Issue No. : 151XC24C08101 Date of Issue : October 27.2008 Classification : New DIGI-KEY CORPORATION Changed PRODUCT SPECIFICATION FOR APPROVAL Product Description Product Part Number 2 Mode Noise Filter (RoHS) : EXC24CN601X Country of Origin : Applications : : Standard electronic equipment *If you approve this specification, please fill in and sign the below and return 1 copy to us. Approval No : Approval Date : Executed by : (signature) Title : Dept. : Circuit Components Business Unit Prepared by : Panasonic Electronic Devices Co., Ltd. Contact Person : Signature 401 Sadamasa-cho, Fukui City 910-8502 Japan Phone : +81-776-56-8034 Fax : +81-776-56-3114 Engineering Section M.Takeda Name(Print) Title : Authorized by : Signature Y.Morimoto Name(Print) Title : Manager of Engineering Classification No. Specification 151-EXC-24CN202S Product Name Page 1 of 11 2 mode Noise Filter (Type EXC24CN) 1. Scope This specification is applicable to 2 mode Noise Filter, used for general electronic equipment. 2. Dimensions in mm (not to scale) D F E C B A A B C D E Unit: mm (inch) F 1.000.15 (.039.006) 1.250.15 (.049.006) 0.50.1 (.02.004) 0.200.15 (.008.006) 0.650.1 (.025.004) 0.350.1 (.014.004) 3. Structure 1 5 3 2 1 Ni-Zn Ferrite 2 Outer Termination(Ag) 3 Ni Plate 4 Sn Plate 5 Inner Conductor(Ag) 4 4. Schematic Pin No. Inner circuit 4 3 4 3 1 2 1 2 No polarity Constitution Aug.1. 2008 No polarity Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification 151-EXC-24CN202S Product Name Page 2 of 11 2 mode Noise Filter (Type EXC24CN) 5. Part Number EXC 2 4 C N 601 X 1) 2) 3) 4) 5) 6) 7) 1) Product Code ---------------------- EXC: Noise Suppression Filter 2) External Dimensions ------------- 2:(L)1.0mmx(W)1.25mm 3) Number of Terminations -------- 4: 4 pins 4) Type ---------------------------------- C: Multi-layer Ferrite Chip Filter of coupled type 5) Characteristics -------------------- N: Normal Frequency, High Attenuation 6) Common Impedance Value ---- ex) 601: 60 x 10 () 7) Packaging -------------------------- X: Paper Tape(2mm pitch) 6. Rating Part. No. EXC24CN601 Common mode Impedance *1 at 100MHz 600 25% Differential mode Impedance *2 at 100MHz 1000 25% Rated Current (mA DC Rated Voltage (V DC) DC Resistance () 200 5 0.9 max. * Impedance measurement equipment: HP4291A or Corresponding equipment Impedance measurement circuit: *1 Common mode Impedance *2 Differential mode Impedance Z 7. Category Temperature Range -40 to +85 C Constitution Aug.1. 2008 Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Z Classification No. Specification 151-EXC-24CN202S Product Name Page 3 of 11 2 mode Noise Filter (Type EXC24CN) 8. Performance Characteristics Standard test condition Temperature: 15 to 35 C Relative humidity: 25 to 85 % Atmospheric pressure: 86 to 106 kPa When there are questions concerning measurement result Temperature: 202 C Relative humidity: 60 to 70 % Atmospheric pressure: 86 to 106 kPa 8-1. Mechanical Characteristics Item Test Method Specification Solderability Preheating temperature: 150 C Preheating time: 1 min Solder temperature: 2305 C Duration: 40.5 s Immersion speed: 25 mm/s At least 75 % of each termination is covered with the new solder. Resistance to Soldering Heat Preheating temperature: 150 C Preheating time: 1 min Solder temperature: 2605 C Duration: 100.5 s Immersion speed: 25 mm/s Recovery: 484 hours of recovery under the standard condition after the test. No abnormality of appearance Impedance variation: within 30 % Bending Strength Warp: 2 mm Testing board: Glass-epoxy Thickness: 1.0 mm No abnormality of appearance Impedance variation: within 30 % 20 R230 t=1 F 45 Vibration Constitution Aug.1. 2008 45 2 Directions: 2 h each in X, Y, and Z directions (Total: 6 h) Frequency range: 10 to 55 to 10 Hz (Sweep rate: 1 min) Amplitude: 1.5 mm No abnormality of appearance Impedance variation: within 30 % Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification 151-EXC-24CN202S Product Name Page 4 of 11 2 mode Noise Filter (Type EXC24CN) 8-2. Environmental Characteristics Item Heat Cycle Test Method Conditions for 1 cycle Step 1: -403 C, 303 min Step 2: +252 C, 0 to 5 min Step 3: +853 C, 303 min Step 4: +252 C, 0 to 5 min Number of cycle: 5 cycle 1 to 2 hours of recovery under the standard condition after the test Load Life No abnormality of appearance Temperature: 852 C Impedance variation: within 30 % Applied current: Rated current Duration: 500 h 1 to 2 hours of recovery under the standard condition after the test Humidity No abnormality of appearance Temperature: 402 C Impedance variation: within 30 % Humidity: 90 to 95 %RH Duration: 500 h 1 to 2 hours of recovery under the standard condition after the test Constitution Aug.1. 