Issue No. : 151XC24C08101
Date of Issue :
DIGI-KEY CORPORATION Classification : New Changed
:2 Mode Noise Filter (RoHS)
:EXC24CN601X
:
:Standard electronic equipment
*If you approve this specification, please fill in and sign the below and return 1 copy to us.
Approval No :
Approval Date :
Executed by :
(signature)
Title :
Dept. :
Circuit Components Business Unit Prepared by : Engineering Section
Panasonic Electronic Devices Co., Ltd. Contact Person :
Signature M.Takeda
401 Sadamasa-cho, Name(Print)
Fukui City 910-8502 Japan Title :
Authorized by :
Phone : +81-776-56-8034 Signature Y.Morimoto
Fax : +81-776-56-3114 Name(Print)
Title : Manager of Engineering
October 27.2008
Applications
P
RODUCT SPECIFICATION FOR APPROVA
L
Product Description
Product Part Number
Country of Origin
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 1 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
1. Scope
This specification is applicable to 2 mode Noise Filter, used for general electronic equipment.
2. Dimensions in mm (not to scale)
Unit: mm (inch)
E
A
B
C
D
F
A B C D E F
1.00±0.15
(.039±.006) 1.25±0.15
(.049±.006) 0.5±0.1
(.02±.004) 0.20±0.15
(.008±.006) 0.65±0.1
(.025±.004) 0.35±0.1
(.014±.004)
3. Structure 1
2
3 4
5
1 Ni-Zn Ferrite
2 Outer Termination(Ag)
3 Ni Plate
4 Sn Plate
5 Inner Conductor(Ag)
4. Schematic
Pin No. Inner circuit
1 2
4 3
1 2
4 3
No polarity No polarity
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 2 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
5. Part Number
E X C 2 4 C N 601 X
1) 2) 3) 4) 5) 6) 7)
1) Product Code ---------------------- EXC: Noise Suppression Filter
2) External Dimensions ------------- 2:(L)1.0mmx(W)1.25mm
3) Number of Terminations -------- 4: 4 pins
4) Type ---------------------------------- C: Multi-layer Ferrite Chip Filter of coupled type
5) Characteristics -------------------- N: Normal Frequency, High Attenuation
6) Common Impedance Value ---- ex) 601: 60 × 10 (Ω)
7) Packaging -------------------------- X: Paper Tape(2mm pitch)
6. Rating
Differential
mode
Impedance *2
Common
mode
Impedance *1
Part. No.
at 100MHz at 100MHz
Rated
Current
(mA DC
Rated
Voltage
(V DC)
DC
Resistance
(Ω)
EXC24CN601 600Ω± 25% 1000Ω± 25% 200 5 0.9 max.
* Impedance measurement equipment: HP4291A or Corresponding equipment
Impedance measurement circuit:
*1 Common mode Impedance *2 Differential mode Impedance
Z
Z
7. Category Temperature Range
-40 to +85 °C
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 3 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
8. Performance Characteristics
Standard test condition
Temperature: 15 to 35 °C
Relative humidity: 25 to 85 %
Atmospheric pressure: 86 to 106 kPa
When there are questions concerning measurement result
Temperature: 20±2 °C
Relative humidity: 60 to 70 %
Atmospheric pressure: 86 to 106 kPa
8-1. Mechanical Characteristics
Item Test Method Specification
Solderability
Preheating temperature: 150 °C
Preheating time: 1 min
Solder temperature: 230±5 °C
Duration: 4±0.5 s
Immersion speed: 25 mm/s
At least 75 % of each termination is
covered with the new solder.
Resistance to
Soldering Heat Preheating temperature: 150 °C
Preheating time: 1 min
Solder temperature: 260±5 °C
Duration: 10±0.5 s
Immersion speed: 25 mm/s
Recovery:
48±4 hours of recovery under the
standard condition after the test.
