application generated through
SDK (see note 1).
●Any VfW Application (see note 2) on PC or Quicktime application on Mac.
Notes on non-default software settings:
Note: 1 With the "Greyscale" checkbox enabled in LCDCdemo.exe, uploading a full resolution image by
double clicking on the i mage thumbnail will produce a r aw “Bayer” image which can include defects.
The "Greyscale" facility is intended for OEM debug purposes only, and cannot be regarded as a
“final colour image”.
2 W hen running any VfW application, the Source->Advanced->Anti-Speckle function can be used to
enable/disable defect correction and select the correct method of defect correction in the final
colour image. Hence it is possible to see defects when the "Anti Speckle" checkbox is cleared, or
when the anti-speckle filter does not match the sensor type.
Version 3.4 37/63
STV0680B+ VV6410/6411/6500 STV0680 Camera System Defect Specification
●Sensors VV6410/6411/6444 and VV6500 shipped before end Q1 2001 require Anti-speckle 1
●Sensors VV6500 shipped after start Q2 2001 require Anti-speckle 2
7.4 Definition of the "Test Conditions"
7.4.1 Optics
●No Lens or IR filter
●No dirt on s ensor glass
7.4.2 Illumination and uniformity of scene
No lens shoul d be used. The intensity of required illumination a nd the uniform ity of the scene can be
defined thus. A defect-free im age shoul d give a luminosi ty histogram me (8 bi ts reso lut ion ) wi th the
following statistics:
1 Mean: (45% of fu ll scal e) < Mean < (6 5% of ful l scale) . Id eal l umi nosit y (mi d g rey) = 5 0-60 % of
full scale.
2 Standard Deviation: Standard Deviation < 10.
7.5 Defini tion of a "Major Visible De fect"
Anything which is visible with the naked eye under the conditions des cribed, is worthy of further
investigation. For example:
STV0680 Camera System Defect Specification STV0680B+ VV6410/6411/6500
38/63 Version 3.4
Figure 7 : No “Visible” defects
Figure 8 : Histogram of No “Visible” defects; Mean = 139; Minimum = 90
Defect
Version 3.4 39/63
STV0680B+ VV6410/6411/6500 STV0680 Camera System Defect Specification
Figure 9 : “Visible” defect
Figure 10 : Histogram of image with “Visible” defect; Mean = 145; Minimum = 0
7.6 Definition of the "Final Colour Image"
This means the Bitmap (.bmp) image displayed by the PC software as described in Section 7.3.7.
7.7 Definition of a “Minor Visible Defect”
Please refer to sensor datasheet.
Minimum
STV0680B pinout information and package dimensions STV0680B+ VV6410/6411/6500
40/63 Version 3.4
8 STV0680B pinout information and package dimensions
8.1 STV0680B pinout
Pin no. Signal Type Description Drive
Sensor Interface
69 SENSPWR Output, active
high Power-u p Sensor 2mA
(SL)
68 SENSRST Output, active low Reset Sensor 2mA
(SL)
60 SCL Input/Output
(OD,T) Sensor serial in terface 4mA
(SL)
61 SDA Input/Output
(OD,T) Sensor serial interface 4mA
(SL)
62 SD3 Input (S ,T) Sensor data
63 SD2 Input (S ,T) Sensor data
64 SD1 Input (S ,T) Sensor data
65 SD0 Input (S ,T) Sensor data
66 QCL K Input (S ,T) Qualification clock fro m senso r
67 SCLK O Output Cloc k output to sensor 4mA
GPIO (see notes)
77 GPIO0
(MODE)Debounced input Push button (Wake-up/Mode) 8mA
(SL)
76 GPIO1
(SHUTTER)Debounced input Push button (Shutter/Confirm) 8mA
(SL)
75 GPIO2
(FL-EN) IO (OD) Flash enable inp ut (Note 3)8mA
(SL)
74 GPIO3 (50/60) Debounced i nput Link to select between 50Hz and 60Hz lig hting 8mA
(SL)
73 GPIO4
(AUD-COMP) IO (OD) Audio comparator input (Note 3)8mA
(SL)
72 GPIO5 Output (OD) LED indicator 8mA
(SL)
71 GPIO6
(AMP-EN) IO (OD) A udio Amp enable (Note 3)8mA
(SL)
70 GPIO7
(FL-TRIG)IO (OD) Flash trigger (Active Low) (Note 3)8mA
(SL)
Table 19 : STV0680B Pin listing
Version 3.4 41/63
STV0680B+ VV6410/6411/6500 STV0680B pinout information and package dimensions
USB Interface
42 USBDETECT Input (S) Detect Power source from USB.
(For cam era with RS232 only, this pi n shoul d be tied
to GND)
USB
specific
ation
V1.1
complia
nt I/O
43 DATA+ Input/Output
USB bus
(For cam era with RS232 only, this pi n shoul d be
connected to test points to allow for US B production
test (lens focussing))
44 DATA- Input/Output
USB bus.
