XBA170 DUAL POLE OptoMOS(R) Relay Load Voltage Load Current Max RON XBA170 350 100 50 Description XBA170 is 350V, 100mA, 50 independent 1-Form-A and 1-Form-B relays. It provides an economical solution where cost is critical and high performance is not a necessity. Units V mA Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # XBA170 XBA170P XBA170PTR XBA170S XBA170STR Description 8 Pin DIP (50/ Tube) 8 Pin Flatpack (50/ Tube) 8 Pin Flatpack (1000/ Reel) 8 Pin Surface Mount (50/ Tube) 8 Pin Surface Mount (1000/ Reel) Pin Configuration XBA170 Pinout AC/DC Configuration + Control - Normally Closed - Control - Normally Closed + Control - Normally Open - Control - Normally Open 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Open (Form A) Devices Normally Closed Pole Normally Open Pole Switching Characteristics of Normally Closed (Form B) Devices 10ms 10ms CONTROL CONTROL 90% + + 90% LOAD 10%+ 10%+ TON DS-XBA170-R2 www.clare.com TOFF + 90% +10% TOFF TON 1 XBA170 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Min - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW 3750 -40 -40 - VRMS +85 C +125 C - - +260 +220 C C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitanmce Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation 2 Conditions Symbol Min Typ Max Units - VL - - 350 V 10ms IL ILPK - - 100 350 mA mA IL=120mA VL=350V RON ILEAK - 33 - 50 1 A IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT 1 1 - 25 5 5 - ms ms pF - - - 3 - pF IL=Load Current IF=5mA VR=5V - IF IF VF VR IR CI/O VI/O 5 0.4 0.9 3750 0.7 1.2 3 - 50 1.4 5 10 - mA mA V V A pF VRMS www.clare.com Rev. 2 XBA170 PERFORMANCE DATA* XBA170 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C; IF = 5mADC) 25 Device Count (N) Device Count (N) 30 25 20 15 10 5 20 15 10 5 1.17 1.19 1.21 1.23 1.25 15 10 5 30.59 31.36 32.13 32.90 33.66 34.43 35.20 On-Resistance () On-Resistance () XBA170 - FormA Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) XBA170 - FormB Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) XBA170 - FormA Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 25 25 20 20 20 15 10 5 Device Count (N) 25 Device Count (N) Device Count (N) 20 29.09 29.86 30.63 31.40 32.16 32.93 33.70 LED Forward Voltage Drop (V) 15 10 5 0 0 15 10 5 0 424.0 429.3 434.5 439.7 444.9 450.1 455.4 424.0 429.3 434.5 439.7 444.9 450.1 455.4 0.44 20 20 20 5 Device Count (N) 25 Device Count (N) 25 10 15 10 5 0.50 0.56 0.62 0.69 0.75 0.44 0.81 0.50 5 0.56 0.62 0.69 0.75 0.44 0.81 XBA170 - FormB Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) Device Count (N) 20 Device Count (N) 25 20 5 15 10 5 0 0 0.75 0.83 0.91 0.99 Turn-On (ms) 1.06 1.14 0.56 0.62 0.69 0.75 0.81 XBA170 - FormA Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) 25 0.67 0.50 LED Current (mA) 20 10 0.81 10 25 15 0.75 15 LED Current (mA) LED Current (mA) XBA170 - FormA Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) 0.69 0 0 0 0.62 XBA170 - FormB Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 25 15 0.56 LED Current (mA) XBA170 - FormA Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) XBA170 - FormB Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 100mADC) 0.44 0.50 Blocking Voltage (V) Blocking Voltage (V) Device Count (N) XBA170 - FormB Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC, IF=5mADC) 0 0 0 Device Count (N) 25 Device Count (N) 35 XBA170 - FormA Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 100mADC, IF=5mADC) 15 10 5 0 0.11 0.14 0.17 0.19 0.22 0.25 Turn-On (ms) 0.28 0.11 0.14 0.17 0.19 0.22 0.25 0.28 Turn-Off (ms) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 3 XBA170 PERFORMANCE DATA* XBA170 - FormB Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC) XBA170 - Form A Typical Load Current vs. Temperature 15 10 5 XBA170 - Form B Typical Load Current vs. Temperature 160 160 140 140 Load Current (mA) 20 Load Current (mA) Device Count (N) 25 120 100 80 20mA 10mA 5mA 60 40 20 0 0.75 0.83 0.91 0.99 1.06 1.14 -20 0 20 80 100 0.010 0.008 0.006 0.002 0 -40 40 60 20 80 60 80 100 120 XBA170 - FormB Typical Blocking Voltage vs. Temperature 455 450 445 440 435 430 425 -40 100 40 450 450 440 435 430 425 -20 0 20 40 60 80 420 100 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) XBA170 - FormA Typical Turn-On vs. Temperature (Load Current = 100mADC) XBA170 - FormB Typical Turn-On vs. Temperature (Load Current = 100mADC) XBA170 - FormA Typical Turn-Off vs. Temperature (Load Current = 100mADC) Turn-On (ms) 1.4 1.2 1.0 10mA 0.8 20mA 0.4 