DATA SH EET
Product specification
Supersedes data of November 1992 1995 Sep 04
DISCRETE SEMICONDUCTORS
BFS17W
NPN 1 GHz wideband transistor
1995 Sep 04 2
NXP Semiconductors Product specification
NPN 1 GHz wideband transistor BFS17W
APPLICATIONS
Primarily intended as a mixer,
oscillator and IF amplifier in UHF and
VHF tuners.
DESCRIPTION
Silicon NPN transistor in a plastic
SOT323 (S-mini) package. The
BFS17W uses the same cry sta l as
the SOT23 version, BFS17.
PINNING
PIN DESCRIPTION
1base
2emitter
3 collector
Fig.1 SOT323
handbook, 2 columns 3
12
MBC870
Top view
Marking code: E1
QUICK REFERENCE DATA
Note
1. Ts is the temperature at the sold ering point of the collector p in.
LIMITING VALUES
In accordance with th e Absolute Maximum Ratin g System (IEC 134).
Note
1. Ts is the temperature at the sold ering point of the collector p in.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
VCBO collector-base voltage 25 V
VCEO collector-emitter vo ltage 15 V
ICDC collector current 50 mA
Ptot total power dissipation up to Ts=118C; note 1 300 mW
hFE DC current gain IC=2mA; V
CE =1V 25 90
fTtransition frequency IC=25mA; V
CE =5V 1.6 GHz
Cccollector capacitance IE=0; V
CB =10V; f=1MHz 0.8 1.5 pF
Cre feedback capacit an ce IC=1mA; V
CE =5V; f=1MHz 0.75 pF
Tjjunction temperature 175 C
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCBO collector-base voltage open emitter 25 V
VCEO collector-emitter voltage open base 15 V
VEBO emitter-base voltage open collecto r 2.5 V
ICcollector current (DC) 50 mA
Ptot total power dissipation Ts=118C; note 1 300 mW
Tstg storage temperature 65 +150 C
Tjjunction temperatur e 175 C
1995 Sep 04 3
NXP Semiconductors Product specification
NPN 1 GHz wideband transistor BFS17W
THERMAL CHARACTE RISTI CS
Note
1. Ts is the temperature at the sold ering point of the collector p in.
CHARACTERISTICS
Tj=25C (unless otherwise specified).
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth j-s thermal resistance from junction to soldering point up to Ts=118C; note 1 190 K/W
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
ICBO collector cut-off current IE=0; V
CB =10V 10 nA
hFE DC current gain IC=2mA; V
CE =1V 25 90
fTtransition frequency IC=25mA; V
CE =5V;
f=500MHz
1.6 GHz
Cccollector capacitance IE=i
e=0; V
CB =10V;
f=1MHz
0.8 1.5 pF
Ceemitter cap a citance IC=i
c=0; V
EB =0.5V;
f=1MHz
2pF
Cre feedback capacitance IB=i
b=0; V
CE =5V;
f=1MHz; T
amb =25C
0.75 pF
F noise figure IC=2mA; V
CE =5V;
f=500MHz; S=opt
4.5 dB
Fig.2 Power derating curve.
handbook, halfpage
0 50 100 200
200
0
MLB587
150T ( C)
o
s
Ptot
(mW)
300
400
100
Fig.3 DC current gain as a function of collector
current; typical values.
VCE =1V.
handbook, halfpage
60
20
40
MBG237
0 110
hFE
IC (mA)
101102
1995 Sep 04 4
NXP Semiconductors Product specification
NPN 1 GHz wideband transistor BFS17W
Fig.4 Feedback capacitance as a function of
collector-base voltage; typical values.
IB=i
b=0; f=1MHz.
handbook, halfpage
0
2
010
MBG238
24
1.5
1
0.5
68
Cre
(pF)
VCB (V)
Fig.5 Transition frequency as a function
of collector current; typical values.
Tamb =25C; f = 500 MHz.
handbook, halfpage
2
1.5
1
MBG239
2.5
10
1
5 V
VCE = 10 V
fT
(GHz)
IC (mA) 102
Fig.6 Minimum noise figure as func tion of
frequency; typic al v alues.
VCE =10V.
handbook, halfpage MBG240
F
(dB)
f (MHz)
20
15
10
5
0103
102
103102101101
1995 Sep 04 5
NXP Semiconductors Product specification
NPN 1 GHz wideband transistor BFS17W
PACKAGE OUTLINE
UNIT A1
max bpcD Ee1HELpQwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.1
1.1
0.8 0.4
0.3 0.25
0.10 2.2
1.8 1.35
1.15 0.65
e
1.3 2.2
2.0 0.23
0.13 0.20.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT323 SC-70
wM
bp
D
e1
e
A
B
A1
Lp
Q
detail X
c
HE
E
vMA
AB
y
0 1 2 mm
scale
A
X
12
3
Plastic surface-mounted package; 3 leads SOT323
04-11-04
06-03-16
1995 Sep 04 6
NXP Semiconductors Product specification
NPN 1 GHz wideband transistor BFS17W
DATA SHEET STATUS
Notes
1. Please consult the most recently issued document before initiating or completing a design.
2. The product status of device(s) described in this document may have changed si nce this document was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DOCUMENT
STATUS(1) PRODUCT
STATUS(2) DEFINITION
Objective data sheet Development T his doc ument contains data from the objective specification for product
development.
Preliminary data sheet Qualification This document contains data from the preliminary specification.
Product data sheet Production This document contains the pr oduct specification.