(For cam era with RS232 only, this pi n shoul d be
connected to test points to allow for US B production
test (lens focussing))
RS232 Interfac e
58 TXD Output Serial data transmit
(For camera with USB only, this pin should be tied to
RXD) 4mA
(SL)
59 RXD Input (S) Serial data receive
(For camera with USB only, this pin should be tied to
TXD)
STV0680B Master Clocks and Reset
48 XI N Input Quartz Crystal IN
49 XOUT Output Qu artz Crysta l OUT
51 RESET Input (S) Active (LOW) STV0680B reset
System Memory (SDRAM) Interface
20 DQMU Output Data input/output mask for dram_DQ[15:8] 2mA
(SL)
22 DCLK Output Clock: all S DRAM input signals ar e sampl ed on the
positive edge 4mA
24 CKE Output Clock enable: activates (HIGH) and deactivates
(LOW) the SDRAM CLK signal 2mA
(SL)
28 AD11 Output SDRAM addr ess A 11 for 64 M SDRAM or B A f or 16 M
SDRAM 2mA
(SL)
31 AD9 Output SDRAM address A9 2mA
(SL)
33 AD8 Output SDRAM address A8 2mA
(SL)
35 AD7 Output SDRAM address A7 2mA
(SL)
37 AD6 Output SDRAM address A6 2mA
(SL)
39 AD5 Output SDRAM address A5 2mA
(SL)
Pin no. Signal Type Description Drive
Table 19 : STV0680B Pin listing
STV0680B pinout information and package dimensions STV0680B+ VV6410/6411/6500
42/63 Version 3.4
41 AD4 Output SDRAM address A4 2mA
(SL)
40 AD3 Output SDRAM address A3 2mA
(SL)
38 AD2 Output SDRAM address A2 2mA
(SL)
36 AD1 Output SDRAM address A1 2mA
(SL)
34 AD0 Output SDRAM address A0 2mA
(SL)
32 AD10 Outp ut SDRAM address A10 2mA
(SL)
26 AD12 Output SDRAM addre ss A1 2, BA0 for 64M SD RAM, unus ed
on 16M 2mA
(SL)
30 AD13 Output SDRAM addre ss A1 3, BA1 for 64M SD RAM, unus ed
on 16M 2mA
(SL)
25 CS Output, active l ow Chip select: enables (registered LO W) and dis ables
(registered HIGH) the SDRAM command decoder. 2mA
(SL)
23 RAS Output, active low SDRAM row address strobe command 2mA
(SL)
21 CAS Output, active low SDRA M column address strobe command 2mA
(SL)
19 WE Output, active low SDRAM write enable com m an d 2mA
(SL)
18 DQML Outp ut Da t a i np ut/output ma sk for dra m _DQ[7:0] 2mA
(SL)
16 DQ7 Input/Output SDRAM Data Bus 2mA
(SL)
14 DQ6 Input/Output SDRAM Data Bus 2mA
(SL)
12 DQ5 Input/Output SDRAM Data Bus 2mA
(SL)
10 DQ4 Input/Output SDRAM Data Bus 2mA
(SL)
8 DQ3 Input/O utp ut SDRAM Data Bus 2mA
(SL)
6 DQ2 Input/O utp ut SDRAM Data Bus 2mA
(SL)
4 DQ1 Input/O utp ut SDRAM Data Bus 2mA
(SL)
Pin no. Signal Type Description Drive
Table 19 : STV0680B Pin listing
Version 3.4 43/63
STV0680B+ VV6410/6411/6500 STV0680B pinout information and package dimensions
100 DQ0 Input/Output SDRAM Data Bus 2mA
(SL)
2 DQ15 Input/Output SDR AM Data B us 2mA
(SL)
5 DQ14 Input/Output SDR AM Data B us 2mA
(SL)
7 DQ13 Input/Output SDR AM Data B us 2mA
(SL)
9 DQ12 Input/Output SDR AM Data B us 2mA
(SL)
11 DQ11 Input/Output SDRAM Data Bus 2mA
(SL)
13 DQ10 Input/Output SDRAM Data bus 2mA
(SL)
15 DQ 9 Input/Output SDRAM Data bus 2mA
(SL)
17 DQ 8 Input/Output SDRAM Data bus 2mA
(SL)
LCD Interface
85 LCDCOM O utput LCD Commo n 2mA
(SL)
93 LCD1_6 Output LCD digit 1 segmen t G 2mA
(SL)
94 LCD1_5 Output LCD digit 1 segmen t F 2mA
(SL)
95 LCD1_4 Output LCD digit 1 segmen t E 2mA
(SL)
96 LCD1_3 Output LCD digit 1 segmen t D 2mA
(SL)
97 LCD1_2 Output LCD digit 1 segmen t C 2mA
(SL)
98 LCD1_1 Output LCD digit 1 segmen t B 2mA
(SL)
99 LCD1_0 Output LCD digit 1 segmen t A 2mA
(SL)
86 LCD2_6 Output LCD digit 2 segmen t G 2mA
(SL)
87 LCD2_5 Output LCD digit 2 segmen t F 2mA
(SL)
88 LCD2_4 Output LCD digit 2segme nt E 2mA
(SL)
89 LCD2_3 Output LCD digit 2segme nt D 2mA
(SL)
Pin no. Signal Type Description Drive
Table 19 : STV0680B Pin listing
STV0680B pinout information and package dimensions STV0680B+ VV6410/6411/6500
44/63 Version 3.4
90 LCD2_2 Output LCD digit 2segment C 2mA
(SL)
91 LCD2_1 Output LCD digit 2 segment B 2mA
(SL)
92 LCD2_0 Output LCD digit 2 segment A 2mA
(SL)
Piezo Interface
84 PIEZ O Output Di rect connection to piezo buzzer 8mA
(SL)
Battery Level Comparator Interface
80 LO_BAT Input (A) Battery le vel comparator input. The vol tage on
rowboat is compared to the reference to determine
the battery status
79 LO_BAT_REF Input (A) 1.22V battery level com parator reference input
Power and Ground
1, 27, 50 ,
56, 78 DVSS[1-5] Power pin Digital Ground
3, 29, 57 ,
83 DVDD[1-4] Power pin Digital Power
52 PLLGVDD Power pin PLL Guard Power
53 PLLGVSS Power pin PLL Guard Ground
54 PLLAV DD Powe r pi n PL L Analogue Power
55 PLLAV SS Power pin PL L Analog ue Groun d
Non-user pins
45 TEST0 Input Non-user pin - connect to 3V3
46 TEST1 Input Non-user pin - connect to 3V3
47 TEST2 Input Non-user pin - connect to 3V3
Audio DAC
81 DACRES I(A) DAC bias amplifie r reference input. See Note 2.
82 DACOUT O (A) 8-bit DAC current source output. See Note 2. 0-10mA
Pin no. Signal Type Description Drive
Table 19 : STV0680B Pin listing
Version 3.4 45/63
STV0680B+ VV6410/6411/6500 STV0680B pinout information and package dimensions
Note: 1 GPIO are not ‘general purpose’, in the sense that their function is predetermined (e.g. GPIO0 =
MODE, G PIO2 is Unused), dependant on the STV0680B firmware.
2 Audio implementation is shown in an Applications Note available from ST.
3 Only with STV0680B-003. With STV0680B-001, tie low.
4 GPIO2, 4, 6, 7 MUST be tied low with STV0680B-003 where no Audio/Flashgun functionality is
required.
Key
SL sl ew rate l i mited output
OD open drain output
S Schmidt input
A Analogue i nput/output
T 5V tolera nt pad (these pads do not hav e di ode protection)
STV0680B pinout information and package dimensions STV0680B+ VV6410/6411/6500
46/63 Version 3.4
8.2 STV0680B pin description
Figure 11 : STV0680B pinout in 100QFP package
GPIO2 (FL-EN)
GPIO 3 (50/60)
GPIO4 (AUD-COMP)
GPIO 5 (LED)
GPIO6 (AMP_EN)
GPIO7 (FL-TRIG)
SENSPWR
SENSRST
SCLKO
QCLK
SD0
SD1
SD2
SD3
SDA
SCL
RXD
TXD
DVDD3
DVSS4
PLLAVSS
PLLAVDD
PLLGVSS
PLLGVDD
RESET
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
STV0680B
DVSS1
DQ15
DVDD1
DQ1
DQ14
DQ2
DQ13
DQ3
DQ12
DQ4
DQ11
DQ5
DQ10
DQ6
DQ9
DQ7
DQ8
DQML
WE
DQMU
CAS
DCLK
RAS
CKE
CS
AD12
DVSS2
AD11
DVDD2
AD13
AD9
AD10
AD8
AD0
AD7
AD1
AD6
AD2
AD5
AD3
AD4
USBDETECT
DATA+
DATA-
TEST0
TEST1
TEST2
XIN
XOUT
DVSS3
100QFP
LO_BAT
LO_BAT_REF
DVSS5
GPIO 0 (MOD E)
GPIO1 (SH U TTER)
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
DQ0
LCD1_a
LCD1_b
LCD1_c
LCD1_d
LCD1_e
LCD1_f
LCD1_g
LCD2_a
LCD2_b
LCD2_c
