Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 KP AND KP/MMKP RADIAL POTTED CAPACITORS PITCH 15/22.5/27.5 mm P=15mm P=225 to27.5mm DR931960 Fig.1 Simplified outlines. FEATURES QUICK REFERENCE DATA e 15.0 to 27.5 mm lead pitch DESCRIPTION VALUE Supplied loose in box and taped on reel. APPLICATIONS e Where high currents and steep pulses occur For deflection circuits in television receivers. 1996 Oct 21 Capacitance range (E24 series) 0.001 to 0.82 WF Capacitance tolerance 15%; 43.5% Rated voltage (DC) 250 V; 630 V; 1000 V; 1600 V; 2000 V Rated voltage (AC) 125 V; 300 V; 400 V; 500 V; 600 V Rated peak-to-peak voltage 350 V; 850 V; 1100 V; 1400 V; 1700 V Climatic category 55/100/56 Maximum application temperature 100 C Rated temperature 85C Reference specification IEC 384-13 for 250 V version IEC 384-17 for 630 V to 2000 V versions Performance grade, 630 to 2000 V versions: for C > 4.7 nF grade 1 (long life) forC < 4.7 nF grade 2 (general purpose) Stability grade, 630 to 2000 V versions | grade 2 Stability class, 250 version class 3 457Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 KP 376 GENERAL DATA PITCH 27.5 mm co h Z v | Lo | It fo P oy DRO7102 Fig.2 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz Tangent of loss angle: P=27.5mm <10x 104 <25 x 104 Rated voltage pulse slope (dU/dt)g at Urac >10000 V/s R between leads >100000 MQ R between interconnected leads and case >100000 MQ lonization voltage (typical value) at 50 pC peak discharge >400 V (AC) Available 250 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING 7 in bo k=5.0+1.0 mm t5% 2222 376 42... on request o08e IN DOX | = 3.5 40.3 mm +5% 2222 376 48... on request Taped on reel H = 18.5 mm; note 1 +5% 2222 376 45... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 458Philips Components Product specification AC and pulse metallized polypropylene film capacitors KP 376 URde = 250 V; Unac = 125 V/Upp = 350 V loose and taped CATALOGUE NUMBER 2222 376 ..... AND PACKAGING LOOSE IN BOX REEL Cc piwene fons MASS |, = 5.0 +1.0 mm short leads H = 18.5 mm (uF) (mm) (9) last 5 digits of catalogue number SPQ SPQ C-tol = +5% Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0.22 9.0 x 19.0 x 31.0 6.2 42224 100 400 0.24 8.3 42244 0.27 11.0 x 21.0 x 31.0 8.3 42274 100 300 0.3 9.0 42304 0.33 11.0 42334 0.36 11.0 42364 0.39 13.0 x 23.0 x 31.0 11.0 42394 100 250 0.43 11.0 42434 0.47 11.5 42474 0.51 14.2 42514 15.0 x 25.0 x 31.0 100 200 0.56 14.2 42564 0.62 19.0 42624 0.68 19.0 42684 18.0 x 28.0 x 31.0 100 150 0.75 19.0 42754 0.82 19.5 42824 4996 Oct 21 459Philips Components AC and pulse metallized polypropylene film capacitors KP/MMKP 376 GENERAL DATA Product specification KP 376 KP/MMKP 376 PITCH 15/22.5/27.5 mm Fig.3 Outline. DAO7102 Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz Tangent of loss angle: P=15.0 mm <3 x 10+ <10 x 104 P = 22.5mm <3 x 10-4 <15 x 10-4 P=27.5mm <4x 10+ <20 x 10-4 Rated voltage pulse slope (dU/dt), at Urnac >10000 V/us R between leads >100000 MQ R between interconnected leads and case >100000 MQ lonization voltage (typical value) at 50 pC peak discharge >400 V (AC) Available 630 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING +5% 2222 376 62... on request |, = 5.0 +1.0 mm . +3.5% 2222 376 63... on request Loose in box +5% 2222 376 68... on request |, = 3.5 +0.3 mm +3.5% 2222 376 69... on request +5% 2222 376 65... on request Taped on reel H = 18.5 mm; note 1 +3.5% 2222 376 66... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 460Philips Components Product specification AC and pulse ; ; ; KP/MMKP 376 metallized polypropylene film capacitors Unac = 630 V; Upac = 300 V/Up-p = 850 V loose and taped CATALOGUE NUMBER 2222 376 ..... AND PACKAGING DIMENSIONS LOOSE IN BOX REEL c bxhxt MASS = 5.0+1.0 mm short leads H=18.5 mm (uF) (mm) (9) last 5 digits of catalogue number spa sPa C-tol = +5% Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.0068 62682 0.0075 62752 0.0082 5.0 x 11.0 x 17.5 14 62822 1000 41100 0.0091 62912 0.01 62103 0.011 62113 0.012 6.0 x 12.0* 17.5 1.5 62123 1000 900 0.013 62133 0.015 62153 0.016 7.0*13.5 x 17.5 2.0 62163 1000 800 0.018 62183 0.02 62203 0.022 8.5 15.0 x 17.5 2.6 62223 1000 650 Pitch = 22.5 +0.4 mm; d; = 0.80 +0.08 mm 0.024 62243 0.027 6.0 x 15.5 x 26.0 2.8 62273 200 600 0.03 62303 0.033 62333 0.036 7.0 x 16.5 x 26.0 3.5 62363 200 550 0.039 62393 0.043 4.5 62433 0.047 45 62473 0.051 8.5 x 18.0 x 26.0 45 62543 200 450 0.056 5.1 62563 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0.062 62623 0.068 9.0 x 19.0 x 31.0 6.2 62683 100 400 0.075 62753 0.082 62823 0.091 62913 04 11.0 x 21.0 x 31.0 8.3 62104 100 300 0.11 62114 0.12 62124 0.13 62134 0.15 13.0 x 23.0 x 31.0 10.8 62154 100 250 0.16 62164 0.18 62184 02 15.0 x 25.0 x 31.0 13.0 62204 100 200 0.22 62224 0.24 18.0 x 28.0 x 31.0 19.0 62244 100 150 0.27 62274 1996 Oct 21 461Philips Components Product specification AC and pulse metallized polypropylene film capacitors KP/MMKP 376 GENERAL DATA KP 376 KP/MMKP 376 PITCH 15/22.5/27.5 mm en oy ! i ot 20! DRO7102 Fig.4 Outline. Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz Tangent of loss angle: P=15.0 mm <3 x 104 <10x 104 P = 22.5 mm <3 x 10-4 <10 x 10-4 P=275mm <3 x 104 <15x 104 Rated voltage pulse slope (dU/dt)p at Urac >10000 V/ps R between leads >100000 MQ R between interconnected leads and case >100000 MQ lonization voltage (typical value) at 50 pC peak discharge >500 V (AC) Available 1000 V DC versions T FIRST 9 DIGITS OF i PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING +5% 2222 376 72... on request |, = 5.0 1.0 mm . +3.5% 2222 376 73... on request Loose in box +5% 2222 376 78... on request I = 3.5 40.3 mm +3.5% 2222 376 79... on request Taped H= 18.5 te 4 +5% 2222 376 75... on request on ree! = 18.5 mm; note aped on re +3.5% 2222 376 76... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 462Philips Components Product specification AC and pulse . ; . KP/MMKP 376 metallized polypropylene film capacitors Urdc = 1000 V"; Upac = 400 V/Up., = 1100 V loose and taped CATALOGUE NUMBER 2222 376 ..... AND PACKAGING DIMENSIONS LOOSE IN BOX REEL Cc bxhxl MASS i, = 5.0 +1.0 mm short leads H=18.5 mm (HF) (mm) (9) last 5 digits of catalogue number SPQ SPQ C-tol = +5% Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.0047 72472 0.0051 5.0 x 11.0 x 17.5 14 72512 1000 4100 0.0056 72562 0.0062 72622 0.0068 72682 0.0075 6.0 x 12.0 x 17.5 1.5 72752 1000 900 0.0082 72822 0.0091 72912 0.01 72103 0.011 7.0 13.5 x 17.5 2.0 72113 1000 800 0.012 72123 Pitch = 22.5 +0.4 mm; d; = 0.80 +0.08 mm 0.013 6.0 x 15.5 x 26.0 2.8 72133 200 600 0.015 72153 0.016 7.0 x 16.5 x 26.0 3.5 72163 200 550 0.018 72183 0.02 72203 0.022 72223 0.024 72243 0.027 8.5 x 18.0 x 26.0 45 72273 200 450 0.03 72303 0.033 72333 0.036 72363 0.039 10.0 x 19.5 x 26.0 5.4 72393 200 350 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0.043 qT 72433 0.047 9.0 x 19.0 x 31.0 6.2 72473 100 400 0.051 72513 0.056 72563 0.062 72623 0.068 11.0 x 21.0 x 31.0 8.3 72683 100 300 0.075 72753 0.082 72823 0.091 13.0 x 23.0 x 31.0 10.8 72913 100 250 0.1 72104 0.11 72114 0.12 72124 0.13 15.0 x 25.0 x 31.0 13.0 72134 100 200 0.15 72154 0.16 72164 0.18 18.0 x 28.0 x 31.0 19.0 72184 100 150 Note 1. ForC 20.11 uF: Urge = 1000 - 2.75 (C ~ 100) V (C in nF). Capacitors are still marked with 1000 V. 1996 Oct 21 463Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 KP/MMKP 376 GENERAL DATA PITCH 15/22.5/27.5 mm a va ~ Peal DRO7102 Fig.5 Outline. Specific reference data for the 1600 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz Tangent of loss angle: P= 15.0 mm <3 x 10-4 $10 x 10-4 P = 22.5mm <3 x 10-4 <10 x 10-4 P=27.5 mm <3 x 10-4 <15 x 10-4 Rated voltage pulse slope (dU/dt)g at Urac >10000 V/us R between leads >100000 MQ R between interconnected leads and case >100000 MQ lonization voltage (typical value) at 20 pC peak discharge >550 V (AC) Available 1600 V DC versions FIRST 9 DIGITS OF PACKAGING DIMENSIONS C-tol CATALOGUE NUMBER ORDERING +5% 2222 376 82... on request i = 5.0 +1.0 mm L in b +3.5% 2222 376 83... on request o08e In Dox b= 3.540.4m +5% 2222 376 88... on request teen +3.5% 2222 376 89... on request Taped H= 185 tet +5% 2222 376 85... on request = 18.5 mm; apedon ree Hore +3.5% 2222 376 86... on request Note 1. H=in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 464Philips Components AC and pulse metallized polypropylene film capacitors Unde = 1600 V; Unac = 500 V/Up-p = 1400 V Product specification KP/MMKP 376 loose and taped CATALOGUE NUMBER 2222 376 ..... AND PACKAGING DIM LOOSE IN BOX REEL Cc wens tons MASS |, = 5.0 +1.0 mm short leads H = 18.5 mm (nF) (mm) (9) last 5 digits of catalogue number SPQ SPQ C-tol = +5% Pitch = 15.0 +0.4 mm; d, = 0.80 +0.08 mm 0.0018 5.0 x 11.0x 17.5 11 82182 1000 1100 0.002 82202 0.0022 6.0 x 12.0x 17.5 15 82222 1000 900 0.0024 82242 0.0027 82272 0.003 7.0x 13.5 x 17.5 2.0 82302 1000 800 0.0033 82332 0.0036 82362 0.0039 82392 0.0043 8.5 x 15.0 17.5 2.6 32432 1000 650 0.0047 82472 Pitch = 22.5 +0.4 mm; d, = 0.80 +0.08 mm 0.0051 82512 0.0056 82562 0.0062 6.0 x 15.5 x 26.0 2.8 92602 200 600 0.0068 82682 0.0075 82752 0.0082 7.0 x 16.5 x 26.0 3.5 82822 200 550 0.0091 82912 0.01 82103 0.014 82113 0.012 8.5 x 18.0 x 26.0 4.5 82123 200 450 0.013 82133 0.015 10.0 x 19.5 x 26.0 5.4 82153 200 350 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0.016 9.0 x 19.0 x 31.0 6.2 82163 100 400 0.018 82183 0.02 82203 0.022 11.0 x 21.0 x 31.0 74 2093 100 300 0.024 82243 0.027 82273 0.03 82303 0.033 13.0 x 23.0 x 31.0 10.2 82333 100 250 0.036 82363 0.039 82393 0.043 15.0 x 25.0 x 31.0 13.0 82433 100 200 0.047 82473 0.051 82513 1 0.056 18.0 x 28.0 x 31.0 19.0 82563 100 50 1996 Oct 21 465Philips Components AC and pulse metallized polypropylene film capacitors KP/MMKP 376 GENERAL DATA Product specification KP 376 KP/MMKP 376 PITCH 15/22.5/27.5 mm DRO7102 Fig.6 Outline. Specific reference data for the 2000 V DC capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz Tangent of loss angle: P=15.0mm <3 x 104 $10 x 10-4 P=22.5mm <3 x 104 <10 x 10-4 P =27.5mm <3 x 104 $15 x 10-4 Rated voltage pulse slope (dU/dt), at Urac >10000 V/us R between leads >100000 M2 R between interconnected leads and case >100000 MQ lonization voltage (typical value) at 20 pC peak discharge >600 V (AC) Availabie 2000 V DC versions PACKAGING | DIMENSIONS C-tol CATH OGUL NUMIBER ORDERING t5% 2222 376 92... on request = 5.0 +1.0 mm . +3.5% 2222 376 93... on request Loose in box t5% 2222 376 98... on request h= 3.5 20.3 mm 43.5% 2202 376 99... on request Taped on reel H = 18.5 mm: note 1 +5% 2222 376 95... on request +3.5% 2222 376 96... on request Note 1. H = in-tape height; for detailed specifications refer to this handbook, Chapter Packaging. 1996 Oct 21 466Philips Components Product specification AC and pulse . , . KP/MMKP 376 metallized polypropylene film capacitors Urdc = 2000 V; URac = 600 V/U,., = 1700 V loose and taped CATALOGUE NUMBER 2222 376 ..... AND PACKAGING I 5 LOOSE IN BOX REEL c MENSION MASS = 5.0 41.0 mm shortleads | H=18.5mm (uF) (mm) (9) last 5 digits of catalogue number SPQ sPQ C-tol = +5% Pitch = 15.0 +0.4 mm; d; = 0.80 +0.08 mm 0.001 92102 0.0011 5.0x 11.0 17.5 1.1 92112 1000 4100 0.0012 92122 0.0013 92132 0.0018 6.0 x 12.0 x 17.5 15 92152 1000 900 0.0016 92162 0.0018 92182 0002 7.0 x 13.5 x 17.5 2.0 99202 1000 800 0.0022 92222 0.0024 92242 0.0027 8.5 x 15.0 x 17.5 2.6 99079 1000 650 0.003 92302 Pitch = 22.5 +0.4 mm; d; = 0.80 +0.08 mm 0.0033 92332 0.0036 6.0 x 15.5 x 26.0 2.8 92362 200 600 0.0039 92392 0.0043 92432 0.0047 7.0 x 16.5 x 26.0 3.5 92472 200 550 0.0051 92512 0.0056 92562 0.0062 92622 0.0068 8.5 x 18.0 x 26.0 45 92682 200 450 0.0075 92752 0.0082 92822 0.0091 92912 001 10.0 x 19.5 x 26.0 5.4 92103 200 | 350 Pitch = 27.5 +0.4 mm; d; = 0.80 +0.08 mm 0.011 92113 0.012 92123 0013 14.0 x 21.0 x 31.0 7.4 92133 100 300 0.015 92153 0.016 92163 0.018 92183 0.02 13.0 x 23.0 x 31.0 10.2 92903 100 250 0.022 92223 0.024 92243 0.027 15.0 x 25.0 x 31.0 13.0 99273 100 200 0.03 92303 1 0.033 18.0 x 28.0 x 31.0 19.0 92333 100 50 1996 Oct 21 467Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 CONSTRUCTION Description * Low-inductive wound cell of aluminium foii and polypropylene film Potted with epoxy resin ina flame-retardant polypropylene case Radial copper leads, solder-coated Small stand-off pips allow removal of solder flux, etc. during cleaning of the printed-circuit. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, Chapter Packaging. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches of <15 mm the capacitors shall be mechanically fixed by the leads. For larger pitches the capacitors , polypropylene fiim Cae CLEA ETT OTE EE TEEECEIEET aluminium foil S. metal spray layer ~~ connecting wire ~- - 250V KP version polypropylene film. aluminium foil double side metallised . internal electrode ~ metal spray layer connecting wire 630V to 2000V KP/MMKP versions DR932360 Fig.7 Construction. eccentricity 4 Imax = 1+ 0.3 mm ney o te 1 bmax=b+ 0.3mm 4 |. | DR930750 Fig.8 Lay-out. RATINGS AND CHARACTERISTICS Unless otherwise specified, all electrical values apply at an ambient free air temperature of 23 +1 C, an atmospheric pressure of 86 to 106 kPa anda relative humidity of 50 +2%. shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD wes . . For reference testing, a conditioning period shall be applied of 96 +4 hours by heating the products in a circulating air oven at the rated temperature anda relative humidity not exceeding 20%. The maximum length and width of film capacitors is shown in Fig.8: Eccentricity as in Fig.8. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. e Product height with seating plane as given by IEC 717 as reference: hmax sh + 0.3 mm. 1996 Oct 21 468Philips Components Product specification AG and pulse | KP/MMKP 376 metallized polypropylene film capacitors Capacitance All capacitance values are specified at 1 kHz. DRO7103 ACIC (%) 2 0 2 4 -40 0 40 Tamar) 80 Fig.9 Capacitance change as a function of temperature; typical curve. Impedance ORO7104 107 103 104 10 108 107 frequency (Hz) 198 Fig.10 Impedance as a function of frequency; typical curves. 1996 Oct 21 469Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 Temperature * Temperature characteristics related to 20 +2 C: ~55 to +20 C: 0% < AC/C < 3.75% 20 to 100 C: -7% < AC/C <0% * Storage temperature: Tstg = 25 to +40 C with RH maximum 80% without condensation. Voltage e Category voltage: Ucac = 0.7 x Una for T = 100 C Ucac = 0.7 X Upag for T = 100 C e Test voltage between leads: 1.6 x Upgc e Test voltage between interconnected leads and case (foil method): 2840 V (DC). Maximum RMS voltage (sinewave) as a function of frequency for Tamp < 85 C DR932370 10 AC voltage 9) 40? 10 5 6 7 408 104 10 10 f(Hz) 10 Fig.11 AC voltage (RMS value) as a function of frequency at Tamp $ 85 C for Urge = 250 V. 1996 Oct 21 470Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 10? DRO7106 AC voltage v) 10? to! 10 104 108 108 107 f(Hz) 108 Fig.12 AC voltage (RMS value) as a function of frequency at Tamb < 85 C for Unde = 630 V. DRO7107 103 AC voltage ) 107 io4 105 108 10 f(Hz) 10 Fig.13 AC voltage (RMS value) as a function of frequency at Tamp < 85 C for Updc = 1000 V. 1996 Oct 21 471Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 108 DRO7108 AC voltage () 107 10 4 5 6 7 8 10 10 10 10 f (Hz) 10 Fig.14 