DEFINITIONS
Product specification The information and da ta
provided in a Product data she et shall define the
specification of the product as agreed between NXP
Semiconductors and its custo m er, unless NXP
Semiconductors and cus to mer have explicitly agreed
otherwise in writing. In no event however, shall an
agreement be valid in which th e NXP Semiconductors
product is deemed to offer functions and qualities beyond
those described in the Product data sh eet.
DISCLAIMERS
Limited warranty and liability Information in this
document is believed to be accurate and reliable.
However, NXP Semiconduc tors does not give any
representations or warranties, expressed or implied, as to
the accuracy or completeness of such information and
shall have no liability for the consequences of use of such
information.
In no event shall NXP Semiconductors be liable for any
indirect, incidental, punitive, special or consequential
damages (including - without limitation - lost profits, lost
savings, busin es s inte rru ption, costs related to the
removal or replacement of any products or rework
charges) whether or not such damages are based on tort
(including negligence), warranty, breach of contract or any
other legal theory.
Notwithstanding any damages that customer might incur
for any reason whatsoever, NXP Semiconductors’
aggregate and cumulative liability towards customer for
the products described herein shall be limited in
accordance with the Terms and conditions of commercial
sale of NXP Semiconductors.
Right to make changes NXP Semiconductors
reserves the right to make changes to information
published in this document, including without limitation
specifications and prod uct descriptions, at any time and
without notice. This document supersedes and replaces all
information su pplied prior to the publication hereof.
Suitability for use NXP Semiconductors products are
not designed, authorized or warranted to be suitable for
use in life support, life-critical or safety-critic al sys tems or
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to res ult in personal inj ur y, de ath or severe
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductor s pr od ucts in such equipment or
application s and therefor e such inclusion and/or use is at
the customer’s own risk.
Applications Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of
their applications and products using NXP
Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or
customer product design. It is customer’s sole
responsibility to determine whether the NXP
Semiconductors pro du ct is su itable and fit for the
customer’s applications and products planned, as well as
for the planned application and use of custom er’s third
party customer(s). Customers should provide appropriate
design and opera ting safeguards to minimi ze the risks
associated with their ap plications and products.
1995 Sep 04 7
NXP Semiconductors Product specification
NPN 1 GHz wideband transistor BFS17W
NXP Semiconductors does not accept any liability related
to any default, damage, cost s or problem which is based
on any weakness or default in the customer’s applications
or products, or the applic ation or use by customer’s third
party customer(s). Customer is responsible for doing all
necessary testing for the customer’s applications and
products using NXP Semic on ductors produc ts in order to
avoid a default of the app lications and the products or of
the application or use by cust omer’s third party
customer(s). NXP does not accept any liability in this
respect.
Limiting values Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) will cause permanent damage to
the device. Limiting values are stress ra tings only and
(proper) operat ion of the device at these or any othe r
conditions above those given in the Recommended
operating conditions section (if present) or the
Characteristics sections of this document is not warranted.
Constant or repeated exposure to limiting values will
permanently and irreversibly affect the qual ity and
reliability of the device.
Terms and conditions of commercial sale NXP
Semiconductors products are sold subject to the general
terms and conditio ns of commercial sale, as published at
http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agre eme nt. In case an
individual agreeme nt is co nc luded only the terms and
conditions of the resp ective agreement shall app ly. NXP
Semiconductors hereby expressly objects to applying the
customer’s general terms and conditions with regard to the
purchase of NXP Semicon ductors products by customer.
No offer to sell or license Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for accepta nc e or the grant, conveyance or
implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national authorities.
Quick refer ence data The Quick reference data is an
extract of th e product data given in the Li miting values and
Characteristics sections of this document, and as such is
not complete, exhaus tive or legally binding.
Non-automotive qualified products Unless this data
sheet expressly states that this specific NXP
Semiconductors product is au tomotive qualified, the
product is not suitable fo r automotive use. It is neither
qualified nor te sted in accorda nce with automot ive testing
or application requirements. NXP Semiconductors accepts
no liability for inclusion and/or use of non-automotive
qualified prod ucts in automotive equipment or
applications.
In the event that customer uses the product for design-in
and use in automotive applications to automotive
specifications and standards, customer (a) shall use the
product without NXP Semiconductors’ warranty of the
product for suc h aut omo tive application s, use and
specifications, and (b) whenever customer uses the
product for automotive applications beyo nd NXP
Semiconductors’ specifications such use shall be so lely at
customer’s own ris k, an d (c) customer fully inde mnifies
NXP Semiconductors for an y liability, damages or failed
product clai ms r esult ing fr om cus to mer d esi gn an d us e of
the product for automotive ap plic ations beyond NXP
Semiconductors st andard warran ty and NXP
Semiconductors’ product specifications.
NXP Semiconductors
provides High Performance Mixed Signal and Standard Product
solutions that leverage its leading RF, Analog, Power Management,
Interface, Security and Digital Processing expertise
Contact information
For additional information p lease visit: http://www.nxp.com
For sales offices addr esses send e- mail to: salesaddresses@nxp.com
© NXP B.V. 2010
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in th is do cum en t d oes not form part of an y quotation or contract, is believed to b e a ccur ate a nd re liable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property ri ghts.
Customer notification
This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal
definitions and disclaimer s. No cha ng es were made to the technic al content, except for package outline
drawings which were updated to the latest version.
Printed in The Netherlands R77/02/pp8 Date of release: 1995 Sep 04