LCD2_d
LCD2_e
LCD2_f
LCD2_g
LCDCOM
PIEZO
DVDD4
DACOUT
DACRES
Version 3.4 47/63
STV0680B+ VV6410/6411/6500 STV0680B pinout information and package dimensions
8.3 STV0680B package dimensions
Note: Pin pitch is 0.65mm
VV6410/6411 pinout information and package dimensions STV0680B + VV6410/6411/6500
48/63 Version 3.4
9 VV6410/6411 pinout information and package
dimensions
9.1 VV6410/6411 pinout
Figure 12 : 36 pin LCC package pin assignment
RESETB
D[0]
LST/D[5]
FST/D[6]
VDDcore/
Vbus
VBG
NC
AoutP
VDDhi
OEB
CLKI
7
8
6
54321
9
10
11
12
13
14
1516171920212223
24
25
26
27
28
29
32 33 34 35 36
D[3]
D[4]
Aud3V3
AoutN
Vbase
AVSS
18
30
31 NC
D[1]
Vid3V3
AIN
VSScore
VSSio
SRAMVSS
D[2]
QCK
SDA
SUSPEND
VDDio
D[7]
NC
Reg3V3
SCL
PORB
VV6410/6411
36LCC
NC
NC
Version 3.4 49/63
STV0680B + VV6410/6411/6500 VV6410/6411 pinout information and package dimensions
9.2 VV6410/6411 pin description
Name Pin Number Type Description
Power supplies
AVSS 1 0 GND Core an alogue ground and reference sup pl i es.
SRAMVS S 17 G ND In-col umn SRAM analo gue ground.
VDDcore/
Reg3V3 34 PW R Digital logic power.
VDDio 33 PWR Digital pad ri ng power.
VSScore 22 GND Digital logic ground.
VSSio 23 GND Dig ita l pad ring ground.
Analogue signals
VBG 1 OA Internally generated ban dgap referen c e vo l t ag e 1. 2 2V
AIN 4 IA A nalogue i nput to Audi o Amplifier
AOut P 5 OA Analogue output of Audio A m plifier (positi ve)
AOut N 6 OA Analogue output of Audio A m plifier (negati ve)
VDDHI 9 IA Incoming power su pply 4 -> 6V
VBa se 35 OA Driv e for base of exte rnal bipol ar
Vbus 36 IA Incoming power supply 3.3 -> 6V
Aud3V3 3 OA On-chip Audio Amplifier Voltage Regulator Output
Vid3V3 11 OA On-chip Video Supply Voltage Regulator Output
PORB 1 3 OD P ower-on Reset ( Bar) Outp ut .
Digital video interface
D[4]
D[3]
D[2]
D[1]
D[0]
27
26
25
24
20
ODT Tri-state able 5-wire output data bus.
- D[4] is the most significant bit.
- D[4: 0] have programmable drive stren gths 2, 4 a nd 6 mA
QCK 32 ODT Tri-stateable data qualification clock.
LST/D[5] 28 ODT Tri-stateable Line start output
May be configured as tri -stateable ou tput data bit 5 D[5 ].
FST/D[6] 29 ODT Tri-stateable Frame start signal.
May be configured as tri -stateable ou tput data bit 6 D[6 ].
D[7] 31 ODT Tri-s tat ea ble Data wire (ms data bit).
May be configured as tri -stateable ou tput data bit 6 D[6 ].
OEB 16 ID↓Digital output (tri-state) enable.
Table 20 : VV6410 pin description
VV6410/6411 pinout information and package dimensions STV0680B + VV6410/6411/6500
50/63 Version 3.4
Note: 1 Early VV6410/6411 pre-production samples were 48LCC, however the sampling and production
package is 36LCC.
Digital control signals
RESETB 21 ID↑System Reset. Active Low.
May be configured as System Sync. Active Low.
SUSPEND 12 ID↑USB Suspend Mode Control signal. Active High
If this featu re is not required then the sup port circ uit must pull th e p in to
ground. The combinat i on of an act i ve high si gnal and pull up pad was
chosen to limit current drawn by the device while in suspend mode.
Serial interface
SCL 15 BI↑Serial bus clock (input only).
SDA 14 BI↑Serial bus data (bidirectional, open drain).
System clocks
CLKI 30 ID↓Sc hm itt Buffe red Cloc k input or LVDS positiv e Clock input
Not connected
NC 2, 7, 8, 18, 19 Not connected
Key
A Analo gue Input D Digital Input
OA Analogue Output ID↑Digital input with internal pull-up
BI Bidirectional ID↓Digital input with internal pull-do w n
BI↑Bidirectional with internal pull-up OD Digital Output
BI↓Bidirectional with internal pull-down O D T Tri-stateable Digital Output
Name Pin Number Type Description
Table 20 : VV6410 pin description
Version 3.4 51/63
STV0680B + VV6410/6411/6500 VV6410/6411 pinout information and package dimensions
9.3 VV641 0/6411 package dimensions
(36pin LCC).
Figure 13 : VV6410/6411 36LCC Package Detail
Note: 1 Die is optically centred
2 Refractive Index of Glass is approx. 1.52
3.93 7 RE F.
TYP.
Pin n°1
(CO.2)
Typ.
(0.2)
24
32
23 0.178 Max.
B/F Pull Back
33
30
1
5
6
14
15
0.7366
Typ.
10.66 8 S Q.-0.13
+0.2
8.636 S Q. ±0.13
7.366 SQ. ±0.13
A0.08 0.08
-A-
1.549 ±0.16
0.571±0.05
0.546 ±0.05
0.55 ±0. 05 0.432 ±0.05
VV6410/6411 pinout information and package dimensions STV0680B + VV6410/6411/6500
52/63 Version 3.4
.
Figure 14 : VV6410/6411 36LCC Package Detail
Note: 1 Die is optically centred
2 Refractive Index of Glass is approx. 1.52
R 0.15 REF
36 PLCS
R 0.15 REF.
4 CORNERS
14
15
23
24
32
33 36 16
1.016 typ.
8.128 ±0.13
0.889 REF.
TYP.
0.508
Typ.
Pin n°1
INDEX
0.508 REF
TYP.
Version 3.4 53/63
STV0680B+ VV6410/6411/6500 VV6500 pinout information and package dimensions
10 VV6500 pinout information and package dimensions
10.1 VV6500 pinout
Figure 15 : 48 pin LCC package pin assignment
RESET
D[1]
D[2]
D[3]
D[4]
NC
VBASE
VBUS
VBG
NC
VDDHI
NC
NC
OE
SUSPEND
7
8
6
543214847464544
42
41
38
9
10
11
12
13
14
15
16
17
1920212223242526272829
32
33
34
35
36
37
LST/D[5]
FST/D[6]
CLKI/CLKIP
D[7]
QCK
AUD3V3
AOUTP
VDDCORE/REG3V3
40
39
18
30
31
43
NC
D[0]
AOUTN
SDA
POR
VID3V3
AVSS
AIN
VSSCORE
VSSIO
SCL
VDDIO
NC
NC
NC
NC
NC
NC
NC
SRAMVSS
NC
NC
NC
CLKIN
NC
VV6500
48LCC
VV6500 pinout information and package dimensions STV0680B+ VV6410/6411/6500
54/63 Version 3.4
10.2 VV6500 pin description
Name Pin Number Type Description
Power supplies
AVSS 11 GND Core analogue ground and reference supplies.
SRAM VSS 21 GND In-column SRA M analogue ground.
VDDio 43 PWR Digital pad ring power.
VSScore 29 GND Digital lo gic ground.
VSSio 30 GND Digital pad ring ground.
SRAM VSS 21 GND In-column SRA M analogue ground.
Analogue signals
VBG 1 OA Inte rnally generated bandgap reference voltag e 1. 22V
AIN 4 IA Analogue input to Audio Amplifier
AOutP 5 OA Analogue output of Audio Amplifier (positive)
AOutN 6 OA Analogue output of Audio Amplifier (negative)
VDDHI 9 IA Incoming power supply 4 -> 6V
VBase 46 OA Drive for base of external bi polar
Vbus 47 IA Incoming power supply 3. 3 -> 6V
VDDCORE/
REG3V3 45 OA On-chip Voltage Regul at or Output
ARef IA On-chip Audio Amplifier Reference Input
Aud3V3 3 OA On-chip Audio Amplifier Voltage Regulator Output
Vid3V3 12 OA On-chip Video Supp l y Voltage Re gulator Output
PORB 16 OA Power-on Reset (Bar ) Output.
Table 21 : VV6500 pin description
Version 3.4 55/63
STV0680B+ VV6410/6411/6500 VV6500 pinout information and package dimensions
Digital video interface
D[4]
D[3]
D[2]
D[1]
D[0]
36
35
34
33
32
ODT Tri-state able 5-wire output data bus.
- D[4] is the most significant bit.
- D[4: 0] have programmable drive stren gths 2, 4 a nd 6 mA
QCK 42 ODT Tri-stateable data qualification clock.