No abnormality of appearance
Impedance variation: within ±30 %
Bending Strength Warp: 2 mm
Testing board: Glass-epoxy
Thickness: 1.0 mm
No abnormality of appearance
Impedance variation: within ±30 %
Vibration Directions: 2 h each in X, Y, and Z
directions (Total: 6 h)
Frequency range: 10 to 55 to 10 Hz
(Sweep rate: 1 min)
Amplitude: 1.5 mm
20 R230
2
4545
t=1 F
No abnormality of appearance
Impedance variation: within ±30 %
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 4 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
8-2. Environmental Characteristics
Item Test Method Specification
Heat Cycle Conditions for 1 cycle
Step 1: -40±3 °C, 30±3 min
Step 2: +25±2 °C, 0 to 5 min
Step 3: +85±3 °C, 30±3 min
Step 4: +25±2 °C, 0 to 5 min
Number of cycle: 5 cycle
1 to 2 hours of recovery under the
standard condition after the test
No abnormality of appearance
Impedance variation: within ±30 %
Load Life Temperature: 85±2 °C
Applied current: Rated current
Duration: 500 h
1 to 2 hours of recovery under the
standard condition after the test
No abnormality of appearance
Impedance variation: within ±30 %
Humidity Temperature: 40±2 °C
Humidity: 90 to 95 %RH
Duration: 500 h
1 to 2 hours of recovery under the
standard condition after the test
No abnormality of appearance
Impedance variation: within ±30 %
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 5 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
9. Packaging Method
9-1. Paper Carrier Tape
Unit: mm (inch)
A B W F
Feeding hole P0 P2 D0
T
P1
C’
C
F
W
E
B
A Chip pocket
C-C’
Tape running direction
E P1
1.17±0.05
(.05±.002) 1.42±0.05
(.06±.002) 8.0±0.2
(.32±.008) 3.5±0.1
(.14±.004) 1.75±0.1
(.07±.004) 2.0±0.1
(.08±.004)
P2 P0 D0 T
2.0±0.1
(.08±.004) 4.0±0.1
(.16±.004) 1.5±0.1
(.06±.004) 0.68±0.10
(.03±.004)
9-2. Reel
Unit: mm (inch)
A B C D E W
A
T
W
t
D
C
E
B
T t
180.0±.3.0
(7.1±..12) 60.0±.0.5
(2.4±..02) 13.0±0.5
(.51±.02) 21.0±0.8
(.83±..03) 2.0±0.5
(.08±..02) 9.0±0.3
(.35±..01) 11.4±1.5
(.45±..06) 1.2±0.1
(.04±..004)
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 6 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
9-3. Taping Method
Tape end: Empty pockets shall be sealed with the cover tape at least 40mm or more.
Leader :Empty pockets shall be sealed with the cover tape at least 80mm (40pcs).
And including 100mm (50 empty pockets), Insertion leader is 350mm or more.
40mm or more
Tape
d
Chip cavity
Tape running direction
Reel
Leader(350mm or more)
100mm or more
Blank portions Cover tape
Paper carrier tape Tape running direction
165-180deg
Top Cover tape <Material: polyethylene terephthalate >
Peeling direction
9-4. Peeling Strength of Cover Tape
Tape break force: min. 10N
Top cover tape strength: min.10N 0.1 to 1.3 N
9-5. Label Indication
A label indicating the following shall be put on each reel and box.
1) Part Name 2) Part No. 3) Quantity 4) Lot No.
Label
Reel Box
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 7 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
9-6. Shipping Package
Quantity / reel Quantity / box
10,000 pcs. 50,000 pcs. max. (5 reels max.)
10. Chip-mounting Considerations
10-1. Recommended Land Pattern (Only for Reflow Soldering)
A 1.50 to 1.70 (0.06 to 0.07)
B 1.10 (0.043)
C 0.50 (0.020)
D 0.50 to 0.70 (0.02 to 0.03)
E 0.40 (0.016)
F 0.30 (0.012)
Unit: mm (inch)
B
E
A C
D
D
FE
1) When this products are mounted on a PCB, the amount of solder used (size of fillet) can
directly affect this product performance.
2) The amount of solder applied can affect the ability of products to withstand mechanical
stresses which may lead to breaking or cracking.
Therefore, when designing land-patterns it is necessary to consider the appropriate size
and configuration of the solder pads which in turn determines the amount of solder
necessary to form the fillets.
10-2. Pattern Configurations
1) After this products have been mounted on the PC boards, products can be subjected to
mechanical stresses in subsequent manufacturing processes. For this reason, planning
pattern configurations and the position of SMD inductors should be carefully performed to
minimize stress.
2) Board separation should not be done manually, but by using the appropriate devices.
10-3. Considerations for Automatic Chip-Mounting
Excessive impact load should not be imposed on the inductors when mounting onto the PC
boards.
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 8 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
10-4. Reflow Soldering
< Recommended Temperature Profile in Reflow Soldering >
The limit of resistance to reflow
soldering heat (above 200 °C)
Solder Rising temp. 1 Preheating Rising temp. 2
Gradual
cooling
Rising
temp. 2 Main heating
Preheating
Rising
temp. 1
270
Temperature of termination
260
Temperature (°C)
250
240
230
220
210
200 0 10 20 30 40 50 60 70
Time Time (s)
Main heating Gradual cooling
The normal to
Preheating temp. 140 to 160 °C Preheating to 200 °C 235±10 °C 200 to 100 °C
SnPb eutectic
(Sn-37Pb) 30 to 60 s 60 to 120 s 20 to 40 s Peak 1 to 4 °C/s
The normal to
Preheating temp. 150 to 170 °C Preheating to 210 °C 250 °C 210 to 100 °C
SnAgCu lead-free
(Sn-3Ag-0.5Cu) 30 to 60 s 60 to 120 s
+10
-5
20 to 40 s Peak 1 to 4 °C/s
1) Reflow soldering shall be within twice.
