A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4 Data Sheet R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER DESCRIPTION The PS2805C-1 and PS2805C-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light. FEATURES * * * * <R> * * <R> * High isolation voltage (BV = 2 500 Vr.m.s.) Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) High collector to emitter voltage (VCEO : 80 V) AC input response Ordering number of tape product: PS2805C-1-F3, PS2805C-4-F3 Pb-Free product Safety standards * UL approved: No. E72422 * CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) * BSI approved (BS EN 60065, BS EN 60950) (PS2805C-1 only) * DIN EN 60747-5-5 (VDE 0884-5) approved (Option) PIN CONNECTION (Top View) 4 3 1 2 PS2805C-1 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector PS2805C-4 16 15 14 13 12 11 10 9 APPLICATIONS * * * * Programmable logic controllers OA equipment Measuring instruments Hybrid IC 1 2 3 4 5 6 7 8 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode, Cathode Cathode, Anode Emitter Collector The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 1 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e PACKAGE DIMENSIONS (UNIT: mm) PS2805C-1 PS2805C-4 2.70.3 10.30.3 16 9 1 2 1 8 7.00.3 4.4 4.4 0.10.1 0.50.3 1.27 0.40.1 0.12 M <R> 0.15+0.10 -0.05 7.00.3 2.0+0.3 -0.2 2.00.1 0.15+0.10 -0.05 3 0.10.1 4 0.40+0.10 -0.05 0.12 M 1.27 0.50.3 PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 4.5 mm Outer Creepage Distance Inner Creepage Distance Isolation Distance 4.5 mm 2.5 mm 0.1 mm R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 2 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e <R> MARKING EXAMPLE PS2805C-1 Company initial Made in Taiwan R5C 301 Last 2 numbers of type No. : 5C Assembly Lot 301 Week Assembled Year Assembled (Last 1 digit) Made in Japan R5C 301 " " (Square) :Made in Japan PS2805C-4 PS2805C-4 R PS2805C-4 NL301 Country Assembled Assembly Lot No. 1 pin Mark N L 3 01 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L: Pb-Free) Rank Code R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 3 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e <R> ORDERING INFORMATION Part Number Order Number PS2805C-1-F3 PS2805C-1-F3-A PS2805C-4-F3 Solder Plating Specification Pb-Free PS2805C-4-F3-A Packing Style Safety Standards Approval Embossed Tape 3 Standard products 500 pcs/reel (UL, CSA, BSI approved) Embossed Tape 2 Application Part Number*1 PS2805C-1 PS2805C-4 500 pcs/reel PS2805C-1-V-F3 PS2805C-1-V-F3-A PS2805C-4-V-F3 PS2805C-4-V-F3-A Embossed Tape 3 DIN EN 60747-5-5 500 pcs/reel (VDE0884-5) Approved (Option) Embossed Tape 2 PS2805C-1 PS2805C-4 500 pcs/reel Note: *1. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Diode Parameter Symbol Ratings PS2805C-1 PS2805C-4 Unit Forward Current (DC) IF 30 mA/ch Power Dissipation Derating Power Dissipation PD/C 0.6 0.8 mW/C PD 60 80 mW/ch IFP 0.5 A/ch Collector to Emitter Voltage VCEO 80 V Emitter to Collector Voltage VECO 5 V IC 30 mA/ch PC/C 1.2 mW/C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage Notes: *2 *1. PW = 100 s, Duty Cycle = 1% *2. AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2805C-1). Pins 1-8 shorted together, 9-16 shorted together (PS2805C-4). R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 4 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode TYP. MAX. Unit Forward Voltage Symbol VF IF = 5mA Conditions 1.2 1.4 V Terminal Capacitance 20 Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO VCE = 80 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time Fall Time <R> *2 Turn-on Time Notes: pF 50 0.13 10 VCC = 5 V, IC = 2 mA, RL = 100 100 nA 400 % 0.3 V 11 0.4 pF 5 s tf 7 *2 ton 10 *2 toff 7 Turn-off Time <R> MIN. *1. CTR rank PS2805C-1 N : 50 to 400 (%) M : 100 to 400 (%) PS2805C-4 N : 50 to 400 (%) M : 100 to 400 (%) *2. Test circuit for switching time VCC Pulse Input PW = 100 s Duty Cycle = 1/10 Input ton IF td toff ts VOUT 50 RL = 100 90% Output 10% tr R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 tf Page 5 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 80 PS2805C-4 60 0.8 mW/C PS2805C-1 40 0.6 mW/C 20 0 0 25 50 75 100 125 10 160 PS2805C-1 PS2805C-4 120 1.2 mW/C 80 40 0 0 25 50 75 100 125 Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 TA = +100C +60C +25C Collector Current IC (mA) Forward Current IF (mA) 50 200 Ambient Temperature TA (C) 100 5 0 C -25C -55C 1 0.5 CTR = 250% IF = 10 mA 25 20 5 mA 15 10 2 mA 5 1 mA 0.1 0.05 0.7 Collector to Emitter Dark Current ICEO (nA) 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 0 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 10 000 IF = 10 mA 5 mA Collector Current IC (mA) <R> VCE = 80 V 1 000 70 V 100 24 V 10 1 0 25 50 CTR = 200% 75 100 Ambient Temperature TA (C) 2 mA 1 mA 1 0.1 0 0.2 0.4 0.6 CTR = 250% 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 