AC voltage (RMS value) as a function of frequency at Tamp < 85 C for Urge = 1600 V. DRO7109 108 AC voltage (Y) 107 10 7 3 104 108 108 10 f(Hz) 10 Fig.15 AC voltage (RMS value) as a function of frequency at Tamp < 85 C for URdc = 2000 V. 1996 Oct 21 472Philips Components Product specification AC and pulse ; ; ; KP/MMKP 376 metallized polypropylene film capacitors Maximum RMS voltage (sinewave) as a function of frequency for Tamp > 85 C The maximum RMS voltage in Figs 11 to 15 has to be multiplied by a factor given in Fig.16. The power dissipation has to be checked, and must not exceed the maximum allowed power shown in Figs 19 and 20. Fig.16 Multiplying factor as a function of temperature. 1996 Oct 21 473Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 Tangent of loss angle RATED TANGENT OF LOSS ANGLE Ce at 10 kHz at 100 kHz (V) P=15.0mm | P=225mm |) P=27.5mm | P=15.0mm | P=22.5mm | P=27.5mm 250 - - <10 x 10+ - - $25 x 104 630 <3 x 10-4 <3 x 10-4 <4x 10+ $10 x 10-4 $15 x 104 <20 x 104 1000 <3x 104 <3 x 10-4 <3 x 107+ <10 x 10-4 <10 x 10-4 <15 x 10-4 1600 <3 x 10-4 <3 x 10-4 <3x 104 <10x 10+ <10 x 104+ <15 x 10-4 2000 <3 x 10-4 <3x 104 <3 x 10-4 <10 x 104 <10 x 10+ <15 x 10-4 103 ORO7110 dissipation factor (x 10-4) 1022 401 1. 15,0 mm pitch, all series 22.5 mm pitch, 1000V,1600V and 2000V series 2. 22.5 mm pitch, 630V series 27.5 mm pitch, 1000V,1600V and 2000V series 3. 27.5 mm pitch, 250V and 630V series | | 10 : 102 103 104 105 108 fz) 10? Fig.17 Tangent of loss angle as a function of frequency; typical curves. 1996 Oct 21 474Philips Components Product specification AC and pulse . . ; KP/MMKP 376 metallized polypropylene film capacitors Rated voltage pulse slope (dU/dt), >10000 Vus (limited by network conditions). Insulation resistance The insulation resistance is measured after a voltage has been applied for 1 minute +5 seconds, the voltage being 100 +15 V for the 250 V version and 500 +50 V for the 630 V to 2000 V versions, at Tam = 20 C: e R between leads: >100000 MQ e R between interconnected feads and case: >100000 MQ. DROS317 10 RC (s) 105 104 0 20 40 60 80 Tamp @C) 100 Fig.18 RC product as a function of ambient temperature; typical curve. 1996 Oct 21 475Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 Maximum dissipation Power dissipation curves as a function of pitch and 950 DA961390 capacitor thickness (see Figs 19 and 20) p PITCH (nw) Bmax (mm) 200 (mm) 15 22.5 27.5 5.0 1 _ 150 6.0 2 5 - 7.0 3 6 - 100 8.5 4 7 - 9.0 - - 9 50 10.0 - 8 - 11.0 ~ - 10 0 _ _ Go 20 40 60 80 100 13.0 an Tarp (C) 15.0 - - 12 18.0 - - 13 1996 Oct 21 Fig.19 Maximum permissible power dissipation as a function of ambient temperature, at various capacitor dimensions. 4000 DAS61400 Prax (mW) 800 600 400 200 0 20 40 60 80 4100 Tame CC} Fig.20 Maximum permissible power dissipation as a function of ambient temperature, at various capacitor dimensions. 476Philips Components AC and pulse metallized polypropylene film capacitors Application note) To select the capacitor for a certain application, the following conditions must be checked: 1. 