DPF-2
MODEL DPF1000
AC INPUT[V] AC85 - 264 AC170-264
MAX OUTPUTWATTAGE[W] 1,000 1,500
DC OUTPUTVOLTAGE[V] DC360
SPECIFICATIONS
MODEL DPF1000
INPUT
VOLTAGE[V] AC85 -264 1fAC170 -264 1f
POWER FACTOR CORRECTION RANGE[V]
AC85 -255 1f
CURRENT[A] 11.5typ (ACIN 100V)8.5typ (ACIN 200V)
FREQUENCY[Hz] 50/60 (47-63)
INRUSH CURRENT[A] Limitedbyexternal resistance
EFFICIENCY[%] 90typ (ACIN 100V)95typ (ACIN 200V)
POWER FACTOR 0.98typ (ACIN 100V)0.95typ (ACIN 200V)
LEAKAGE CURRENT[mA]
0.75max (60Hz,Accordingto IEC60950 and DEN-AN)
OUTPUT
WATTAGE[W]
*1
1,000 1,500
VOLTAGE[V]
*2
DC360
VOLTAGE ACCURACY[V]
*3
t20
PROTECTION
CIRCUIT AND
OTHERS
OVERVOLTAGE PROTECTION[V]
DC400-450 The powerfactor corrector function stops
IOG
Inverter operation monitoring,Open-collector output,Maximum sink current 10mA,Maximum allowancevoltage 35V
ENA Enable signal,Open-collector output,Maximum sink current 10mA,Maximum allowance voltage 35V
AUXAuxiliarypower supplyfor external signal,Outputvoltage:6.5 - 8.5V maximum,Output current:10mA
OTHERS
Parallel operation possible (Current balancing function), N+1 redundant operation possible,Thermal protection
ISOLATION
INPUT-OUTPUT Non isolated
INPUT,OUTPUT-FG AC3,000V 1minute Cutoff current=10mA,DC500V,50MWmin (20t15C)
ENVIRONMENT
OPERATINGTEMP.,HUMID.ANDALTITUDE
*4
-20to +85C(Aluminum base plate), 20-95%RH (Non condensing)(
Refer to DERATING CURVE), 3,000m (10,000feet)max
STORAGE TEMP.,HUMID.ANDALTITUDE
-40 to +85C,20-95%RH (Non condensing), 9,000m (30,000feet)max
VIBRATION 10-55Hz,49.0m/s2(5G), 3minutes period,60minutes each alongX
,Y and Z axis
IMPACT 196.1m/s2(20G), 11ms,once eachX
,Yand Z axis
SAFETY AGENCY APPROVALS UL60950-1,C-UL,EN60950-1,EN50178 Complies with DEN-AN and IEC60950-1
HARMONICATTENUATOR
Complies with IEC61000-3-2
OTHERS CASE SIZE/WEIGHT 118.6X12.7X85mm [4.67X0.5X3.35 inches] (WXHXD)/200g max
COOLINGMETHOD Conduction cooling (e.g. heatradiation from the aluminum base plateto the attached heat sink)
*5
*1 Refer to Input voltage derating.
*2
When the input voltage is more than 255V, the power factor corrector function stops, and the
output voltage becomes rectified AC input voltage.
*3
The value included the output setting and the line regulation, the load regulation and the
temperature regulation.
However, the input voltage is in the power factor correction range.
*4
Please consult us in regard to use from -40C.
*5
Please contact us about class C.
*
External components are required. Refer to standard connection method.
DPF1000
AC-DC Power Supplies Bus Converter∙Power Module Type
DPF 1000
Ordering information
1 Series name
2 Output wattage
R
1 2
DPF-3
¡OUTPUT VOLTAGE FOR INPUT
¡STATIC CHARACTERISTICS
OUTPUT VOLTAGE
¡HARMONIC CURRENT (AC100V)¡HARMONIC CURRENT (AC230V)
HARMONIC ORDER HARMONIC ORDER
OUTPUT CURRENT A
HARMONIC CURRENT A
HARMONIC CURRENT A
V
OUTPUT VOLTAGEV
INPUT VOLTAGE V
Input Voltage AC100V
Input Voltage AC200V
Output Wattage 1000W
Output Wattage 1500W
Harmonic current standard
of class A (at odd number)
Harmonic current standard
of class A (at odd number)
0
0
310
330
350
370
390
0.81.6 2.43.2 4.04.8 5.66.4 7.28.0 0
0
300
320
340
360
380
400
100 140 180 220 260
10 20 30 40
10.0
0.01
0.1
1.0
0.001 1 10 20 30 40
10.0
0.1
0.01
1.0
0.001 1
DPF1000
External view
Performance data
¶Recomending size for processing PCB
(TOP VIEW)
44.72.54
t0.5
12.7
t0.1
1
t0.5
3.0
t0.5
101.6
13.97
21.59
13.97
106.68
50.8
t1
85
t1
118.6
106.68
2.54 2.54
[0.02]
[0.03]
[0.1] [0.1]
[0.07] [0.05]
[0.1] [1.76]
[4.2]
[4.2]
[4]
[4.67]
[0.04]
[0.01]
[0.1]
[0.55] [0.55]
[0.5]
[2]
[3.35]
[0.85]
[0.12][0.12]
–
0.5
+
1
3.0
t=0.8
t
0.1
AC IN/DC OUT PIN SIGNAL PIN
4-
º
0.6
t
0.1
Lot No.
4-M3
Mounting Hole for Heat Sink(FG)
Aluminum Base Plate
Case
(PBT)
4-M3
Mounting
Hole
(FG)
¶Dimensions in mm,[ ]= inches
¶Div. : 0.5inch
5-º1.7 4-º1.2
A
0.31
2.54
¶Weight: 200g max
¶Tolerance: t0.3 [t0.012]
¶Base Plate: Aluminum
¶Dimensions in mm,[ ]= inches
¶Mounting torque
• Mounting hole screwing torque 0.49N•m(5.0kgf•cm)max
A
ENA
IOG
AUX
CB
AC1
AC2
– VOUT
Name Plate
+VOUT
R
AC IN
DC OUT
SIGNAL PIN 4-º3.5
13.97 13.97
[0.54]
[0.85]
[2.0]
[0.54]
[0.1]
[0.14]
[4.2]
[1.75][0.1]
50.8
21.59
2.54
0.31
44.7
106.68
2.54