6 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 Current Transfer Ratio CTR (%) 1.2 1.0 80% 0.8 0.6 0.4 Normalized to 1.0 0.2 at TA = 25C, IF = 5 mA, VCE = 5 V 0 -75 -50 -25 0 100 Switching Time t ( s) 400 CTR = 250% 25 50 75 VCE = 5 V, n=3 300 Sample A B C 200 100 0 0.01 100 0.1 1 10 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IC = 2 mA, VCC = 5 V, CTR = 228% IF = 5 mA, VCC = 5 V, CTR = 228% tf Switching Time t (s) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE tr 10 td ts 1 tf 100 ts 10 tr td 0.1 10 100 1 000 10 000 1 1 10 100 Load Resistance RL (k) Load Resistance RL () FREQUENCY RESPONSE 5 Normalized Gain Gv 0 100 -5 RL = 1 k -10 -15 300 -20 IF = 5 mA, VCE = 5 V -25 0.1 1 10 100 1 000 Frequency f (kHz) Remark The graphs indicate nominal characteristics. R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 7 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e TAPING SPECIFICATIONS (UNIT: mm) 2.00.1 4.00.1 1.5+0.1 -0 16.00.3 7.550.1 1.750.1 Outline and Dimensions (Tape) 7.50.1 2.8 MAX. 0.3 1.550.1 2.30.1 2.850.1 4.00.1 Tape Direction PS2805C-1-F3 R5C 301 R5C 301 R5C 301 R5C 301 R5C 301 Outline and Dimensions (Reel) 2.00.5 13.00.2 R 1.0 21.00.8 1001.0 2.00.5 3302.0 <R> 17.51.0 21.51.0 Packing: 3 500 pcs/reel R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 15.9 to 19.4 Outer edge of flange Page 8 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e 10.70.1 2.8 MAX. 16.00.3 1.5+0.1 -0 7.50.1 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 0.3 2.30.1 8.30.1 1.550.1 12.00.1 Tape Direction PS2805C-4-F3 Outline and Dimensions (Reel) R 1.0 21.00.8 1001.0 2.00.5 13.00.2 3302.0 2.00.5 17.51.0 21.51.0 Packing: 2 500 pcs/reel R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 15.9 to 19.4 Outer edge of flange Page 9 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) <R> (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron * Peak Temperature (lead part temperature) 350C or below * Time (each pins) 3 seconds or less * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 10 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collectoremitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 Page 11 of 12 A Business Partner of Renesas Electronics Corporation. PS2805C-1, PS2805C-4e SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage <R> Test voltage (partial discharge test, procedure a for type test and random test) <R> Upr = 1.6 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) UIORM Upr 705 1 128 Vpeak Vpeak Upr 1 322 Vpeak UTR 6 000 Vpeak Upr = 1.875 x UIORM, Pd < 5 pC Highest permissible overvoltage <R> Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg -55 to +150 C Operating temperature range TA -55 to +100 C Ris MIN. Ris MIN. 10 11 10 Package temperature Tsi 150 C Current (input current IF, Psi = 0) Isi 300 mA Power (output or total power dissipation) Psi 500 mW Ris MIN. 10 Isolation resistance, minimum value VIO = 500 V dc at TA = 25C VIO = 500 V dc at TA MAX. at least 100C 12 Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = Tsi R08DS0074EJ0300 Rev.3.00 Jan 9, 2013 9 Page 12 of 12 Revision History PS2805C-1, PS2805C-4 Data Sheet Rev. Date Page 1.00 3.00 May 30, 2006 Jan 9, 2013 - Throughout p.1 p.2 p.3 p.4 Description Summary This data sheet was released as PN10611EJ01V0DS Renesas format is applied to this data sheet. The ordering number and safety standards are revised. PHOTOCOUPLER CONSTRUCTION is added as each distance of this device. The explanation in MARKING EXAMPLE is revised. ORDERING INFORMATION is modified with the revision of the safety standards. p.5 Turn-on Time (ton) and Turn-off Time (toff) are added to the table in ELECTRICAL CHARACTERISTICS. p.6 The graph of DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE and TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE are revised The graph of LONG TERM CTR DEGRADATION is deleted. p.7 p.8 p.9 PS2805C-1-F4 is deleted form Tape Direction image in TAPING SPECIFICATIONS. PS2805C-4-F4 is deleted form Tape Direction image in TAPING SPECIFICATIONS. p.10 The note about temperature condition of the recommended soldering conditions is deleted. p.12 The values in SPECIFICATION OF VDE MARKS LICENSE DOCUMENT are changed as follows. -- Test voltage is changed from the factor, 1.5, and the value, 1058, to 1.6 and 1128, respectively. -- Clearance distance is moved to PHOTOCOUPLER CONSTRUCTION with changing 5.0 (min.) to 4.5 (min.). All trademarks and registered trademarks are the property of their respective owners. C-1 NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas 8. Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. NOTE 1: "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters * 4590 Patrick Henry Drive, Santa Clara, CA 95054 * Phone (408) 919-2500 * www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus