PIFIA3PP44199 - JDS Uniphase - Datasheet.Directory

Product Bulletin

1480/1550 nm Polarization-

Insensitive Fiber Isolators

JDS Uniphase 1480/1550 nm Polarization-

Insensitive Fiber Isolators are specifically designed

for erbium doped fiber amplifier (EDFA)

applications. They provide stable, reverse isolation

at both 1480 and 1550 nm simultaneously. They

are insensitive to input light polarization and

epoxy-free in the optical path.

Key Features

Dual window coverage (1480 and 1550 nm)

High isolation

Low insertion loss

Epoxy-free optical path

Very low insertion loss and isolation stability

over temperature and wavelength ranges

High power handling capability

Applications

Optical fiber amplifiers

WDM network systems

Compliance

Telcordia 1221

PIFI 1480 | 2

Wavelength Dependence Temperature Dependence

Insertion Loss Isolation

Input Return Loss

Polarization Mode Dispersion

Polarization Dependent Loss

Output Return Loss

INSERTION LOSS (dB)

Isolation

Insertion Loss

WAVELENGTH (nm)

1440 1460 1580 1500 1520 1540 1560 1580 1600

ISOLATION (dB)

1.4

1.2

1.0

0.8

0.6

0.4

Isolation

Insertion Loss

INSERTION LOSS (dB)

ISOLATION (dB)

1.4

1.2

1.0

0.8

0.6

0.4

-20 0 20 40 60 80 100

TEMPERATURE (˚C)

PMD

)

PIFI 1480 | 3

Specifications

Parameter Premium Grade A

Peak isolation Typical 50 dB 45 dB

Isolation (1460 to 1580 nm, 23 °C, all states of polarization)1Minimum 45 dB 40 dB

Isolation (1460 to 1580 nm, 0 to 60 °C, all states of polarization)1Minimum 40 dB 37 dB

Insertion loss (1460 to 1580 nm, 0 to 60 °C, all states of polarization)2Typical 0.6 dB 0.8 dB

Maximum 0.9 dB 1.2 dB

Return loss (input/output)2,3 Minimum 60/50 dB 55/50 dB

Polarization dependent loss (PDL)3Maximum 0.1 dB 0.2 dB

Polarization mode dispersion (PMD)3Maximum 0.05 ps 0.1 ps

Optical power Maximum 300 mW 300 mW

Tensile load Maximum 10 N 10 N

Dimensions (D x L) 5.5 x 30 mm 5.5 x 30 mm

Operating temperature -20 to 60 °C -20 to 60 °C

Storage temperature -40 to 85 °C -40 to 85 °C

1. Isolation over 1460 to 1500 nm is 2 dB lower.

2. Without connectors.

3. Measured at 23 °C.

Package Dimensions

30 mm

5.5 mm

All information contained herein is believed to be accurate and is subject to change without notice. No responsibility is assumed for

its use. JDS Uniphase Corporation, its subsidiaries and affiliates, or manufacturer, reserve the right to make changes, without notice, to

product design, product components, and product manufacturing methods. Some specific combinations of options may not be

10113984 Rev. 001 06/01

U.S. and Canada Toll Free: 877-550-JDSU

www.jdsuniphase.com

PIFI 1480 | 4

Ordering Information

Indicate your requirements by selecting one option from each configuration table. Please print the corresponding codes in the

available boxes to form your part number. For more information on this or other products and their availability, please

contact your JDS Uniphase account manager, or call 1-877-550-JDSU toll free in the U.S. and Canada, or visit

www.jdsuniphase.com.

Sample: PIFIA3AP11100

SMF-28 is a registered trademark of Corning Incorporated.

ST and LC are registered trademarks of Lucent Technologies.

Telcordia is a trademark of Telcordia Technologies Incorporated.

1. Standard.

2. Insertion loss slightly increases.

3. Insertion loss and return loss depend on connector type.

Code Fiber Type (Input)

1 250 µm fiber (SMF-28)1

3 900 µm loose tube (SMF-28)

4 900 µm tight buffer (SMF-28)1

6 900 µm fiber (DS)2

Code Connector3

(Output)

0 No connector1

1 FC/PC

2 FC/SPC

3 FC/APC

4 SC/SPC

5 SC/APC

8ST

9 FC/UPC

A SC/UPC

B LC/PC

DMU

PIFI

Code Wavelength

A 1480/1550 nm

Code Fiber Length

1 1 meter1

2 2 meters

3 3 meters

4 0.5 meters

5 1.5 meters

6 2.5 meters

Code Model

P Premium

A Grade A1

Code Fiber Type (Output)