2008 Specification No abnormality of appearance Impedance variation: within 30 % Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification 151-EXC-24CN202S Product Name Page 5 of 11 2 mode Noise Filter (Type EXC24CN) 9. Packaging Method 9-1. Paper Carrier Tape Tape running direction Feeding hole P0 P2 C-C' D0 B W F E C A P1 Chip pocket C' T A 1.170.05 (.05.002) B 1.420.05 (.06.002) W 8.00.2 (.32.008) F 3.50.1 (.14.004) P2 2.00.1 (.08.004) P0 4.00.1 (.16.004) D0 1.50.1 (.06.004) T 0.680.10 (.03.004) E 1.750.1 (.07.004) Unit: mm (inch) P1 2.00.1 (.08.004) 9-2. Reel T W E B C D A A 180.0.3.0 (7.1..12) B 60.0.0.5 (2.4..02) Constitution Aug.1. 2008 C 13.00.5 (.51.02) t D E 21.00.8 2.00.5 (.83..03) (.08..02) W 9.00.3 (.35..01) Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Unit: mm (inch) T t 11.41.5 1.20.1 (.45..06) (.04..004) Classification No. Specification 151-EXC-24CN202S Product Name Page 6 of 11 2 mode Noise Filter (Type EXC24CN) 9-3. Taping Method Tape end: Empty pockets shall be sealed with the cover tape at least 40mm or more. Leader :Empty pockets shall be sealed with the cover tape at least 80mm (40pcs). And including 100mm (50 empty pockets), Insertion leader is 350mm or more. Leader(350mm or more) 100mm or more 40mm or more Blank portions Tape d Cover tape Chip cavity Tape running direction Reel Top Cover tape <Material: polyethylene terephthalate > 165-180deg Peeling direction Paper carrier tape Tape running direction 9-4. Peeling Strength of Cover Tape Tape break force: min. 10N Top cover tape strength: min.10N 0.1 to 1.3 N 9-5. Label Indication A label indicating the following shall be put on each reel and box. 1) Part Name 2) Part No. 3) Quantity Label Reel Box Constitution Aug.1. 2008 Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. 4) Lot No. Classification No. Specification 151-EXC-24CN202S Product Name Page 7 of 11 2 mode Noise Filter (Type EXC24CN) 9-6. Shipping Package Quantity / reel Quantity / box 10,000 pcs. 50,000 pcs. max. (5 reels max.) 10. Chip-mounting Considerations 10-1. Recommended Land Pattern (Only for Reflow Soldering) B E D A C D F E A 1.50 to 1.70 (0.06 to 0.07) B 1.10 (0.043) C 0.50 (0.020) D 0.50 to 0.70 (0.02 to 0.03) E 0.40 (0.016) F 0.30 (0.012) Unit: mm (inch) 1) When this products are mounted on a PCB, the amount of solder used (size of fillet) can directly affect this product performance. 2) The amount of solder applied can affect the ability of products to withstand mechanical stresses which may lead to breaking or cracking. Therefore, when designing land-patterns it is necessary to consider the appropriate size and configuration of the solder pads which in turn determines the amount of solder necessary to form the fillets. 10-2. Pattern Configurations 1) After this products have been mounted on the PC boards, products can be subjected to mechanical stresses in subsequent manufacturing processes. For this reason, planning pattern configurations and the position of SMD inductors should be carefully performed to minimize stress. 2) Board separation should not be done manually, but by using the appropriate devices. 10-3. Considerations for Automatic Chip-Mounting Excessive impact load should not be imposed on the inductors when mounting onto the PC boards. Constitution Aug.1. 2008 Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification 151-EXC-24CN202S Product Name Page 8 of 11 2 mode Noise Filter (Type EXC24CN) 10-4. Reflow Soldering < Recommended Temperature Profile in Reflow Soldering > The limit of resistance to reflow soldering heat (above 200 C) 260 Rising temp. 1 Preheating Gradual cooling Rising Main heating temp. 2 Temperature (C) Temperature of termination 270 250 240 230 220 210 200 0 10 20 Time Solder SnPb eutectic (Sn-37Pb) SnAgCu lead-free (Sn-3Ag-0.5Cu) 30 40 50 60 70 Time (s) Rising temp. 1 Preheating Rising temp. 2 Main heating Gradual cooling The normal to Preheating temp. 140 to 160 C Preheating to 200 C 23510 C 200 to 100 C 30 to 60 s 60 to 120 s 20 to 40 s Peak 1 to 4 C/s The normal to Preheating temp. 150 to 170 C Preheating to 210 C 250 +10 C -5 210 to 100 C 30 to 60 s 60 to 120 s 20 to 40 s Peak 1 to 4 C/s 1) Reflow soldering shall be within twice. 2) Please inqire of us when you use the different conditions. 3) The temperature may be changed according to the size of the board and the mounting density, etc. Please measure the temperature of termination in each type of the board before actual use. 10-5. Repair with Hand Soldering 1) Allow enough preheating with a blast of hot air or similar method. Use a soldering iron with the tip temperature 350 C or less. Solder for 3 seconds or less for each termination. 