2) Please inqire of us when you use the different conditions.
3) The temperature may be changed according to the size of the board and the mounting
density, etc. Please measure the temperature of termination in each type of the board
before actual use.
10-5. Repair with Hand Soldering
1) Allow enough preheating with a blast of hot air or similar method. Use a soldering iron
with the tip temperature 350 °C or less. Solder for 3 seconds or less for each termination.
2) Never touch this product with a tip of the solder iron.
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 9 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
11. Notice for use
1. This specification shows the quality and performance of a unit component. Before adoption, be
sure to evaluate and verify the product mounting it in your product.
2. Precautions on the use of this products.
1) Do not apply current in excess of the rated value because this product may be high
temperature.
2) Always wear static control bands to protect against ESD.
3) Keep this products away from all magnets and magnetic object.
3. In traffic transportation equipment (trains, cars, traffic signal equipment, etc.), medical equipment,
aerospace equipment, electric heating appliances, combustion and gas equipment, disaster and
crime preventive equipment, etc. in cases where it is forecast that the failure of this product gives
serious damage to the human life and others, use fail-safe design and ensure safety by studying
the following items.
1) Ensure safety as the system by setting protective circuit and protective equipment.
2) Ensure safety as the system by setting such redundant circuit as do not cause danger by a
signal failure.
4. The products are intended for use in general standard applications for general electronic
equipment (AV products, household electric appliances, office equipment, information and
communication equipment, etc.); hence, they do not take the use under the following special
environments into consideration. Accordingly, the use in the following special environments,
and such environmental conditions may affect the performance of the products; prior to use,
verify the performance, reliability, etc. thoroughly.
1) Use in liquids such as water, oil, chemical, and organic solvent
2) Where the product is close to a heating component, and where an inflammable such as a
polyvinyl chloride wire is arranged close to the product.
3) Use in environment with large static electricity and strong electromagnetic waves
4) Where water or water-soluble detergent is used in cleaning free soldering or in flux cleaning
after soldering(Pay particular attention to soluble flux)
5) Storage in places outside the temperature range of -5 to 40 °C and humidity range of 40 to
60 %RH
6) Use or storage in places exposed to open-air, dusty atmosphere, and direct sunlight
7) Use or storage in places full of corrosive gases such as sea breeze, Cl2, H2S, NH3, SO2, and
Nox
8) Use or storage in such a place where the product is wetted due to dew condensation
9) Where the product is sealed or coated with resin, etc.
10) Storage over six months after our delivery on the shipment day (This item also applies to
the case where the storage method specified in item 5) to 8) has been followed.)
5. In case that there are any doubt about safety problems, please inform us early and be sure to
evaluate and verify the product mounting it in your product before adoption.
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 10 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
12. Regulation
1) This product has not been manufactured with any ozone depleting chemical controlled under the
Montreal Protocol .
2) All materials used in this product are existing chemical substances recognized under " laws on
examination of chemical substances and regulations of manufacturing and others."
3) All materials used in this products contain no brominated materials of PBBOs or PBBs as the
flame-retardant .
4) Please contact us to obtain a notice as to whether this product has passed inspection under
review criteria primarily based on Foreign Exchange and Foreign Trade Control law and
appended table in the Export Control law.
5)This product complies with the RoHS Directive (Restriction of the use of certain Hazardous
Substances in electrical and electronic equipment (DIRECTIVE 2002/95/EC)).
13. Production Site
Panasonic Electronic Devices Japan Co., Ltd. (JAPAN)
Classification No.
Specification 151-EXC-24CN202S
Product Name 2 mode Noise Filter (Type EXC24CN) Page 11 of 11
Constitution
Aug.1. 2008 Circuit Components Business Unit
Panasonic Electronic Devices Co., Ltd.
Impedance Characteristics <Reference Data>
• EXC24CN601
Common mode
-
100
200
300
400
500
600
700
1 10 100 1,000 10,000
Frequency (MHz)
Impedance (ohm)
Differential mode
-
200
400
600
800
1,000
1,200
1,400
1,600
1 10 100 1,000 10,000
Frequency (MHz)
Impedance (ohm)
<Measurement Method >
ZZ
Common mode Differential mode
