AOT15S60/AOB15S60/AOTF15S60 600V 15A MOS TM Power Transistor General Description Product Summary The AOT15S60& AOB15S60 & AOTF15S60 have been fabricated using the advanced MOSTM high voltage process that is designed to deliver high levels of performance and robustness in switching applications. By providing low RDS(on), Qg and EOSS along with guaranteed avalanche capability these parts can be adopted quickly into new and existing offline power supply designs. VDS @ Tj,max 700V IDM 63A RDS(ON),max 0.29 Qg,typ 16nC Eoss @ 400V 3.6J 100% UIS Tested 100% Rg Tested For Halogen Free add "L" suffix to part number: AOT15S60L & AOB15S60L & AOTF15S60L Top View TO-220 TO-263 TO-220F D 2 D D PAK G G D S AOT15S60 G D S S AOTF15S60 AOB15S60 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter AOT15S60/AOB15S60 Symbol Drain-Source Voltage VDS 600 Gate-Source Voltage VGS TC=25C Continuous Drain Current Pulsed Drain Current TC=100C C S G AOTF15S60L 30 ID Units V V 15 15* 10 10* A IDM 63 Avalanche Current C IAR 2.4 A Repetitive avalanche energy C EAR 86 mJ Single pulsed avalanche energy G TC=25C Power Dissipation B Derate above 25oC MOSFET dv/dt ruggedness Peak diode recovery dv/dt H Junction and Storage Temperature Range EAS PD 173 27.8 W 1.67 0.22 W/ oC 100 20 -55 to 150 dv/dt TJ, TSTG Maximum lead temperature for soldering purpose, 1/8" from case for 5 seconds J TL Thermal Characteristics Parameter Maximum Junction-to-Ambient A,D Symbol RJA V/ns C 300 C AOT15S60/AOB15S60 AOTF15S60L 65 65 C/W 0.5 0.6 -4.5 C/W C/W RCS Maximum Case-to-sink A Maximum Junction-to-Case RJC * Drain current limited by maximum junction temperature. Rev 0: Aug 2011 mJ 208 www.aosmd.com Units Page 1 of 6 AOT15S60/AOB15S60/AOTF15S60 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter Conditions Min Typ Max ID=250A, VGS=0V, TJ=25C ID=250A, VGS=0V, TJ=150C Units 600 - - 650 700 - V A STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current VDS=600V, VGS=0V - - 1 VDS=480V, TJ=150C - 10 - IGSS Gate-Body leakage current VDS=0V, VGS=30V VGS(th) Gate Threshold Voltage VDS=5V,ID=250A RDS(ON) Static Drain-Source On-Resistance VSD Diode Forward Voltage IS ISM - 100 3.2 3.8 n V VGS=10V, ID=7.5A, TJ=25C - 0.254 0.29 VGS=10V, ID=7.5A, TJ=150C - 0.68 0.78 IS=7.5A,VGS=0V, TJ=25C - 0.83 - V Maximum Body-Diode Continuous Current - - 15 A Maximum Body-Diode Pulsed CurrentC - - 63 A - 717 - pF - 58 - pF - 41.2 - pF - 125.2 - pF DYNAMIC PARAMETERS Input Capacitance Ciss Coss Output Capacitance Co(er) Effective output capacitance, energy related H Crss Effective output capacitance, time related I Reverse Transfer Capacitance Rg Gate resistance Co(tr) 2.5 VGS=0V, VDS=100V, f=1MHz VGS=0V, VDS=0 to 480V, f=1MHz VGS=0V, VDS=100V, f=1MHz - 1.3 - pF VGS=0V, VDS=0V, f=1MHz - 13.4 - - 15.6 - nC - 3.5 - nC nC SWITCHING PARAMETERS Total Gate Charge Qg VGS=10V, VDS=480V, ID=7.5A Qgs Gate Source Charge Qgd Gate Drain Charge - 6.0 - tD(on) Turn-On DelayTime - 24.5 - ns tr Turn-On Rise Time - 22 - ns - 84 - ns - 24 - ns tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time VGS=10V, VDS=400V, ID=7.5A, RG=25 Body Diode Reverse Recovery Time Peak Reverse Recovery Current IF=7.5A,dI/dt=100A/s,VDS=400V - 282 - ns Irm IF=7.5A,dI/dt=100A/s,VDS=400V - 26 - Qrr Body Diode Reverse Recovery Charge IF=7.5A,dI/dt=100A/s,VDS=400V - 4.5 - A C A. The value of R JA is measured with the device in a still air environment with T A =25C. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C, Ratings are based on low frequency and duty cycles to keep initial TJ =25C. D. The R JA is the sum of the thermal impedance from junction to case R JC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of T J(MAX)=150C. The SOA curve provides a single pulse rating. G. L=60mH, IAS=2.4A, VDD=150V, Starting TJ=25C H. Co(er) is a fixed capacitance that gives the same stored energy as C oss while VDS is rising from 0 to 80% V(BR)DSS. I. Co(tr) is a fixed capacitance that gives the same charging time as C oss while VDS is rising from 0 to 80% V(BR)DSS. J. Wavesoldering only allowed at leads. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 0: Aug 2011 www.aosmd.com Page 2 of 6 AOT15S60/AOB15S60/AOTF15S60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 25 30 10V 20 7V 5.5V 10 6V 15 6V ID (A) ID (A) 20 15 10V 7V 25 5.5V 10 5V 5V 5 5 VGS=4.5V VGS=4.5V 0 0 0 5 10 15 0 20 5 10 15 20 VDS (Volts) Figure 2: On-Region Characteristics@125C VDS (Volts) Figure 1: On-Region Characteristics@25C 100 1.0 VDS=20V 0.8 10 RDS(ON) ( ) 125C ID(A) -55C 1 25C 0.1 VGS=10V 0.6 0.4 0.2 0.0 0.01 2 4 6 8 0 10 10 15 20 25 30 35 ID (A) Figure 4: On-Resistance vs. Drain Current and Gate Voltage VGS(Volts) Figure 3: Transfer Characteristics 1.2 3 2.5 VGS=10V ID=7.5A BVDSS (Normalized) Normalized On-Resistance 5 2 1.5 1 1.1 1 0.9 0.5 0 -100 -50 0 50 100 150 200 Temperature (C) Figure 5: On-Resistance vs. Junction Temperature Rev 0: Aug 2011 www.aosmd.com 0.8 -100 -50 0 50 100 150 200 TJ (oC) Figure 6: Break Down vs. Junction Temperature Page 3 of 6 AOT15S60/AOB15S60/AOTF15S60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 15 1.0E+02 1.0E+01 125C VDS=480V ID=7.5A 12 25C 1.0E-01 9 VGS (Volts) IS (A) 1.0E+00 1.0E-02 6 1.0E-03 3 1.0E-04 1.0E-05 0 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 7: Body-Diode Characteristics (Note E) 0 5 10 15 20 25 Qg (nC) Figure 8: Gate-Charge Characteristics 10000 8 1000 Eoss(uJ) Capacitance (pF) Ciss Coss 100 Crss 10 6 Eoss 4 2 0 1 0 100 200 300 400 500 VDS (Volts) Figure 9: Capacitance Characteristics 0 600 100 200 300 400 VDS (Volts) Figure 10: Coss stroed Energy 500 100 100 10s 10s RDS(ON) limited 10 100s 1 1ms DC 10ms 0.1 ID (Amps) 10 ID (Amps) 600 RDS(ON) limited 1ms 1 10ms DC 0.1 TJ(Max)=150C TC=25C 0.01 100s 0.1s 1s 10s TJ(Max)=150C TC=25C 0.01 1 10 100 1000 VDS (Volts) Figure 11: Maximum Forward Biased Safe Operating Area for AOT(B)15S60 (Note F) Rev 0: Aug 2011 www.aosmd.com 0.1 1 10 VDS (Volts) 100 1000 Figure 12: Maximum Forward Biased Safe Operating Area for AOTF15S60L(Note F) Page 4 of 6 AOT15S60/AOB15S60/AOTF15S60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 200 20 Current rating ID(A) EAS(mJ) 160 120 80 40 0 15 10 5 0 25 50 75 100 125 TCASE (C) Figure 13: Avalanche energy 150 175 0 25 50 75 100 125 TCASE (C) Figure 14: Current De-rating (Note B) 150 Z JC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=0.6C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 Single Pulse 0.001 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance for AOT(B)15S60 (Note F) Z JC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=4.5C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 16: Normalized Maximum Transient Thermal Impedance for AOTF15S60L (Note F) Rev 0: Aug 2011 www.aosmd.com Page 5 of 6 AOT15S60/AOB15S60/AOTF15S60 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC DUT - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs + VDC 90% Vdd - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 AR BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Tes t Circuit & Waveforms Qrr = - Idt Vds + DUT Vgs Vds - Isd Vgs Ig Rev 0: Aug 2011 L Isd + VDC - IF trr dI/dt IRM Vdd Vdd Vds www.aosmd.com Page 6 of 6