0.2 0 -20 0 20 40 60 80 100 120 5mA -40 -20 0 Temperature (C) 1.6 5mA 1.2 1.0 0.8 10mA 0.6 20mA 0.4 0.2 20 40 60 80 -40 100 120 -20 0 20 80 100 120 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 0 20 40 60 60 80 100 120 XBA170 - FormA Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 1.6 -20 40 Temperature (C) 1.8 -40 0 0 60 XBA170 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 -20 40 5mA Temperature (C) XBA170 - FormB Typical Turn-Off vs. Temperature (Load Current = 100mADC) 1.4 20 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 Turn-On (ms) 0.6 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 Turn-Off (ms) 5mA 1.6 -40 0 Temperature (C) 1.8 -40 -20 Temperature (C) 420 20 5mA 40 120 Blocking Voltage (VRMS) 0.012 0.004 Turn-On (ms) 60 XBA170 - FormA Typical Blocking Voltage vs. Temperature Blocking Voltage (VRMS) Leakage (A) 0.014 Turn-Off (ms) 40 455 0.016 0 60 Temperature (C) XBA170 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) -20 80 0 -40 Turn-Off (ms) -40 100 20 0 0.67 120 80 Temperature (C) Temperature (C) 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2 XBA170 PERFORMANCE DATA* XBA170 - FormB Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 0 5 10 15 20 25 30 35 40 45 50 0 5 10 LED Forward Current (mA) 25 30 35 40 45 0 50 6.0 60 5.0 40 30 20 50 40 30 20 10 10 0 0 0 20 40 60 80 100 LED Current (mA) 70 50 120 4.0 3.0 2.0 -20 0 0 40 60 60 80 100 80 0 1 2 3 4 20 40 60 80 100 120 XBA170 - FormB Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 4.0 3.0 2.0 0 20 40 60 80 100 120 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 -40 -4 -3 -2 -1 0 1 Load Voltage (V) -20 0 20 40 60 80 100 120 Temperature (C) XBA170 Energy Rating Curve Load Current (A) Load Current (mA) -1 Load Voltage (V) 0 0 -20 XBA170 - FormB Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC -2 -20 1.0 XBA170 - FormA Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC -3 50 5.0 Temperature (C) -4 45 6.0 -40 100 120 40 Temperature (C) Temperature (C) 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 -40 120 2.0 0 20 40 3.0 1.0 0 20 4.0 1.0 35 2.0 LED Current (mA) 5.0 LED Current (mA) 6.0 30 3.0 XBA170 - FormA Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 5.0 25 4.0 Temperature (C) 6.0 20 0 -40 XBA170 - FormB Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) -20 15 1.0 Temperature (C) -40 10 XBA170 - FormA Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) 60 -20 5 LED Forward Current (mA) 70 -40 LED Current (mA) 20 XBA170 - FormB Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) On-Resistance () On-Resistance () 15 LED Forward Current (mA) XBA170 - FormA Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) Load Current (mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Turn-Off (ms) Turn-On (ms) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 XBA170 - FormB Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) XBA170 - FormA Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) 2 3 4 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 5 XBA170 Mechanical Dimensions 9.652 .381 (.380 .015) 8 Pin DIP Through Hole (Standard) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) 9.144 TYP. (.360) .457 .076 (.018 .003) 7.620 .127 (.300 .005) 8.077 .127 (.318 .005 ) 9.652 .381 (.380 .015) 8 Pin DIP Surface Mount ("S" Suffix) 4.445 .127 (.175 .005) 3.302 (.130) .254 TYP. (.010) (.100 .005) 9.525 .254 (.375 .010) 6.350 .127 (.250 .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 .127 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 1.498 .127 (.059 .005) 8.077 .127 (.318 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) 8 Pin Flatpack ("P" Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 7.620 .254 (.300 .010) 2.286 MAX. .635 .127 (.090) (.025) 7.620 .127 (.300 .005) 6.350 .127 (.250 .005) 6.350 .127 (.250 .005) 9.398 .127 (.370 .005) 8.763 .127 (.345 .005) .203 (.008) 1.193 (.047) .457 .076 (.018 .003) 8.077 .127 (.318 .005) .787 (.031) Dimensions mm (inches) 6 www.clare.com Rev. 2 XBA170 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) Top Cover Tape Thickness .102 MAX. (.004) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier Embossment 16.002 .305 (.630 .012) .050R TYP. 11.988 .102 (.472 .004) 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) User Direction of Feed Dimensions mm (inches) Rev. 2 www.clare.com 7 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-XBA170-R2.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/25/02