2. 3. 4. 5. The peak voltage (Up) shall not be greater than the rated DC voltage (Urac). The peak-to-peak voltage (Up-p) shall not be greater than 2 x J2 times the rated AC voltage (Urac) to avoid the ionisation inception level. There is no limit for the peak current (Ip) or voltage pulse slope (dU/dt) in the application. The dissipated power shall not be greater than the maximum permissible power dissipation stated in Figs 19 and 20. The free air ambient temperature for the capacitor does not exceed the category temperature. Example: C = 10 nF - 1600 V, KP/MMKP - type used for the voltage signal in Fig.21. This is a half sinewave pulse with: Up., = 1200 V; Up = 1100 V; T; = 12 us; To = 64 us. The ambient temperature is 50 C. voltage time Fig.21 Voltage signal. Checking the conditions -oN > The peak voltage Up = 1100 V is lower than 1600 V (DC). The peak-to-peak voltage 1200 V is lower than 2x ./2 times 500 V (AC) = 1414 Up. The voltage pulse slope: of no consideration. The dissipated power is 170 mW as calculated with Fourier terms. This is less than 370 mW, allowed for a capacitor with dimensions: Dmax = 8.5 and pitch = 22.5 mm. The free air ambient temperature is more than 50 C, and lower than 100 C. (1) Peak-to-peak current tables for S-correction application, are available on request. 1996 Oct 21 477 Product specification KP/MMKP 376Philips Components AC and pulse metallized polypropylene film capacitors MARKING Product marking CAPACITORS WITH PITCH 15 mm The capacitors are marked on the top by laser print with the following information: Rated capacitance code in accordance with IEC 62 Tolerance on rated capacitance: J = +5%; A= +3.5% Rated voltage (DC) (e.g. 630 V) Manufacturers type designation (376) 5. Code for dielectric material (KP/MMKP). Bon = The capacitors are marked on the side by laser print with the following information: 1. Manufacturer (PHILIPS) 2. Code for factory of origin (HQ) 3. Year and week of manufacture (e.g. 9238). CAPACITORS WITH PITCH 22.5 OR 27.5 mm The capacitors are marked on the top by laser print with the following information: 1. Rated capacitance code in accordance with IEC 62 Tolerance on rated capacitance: J = +5%; A= 43.5% Rated voltage (DC) (e.g. 1000 V) Manufacturer's type designation (376) Code for dielectric material: KP for 250 V version; KP/MMKP for 630 V to 2000 V versions . Manufacturer (PHILIPS) 7. Code for factory of origin (HQ) 8. Year and week of manufacture (e.g. 9210). ar oN 1996 Oct 21 Product specification KP 376 KP/MMKP 376 HEAD FACE FRONT FACE 680n J 630V 376 KP/MMKP PHILIPS HQ9238 DR941580 Fig.22 Example of marking for a capacitor with pitch 15 mm. HEAD FACE ORSIi590 390n J 250V PHILIPS 376 KP HQ9010 Fig.23 Example of marking for a capacitor with pitch 22.5 or 27.5 mm. 478Philips Components Product specification AC and pulse ve ; KP/MMKP 376 metallized polypropylene film capacitors Package marking The package containing the capacitors is marked as shown in Fig.24. f ~ Barcode label marking | PHILIPS COMPONENTS 2.) MADE IN BELGIUM LINE MARKING EXPLANATION 3.