2) Never touch this product with a tip of the solder iron. Constitution Aug.1. 2008 Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification Product Name 151-EXC-24CN202S Page 2 mode Noise Filter (Type EXC24CN) 9 of 11 11. Notice for use 1. This specification shows the quality and performance of a unit component. sure to evaluate and verify the product mounting it in your product. Before adoption, be 2. Precautions on the use of this products. 1) Do not apply current in excess of the rated value because this product may be high temperature. 2) Always wear static control bands to protect against ESD. 3) Keep this products away from all magnets and magnetic object. 3. In traffic transportation equipment (trains, cars, traffic signal equipment, etc.), medical equipment, aerospace equipment, electric heating appliances, combustion and gas equipment, disaster and crime preventive equipment, etc. in cases where it is forecast that the failure of this product gives serious damage to the human life and others, use fail-safe design and ensure safety by studying the following items. 1) Ensure safety as the system by setting protective circuit and protective equipment. 2) Ensure safety as the system by setting such redundant circuit as do not cause danger by a signal failure. 4. The products are intended for use in general standard applications for general electronic equipment (AV products, household electric appliances, office equipment, information and communication equipment, etc.); hence, they do not take the use under the following special environments into consideration. Accordingly, the use in the following special environments, and such environmental conditions may affect the performance of the products; prior to use, verify the performance, reliability, etc. thoroughly. 1) Use in liquids such as water, oil, chemical, and organic solvent 2) Where the product is close to a heating component, and where an inflammable such as a polyvinyl chloride wire is arranged close to the product. 3) Use in environment with large static electricity and strong electromagnetic waves 4) Where water or water-soluble detergent is used in cleaning free soldering or in flux cleaning after soldering(Pay particular attention to soluble flux) 5) Storage in places outside the temperature range of -5 to 40 C and humidity range of 40 to 60 %RH 6) Use or storage in places exposed to open-air, dusty atmosphere, and direct sunlight 7) Use or storage in places full of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, and Nox 8) Use or storage in such a place where the product is wetted due to dew condensation 9) Where the product is sealed or coated with resin, etc. 10) Storage over six months after our delivery on the shipment day (This item also applies to the case where the storage method specified in item 5) to 8) has been followed.) 5. In case that there are any doubt about safety problems, please inform us early and be sure to evaluate and verify the product mounting it in your product before adoption. Constitution Aug.1. 2008 Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification Product Name 151-EXC-24CN202S Page 2 mode Noise Filter (Type EXC24CN) 10 of 11 12. Regulation 1) This product has not been manufactured with any ozone depleting chemical controlled under the Montreal Protocol . 2) All materials used in this product are existing chemical substances recognized under " laws on examination of chemical substances and regulations of manufacturing and others." 3) All materials used in this products contain no brominated materials of PBBOs or PBBs as the flame-retardant . 4) Please contact us to obtain a notice as to whether this product has passed inspection under review criteria primarily based on Foreign Exchange and Foreign Trade Control law and appended table in the Export Control law. 5)This product complies with the RoHS Directive (Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (DIRECTIVE 2002/95/EC)). 13. Production Site Panasonic Electronic Devices Japan Co., Ltd. (JAPAN) Constitution Aug.1. 2008 Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd. Classification No. Specification 151-EXC-24CN202S Product Name Page 11 of 11 2 mode Noise Filter (Type EXC24CN) Impedance Characteristics <Reference Data> * EXC24CN601 Common mode 700 Impedance (ohm) 600 500 400 300 200 100 1 10 100 1,000 10,000 1,000 10,000 Frequency (MHz) Differential mode 1,600 Impedance (ohm) 1,400 1,200 1,000 800 600 400 200 1 10 100 Frequency (MHz) <Measurement Method > Z Z Common mode Constitution Aug.1. 2008 Differential mode Circuit Components Business Unit Panasonic Electronic Devices Co., Ltd.