CLKIN 40 BI↑LVDS negati ve Clock i n put
LST/D[5] 37 ODT Tri-stateable Line start output
May be configured as tri -stateable ou tput data bit 5 D[5 ].
FST/D[6] 38 ODT Tri-stateable Frame start signal.
May be configured as tri -stateable ou tput data bit 6 D[6 ].
D[7] 41 ODT Tri-s tat ea ble Data wire (ms data bit).
May be configured as tri -stateable ou tput data bit 6 D[6 ].
OEB 20 ID↓Digital output (tri-state) enable.
Digital control signals
RESETB 31 ID↑System Reset. Active Low.
May be configured as System Sync. Active Low.
SUSPEND 31 ID↑USB Suspend Mode Control signal. Active High
If this featu re is not required then the sup port circ uit must pull th e p in to
ground. The combinat i on of an act i ve high si gnal and pull up pad was
chosen to limit current drawn by the device while in suspend mode.
Serial interface
SCL 18 BI↑Serial bus clock (input only).
SDA 17 BI↑Serial bus data (bidirectional, open drain).
System clocks
CLKI/CLKIP 39 ID↓Schmi t t Buffere d Clock input or LVDS posi tive C l ock input
Not connected
NC 2, 7, 8, 10,13,
14, 19, 22-28,
48
Not connected
Key
A Analo gue Input D Digital Input
OA Analogue Output ID↑Digital input with internal pull-up
BI Bidirectional ID↓Digital input with internal pull-do w n
BI↑Bidirectional with internal pull-up OD Digital Output
BI↓Bidirectional with internal pull-down O D T Tri-stateable Digital Output
Name Pin Number Type Description
Table 21 : VV6500 pin description
VV6500 pinout information and package dimensions STV0680B+ VV6410/6411/6500
56/63 Version 3.4
10.3 VV6500 package dimensions
(48 pin LCC)
Figure 16 : VV6500 Package details
14.22 S Q.+0.30
-0.13
11.414 ±0.13
9.89 ±0.13
0.33 min.
B/F EXPOSURE
12.014 ±0.13
10.490 ±0.13
0.13 Typ.
B/Fpull back
5.20 Ref.
Typ.
0.48
typ.
0.20
typ.
0.50
0.20 ref. x 45°
Pin n°1
1
16
6
7
18
19
19
30
30
31
31
42
42
0.0217±0.002
(0.5 5 ±0.05)
MP-2
MP-3
0.571±0.050
0.546 ±0.050
1.549 ±0.16
0.43 2 ±0.050
0.08
0.08A-A-
0.20
Typ.
43 48
43 48
Version 3.4 57/63
STV0680B+ VV6410/6411/6500 VV6500 pinout information and package dimensions
Figure 17 : VV6500 Package details
Note: 1 Die is optically centred
2 Refractive Index of Glass is approx. 1.52
11 .176 ±0.13
Typ.
11.016 ±0.08
typ.
19
18
7
R0.15 REF.
4 CO RNERS R0.15 REF.
48 PLC S
648 43
31
30
1.02 ±0 .18
Typ.
1.52 +0.25
-0.13
Typ.
Pin n°1
Index
diam. 0.51
0.254
Schematics and example parts list STV0680B + VV6410/6411/6500
58/63 Version 3.4
11 Schematics and example parts list
11.1 Schematics
Support schematics are shown in the following documents:
●STV0680+VV6444 Reference Design Manual
●STV0680B+VV6410/6411/6500 Reference Design Manual
Both are available in the OEM section of the ST Imaging Division web site
http://www.st.com (click on “Imaging Produc ts”)
An example p arts list is shown in Section 11.2, however the above documents should be referr ed to
for the most up-to-date information.
11.2 Example parts list
The following is taken from STV0680B + VV6410/6411/6500 Ref Design Manual Rev 2.2. Audio
and Flashgun hardware are not included.
Assuming VV6410/6411 camera with power supply “option1”, 16MBit SDRAM and 6V battery, with
USB and RS232, non-populated options are shown with a grey background.