| AC-/PULSE POLYPROP. FILM CAPACITOR 1 Manufacturer's name 4. KP RADIAL POTTED TYPE 2 Country of origin 5.| @.47 pF +5% CSBV= 5S, 100-56 3 Sub-family 4 Type description 5 Capacitance value, tolerance, voltage and 6. climatic category (IEC 68-1) 6 -_ Rye LE TE WO: 12345678 7 Preference origin code: A Country of origin in code: 170 (Belgium) 7) ORIG AL7@ RPC HA les4 Responsible production centre: HQ ee Work order: WO 3.| TYRE KP 376 8 Product type description 9 Quantity and production period, year and NER OEE NER ee | aTY 188 DATE QEOS 10. | CODENO PAA 376 420474 ) CCA3IE Fig.24 Barcode label. 1996 Oct 21 479Philips Components Product specification AC and pulse KP 376 metallized polypropylene film capacitors KP/MMKP 376 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE REQUIREMENTS (quick reference) Robustness of leads Tensile and bending: no visible damage IEC 68-2-21 legible marking Resistance to soldering heat: solder bath: 260 C; 10s |AC/C| <1% IEC 68-2-20 5 4 < Component solvent resistance isopropyl alcohol; 23 C; 5 minutes Atan 5< 10x 10 Robustness of component Vibration: 10 to 55 Hz; amplitude 0.75 mm or | |AC/C| < 2% (C > 0.0047 uF) IEC 68-2-6" acceleration 98 m/s2; 6 hours |AC/C| < 3% (C < 0.0047 LF) Shock: half sinewave; 490 m/s2; 11 ms |AC/C| < 1% (250 V) IEC 68-2-27" Atan 8< 10x 10-4 Climatic sequence Dry heat: 16 hours; 100 C |AC/C| < 3% IEC 68-2-2 Atan 8 < 20x 104 Damp heat, cyclic, test Db, first cycle: . EC 68-2-30" Rins 2 50% of specified value Cold: 2 hours; ~55 C IEC 68-2-1 Damp heat, cyclic, test Db, remaining cycles: 4EC 68-2-30 1996 Oct 21 480Philips Components AC and pulse metallized polypropylene film capacitors Product specification KP/MMKP 376 TEST PROCEDURE (quick reference) REQUIREMENTS Other applicable tests Damp heat, steady state: 56 days; 40 C; 90 to 95% RH |AC/C| < 1% 2.9 IEC 66-2-3 Atan 5 < 10 x 10-4 Rins 2 50% of specified value Endurance (AC): 250 V: 1000 hours; |AC/C| < 3% 4EC 384-13 for: 1.25 x Unac; 85 C 4 250 V version Atan 8 < 20 x 10 IEC 384-17" for: Rings 2 50% of specified vaiue 630 V to 2000 version >250 V: 1000 hours; 85 C 1.25 x Urac; (RMS); 50 Hz |AC/C] < 2% Atan< 15x 10-4 Rins 2 50% of specified value Endurance (DC): EC 384-13 for: 250 V version EC 384-17" for: 630 V to 2000 version 250 V: 2000 hours; 1.5 x Upae; 85 C 1.5 x Ucge; 100 C lAC/C| < 2% Atan 6: as specified in Section Tangent of loss angle of this specification or 1.4 x initial value Ring 2 50% of specified value >250 V: 2000 hours; 1.25 x Unacj 85 C 1.25 x Ucde; 100 C [AC/C] < 3% Atan 6 < 20 x 10+ Ring 2 50% of specified value Heat storage: 4EC 384-13 for: 250 V version {EC 384-177 for: 630 V to 2000 version 2000 hours; 85 C |AC/C| < 2% (250 V) |AC/C] < 3% (>250 V) Atan 8 < 20 x 10-4 Resistance to soldering heat with preheating: 4EC 384-13 tor: 250 V version IEC 384-17 for: 630 V to 2000 version body temperature: 100 C; bath temperature: 260 C; dwell time: 10 s |AC/C] < 2% Atan 8< 10x 104 Passive flammability: IEC 695-2-2 class C no burning Note 1. For detailed information, see Type specification 1996 Oct 21 481