# Qty Refdes Device Package Value Notes
1 1 B1 Battery Up to 6V, or up to 9V with different
schematic
2 1 C23 CAP 805 100N
320
C2,C7, C8,
C10, C11,
C12, c13,
C14, C17 ,
C18, C24 ,
C25, C27 ,
C28, C29 ,
C30, C31 ,
C32, C33 ,
C37
CAP 805 100N
4 2 C40, C41 CAP 805 100N C40-41: option 2 only
5 2 C5, C6 CAP 805 22P
6 2 C15, C16 CAP 805 1U
7 2 C19, C26 CAP 805 220P
8 1 C22 CAP 805 220N
9 2 C34, C35 ECAP T/H 10U
10 1C38 ECAP T/H 10U C38: option 2 only
11 1 D1 1N4001 D041 1N4001 Gen. purpose if 4 x A4 or AA
batteries
12 1D1 Schottky D041 Schottky Only use Schottky if 3 x AA or AAA
batteries
13 1 D2 Diode SOT23 BAS116 Must be low leakage
14 2 D3,D4 Diode SOT23 BAS16 Only for RS232
15 3 F1, F2, F3 Ferrite 805 May be requi red for FCC
compliance
16 1 J1 USB_CON CON-USB-4 P_TYPE_B See notes. Consult USB spec for
USB compliance
Table 22 : STV0680B + VV6410/6411/6500 - Parts list
Version 3.4 59/63
STV0680B + VV6410/6411/6500 Schematics and example parts list
17 1 J2 JACK_SKT SCJ-0355- B Only for RS232
18 1 LCD1 2DIGITLC
19 1 LED1 LED 2PINTHRU Could be om i tted for reduce d
curre nt con s.
20 1 Q1 NPN SOT23 BC848
21 2 Q2, Q3 NPN SOT23 BC848
22 1 Q4 NPN SOT23
23 1 Q5 PNP SOT23 BCW61 For USB inrush pro tection
24 1 Q6 PNP SOT23 Only fo r RS 23 2
25 1 Q8 SI2301DS SOT23 For USB inrush protection
26 1 Q9 SI2301DS SOT23
27 1 Q10 SI2301DS SOT23
28 1Q12 SI2301DS SOT23 Only for option 2. Switches sensor
off in standby mode
29 1 R1 RES 805 220K
30 1R72 RES 805 220K R72 onl y req ’d for RS232 camera
with USB test p o ints
27 1 R2 RES 805 1R2 R2 for U S B inrush protect i on
28 2 R9, R55 RES 805 100K
29 1 R54 RE S 805 100K R54 : option 1 only
30 1R59 RES 805 100K R59 onl y re’qed for RS232 came ra
with USB test p o ints
31 1 R12 RE S 805 100K R12 for USB inrush protection
32 5 r10, R13,
R14, R16 ,
R23 RES 805 1M
33 1R71 RES 805 1M Onl y f o r RS 232 camera without
USB for produc ti on test
34 1 R7 RES 805 470K
35 1 R8 RES 805 82K
36 1 R11 RES 805 330K Suggested v alue for 6 V battery
36 1R11 RES 805 510K Suggested value for 4.5V battery
36 1R11 RES 805 Suggested value for 9V battery
(different schematic)
36 1R66 RES 805 0R
37 1R6 RES 805 0R Only fit if no USB inrush protection
required
38 3R37, R61 ,
R66 RES 805 0R R37, R61, R66: option 2 only
39 1R65 RES 805 0R Only for camera with no RS232
40 4 R43, R44,
R62, R63 RES 805 0R R43, R44: option 1 only
R62, R63: option 1 only
41 1 R17 RES 805 33R
42 2 R19, R20 RE S 805 24R
43 1 R22 RES 805 120K
44 5 R24, R67,
R68, R69 ,
R70 RES 805 0R R24: only fit for 60Hz flicker select
45 6 R25, R31,
R32, R33 ,
R34, R35 RES 805 10K R25: R24: only fit for 50Hz flicker
select
R31-R35: only for RS232
46 2 R28, R29 RE S 805 330K
47 1 R41 RES 805 10K
48 1 R30 RES 805 2K2
# Qty Refdes Device Package Value Notes
Table 22 : STV0680B + VV6410/6411/6500 - Parts list
Schematics and example parts list STV0680B + VV6410/6411/6500
60/63 Version 3.4
Note: Not all compatible memory chips exhibit a low enough self-refresh current to meet the target
current for USB suspend mode (see Table 17). Two memory types have been suggested in Table
18, based on limited evaluati on by ST, however this does not constitute a full characterisatio n, and
no guarantees can be made that the self-refresh current consumption will match the target for USB
suspend mode in all cases. Please consult the memory manufacturer
49 1 R21 RES 805 1K5
50 1R64 RES 805 1K5 Only f o r R S232 camera without
USB for produc ti on test
51 1 R36 RE S 805 680R Value depends on LED1 type
52 2 R39, R40 RE S 805 4K7
53 1 R50 RES 805 390R
54 1 SW1 TOGGLE_S SWITCH Optional battery off switch when not
in use (would los e store im ages)
55 2 SW2, SW3 PUSH_SWI TC FARNEL 58 Push button switches
56 1SW4 TOGGLE_S SWITCH Only required for user selection of
flicker frequency (see alternate
sche mat i c and ex pl a natory notes )
57 1 T1 PIEZO FARNELL_9 26
58 6TP1, TP2,
TP3, TP4,
TP5, TP6 TESTPOINT TP Only required for RS23 2 c am e ra
with US B production Test (le ns
focusing )
59 1U2 VV6500 48LCC VGA sensor (different footprint to
VV6410)
60 1 U3 STV0680B 100QFP Only require U2 or U6
STV0680 or STV0680A also
suitable
61 1 U4 GM72V661 64 400MIL _OP SDRAM dual footprint is possible for
U4 and U5
62 1 U5 GM72V161 62 400MIL _OP
Preferred SDRAM has lo w self
refresh Idd. e.g. (16Mbit)
LG semicon: GM72V16162ET75
Hyundai: HY57V161610DTC-7
Micro n: M T48LC1M 16A1TG S
Samsung: KM416S11200T-G10
63 1 U6 VV6410 36LCC CIF se nso r (different footpr i nt to
VV6500) only require U2 or U6
64 1U8 Power-on-
rese t chip SOT23 2.7-2.93V
U8 only for option 2
e.g. MAXIM MAX809SEURT
(2v93 th reshold)
TELCOM TCM809SENB
(2v93 th reshold)
DALL AS DS1233 (S OT223)
65 1U10 5VREG SOT89-5 XC62HR500
2U10 only required for 9V battery
66 1U11 3V3REG SOT89 MC78FC33H
T1 U11 only for option2
67 1 X1 XTAL HC49U 12MHz
68 1 Lens Lens wi th IR filter
Total 131
# Qty Refdes Device Package Value Notes
Table 22 : STV0680B + VV6410/6411/6500 - Parts list
Version 3.4 61/63
STV0680B + VV6410/6411/6500 Evaluation Kit and Reference design manual
12 Evaluation Kit and Reference design manual
STMicroelectronics recommends using the Evaluation Kit for initial evaluation and design-in.
Both evaluation kits (STV-DCA/CIF -E04 and STV-DCA/VGA-E04) now include audio record and
playback circuitry as well as flashgun i nterface circ uitry and a fla shgun hotshoe connector ( to allow
the OEM to use a standa rd ca mer a flashgun ), allowing the new features as w ell as the existi ng f ea-
tures to be demonstrated.
Also included are a STV0680B + CMOS sensor chipset, memory, lens, connectors, LCD, battery
holder, push buttons/switches, and other components as detailed. Optional PCB links enable alter-
nate functionali ty , and demonstra tion software is include d, allowing for tethere d video, upload to the
PC of pictures, sounds, and AVI movie clips, and download to the camera of custom sounds.
A reference design manual i s available, giving the camera desi gner everything requi red to design a
complete camera with standard features. It includes schematics, explanatory notes, parts list and
layout advice. Audio and flashgun har dware are the subject of separate applications note s, contact
ST for details.
12.1 Ordering details
Description Part number
36pin LCC, CIF CMOS sensor VV6410C036
VV6411C036
48pin LCC, VGA CMOS sensor VV6500C001
Standard features
STV0680B companion processor STV0680B-001
Evaluation Kit for STV0680B+VV6410 STV-DCA/CIF-E01
Evaluation Kit for STV0680B+VV6500 STV-DCA/VGA-E01
“Standard” + “New” features: Includ in g Aud io, Custom sounds, and Flashgun
STV0680B companion processor STV0680B-0 03
Evaluation Kit for STV0680B+VV6410 STV-DCA/CIF-E04
Evaluation Kit for STV0680B+VV6500 STV-DCA/VGA-E04
Table 23 : Ordering details for the STV0680B + VV6410/6411/6500
Evaluation Kit and Reference design manual STV0680B + VV6410/6411/6500
62/63 Version 3.4
12.2 Technical support
Technical support information, such as datasheets, software downloads,etc, for produc ts of the
STMicroelectronics Imaging Division can be found at http://www.vvl.co.uk/ or www.st.com (click
on Imaging products)
General sales/technical enquiries can be directed to regional email contacts:
asiapacific.imaging@st.com
centraleurope.imaging@st.com
france.imaging@st.com
japan.imaging@st.com
nordic.imaging@st.com
southerneurope.imaging@st.com
ukeire.imaging@st.com
usa.imaging@st.com
Version 3.4 63/63
STV0680B + VV6410/6411/6500
Information furnished is believed to be accurate and reliable. However , STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for an y infringement of patents or other right s of third parties which ma y re s ult from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST l ogo is a re gi stered trademark of ST M i croelec t ronics
© 2001 STMicroelectronics - All Ri ghts Res erved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan
Malaysia - Malta - Mor occo - Singapore - S pain - Sweden - Switzerl and - United King dom - U.S. A.
www.st.com
