https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Sensor/Actuator cable, 3-position, PUR halogen-free, Black-gray RAL 7021, Plug straight M12, Acoded, on A valve plug, with 1 LED, connected with Z diode, Cable length: 1.5 m The illustration shows the SPEEDCON version Key commercial data Packing unit 0 Minimum order quantity 1 GTIN Custom tariff number 85444290 Country of origin POLAND Technical data General data Rated current at 40C 4A Rated voltage 24 V Number of positions 3 Volume resistance 5 m Insulation resistance 100 M Length of cable 1.5 m Ambient temperature (operation) -25 C ... 90 C (Male connector / female connector) Ambient temperature (operation) -20 C ... 85 C (valve plug) General characteristics Standards/regulations M12 connector IEC 61076-2-101 Standards/regulations Valve connector EN 175301-803 Coding A - standard Surge voltage category III Pollution degree 3 Degree of protection IP65/67 Insertion/withdrawal cycles 100 (M12 connector) Torque 0.4 Nm (M12 connector) 08.08.2012 Page 1 / 7 https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Technical data General characteristics Torque 0.6 Nm (Valve plug-in connector) Contact material CuSn Contact surface material Ni/Au Contact carrier material TPU GF Material of grip body TPU Contact material CuSn Contact surface material Sn Valve plug contact insert material PA 66 Material housing valve plug TPU Material, knurls Zinc die-cast, nickel-plated Sealing material TPU (Seal molded) Status display 1 LED Protective circuit/component Z diode Conductor data Cable type PUR halogen-free black Cable type (abbreviation) PUR Cable abbreviation Li9Y11Y-HF UL AWM Style 20549 Conductor cross section 3x 0.5 mm AWG signal line 20 Conductor structure signal line 28x 0.15 mm Core diameter including insulation 1.5 mm 0.05 mm (signal line) External cable diameter 4.5 mm 0.2 mm Wire colors Black 1, black 2, green/yellow External sheath, color Black-gray RAL 7021 Insulation resistance min. 20 M*km Conductor resistance 39 /km (at 20 C) Nominal voltage, conductor 300 V Test voltage, conductor 1200 V Overall twist 3 wires, twisted Outer sheath, material PUR Material conductor insulation PP Conductor material Bare Cu litz wires Smallest bending radius, fixed installation 22.5 mm Number of bending cycles 15000000 Bending radius 50 mm Traversing path 0.9 m Traversing rate 5 m/s Acceleration 30 m/s Ambient temperature (operation) -40 C ... 80 C (cable, fixed installation) Ambient temperature (operation) -20 C ... 80 C (cable, flexible installation) 08.08.2012 Page 2 / 7 https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Technical data Conductor data Flame resistance According to DIN VDE 0482 Flame resistance According to DIN EN 50265-2-1 Halogen-free in accordance with DIN VDE 0472 part 815 Other resistance Largely oil-resistant Other resistance partly UV-resistant in accordance with DIN EN ISO 4892-2-A Classifications eclass eCl@ss 4.0 27060306 eCl@ss 4.1 27060306 eCl@ss 5.0 27061801 eCl@ss 5.1 27061801 eCl@ss 6.0 27061801 eCl@ss 7.0 27061801 etim ETIM 3.0 EC001855 ETIM 4.0 EC001855 unspsc UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Accessories Accessories Assembly Screw - SAC-V-SCREW-M3-29 KNURL - 1403779 Fillister head screw with plastic knurl, M3 x 40 Fuse 08.08.2012 Page 3 / 7 https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Accessories Fuse clip - SAC-M12-EXCLIP-M - 1558988 Fuse clip for the pin side of various M12 sensor/actuator connectors prevents plug-in connections being interrupted without using a tool Marking Insert label - PABA WH/15 - 1013151 Insert label, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Thread on, Cable diameter: 0.6-50 mm, Lettering field: 15 x 4 mm Insert label - PABA YE/15 - 1013698 Insert label, yellow, Unlabeled, Can be labeled with: Plotter, Mounting type: Thread on, Cable diameter: 0.6-50 mm, Lettering field: 15 x 4 mm Insert label - PABA RD/15 - 1013944 Insert label, red, Unlabeled, Can be labeled with: Plotter, Mounting type: Thread on, Cable diameter: 0.6-50 mm, Lettering field: 15 x 4 mm Conductor marker carrier - PATO 2/15 - 1013122 Conductor marker carrier, transparent, Unlabeled, Mounting type: Clip on, Cable diameter: 2.8-5 mm, Lettering field: 4 x 15 mm 08.08.2012 Page 4 / 7 https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Accessories Conductor marker carrier - PATO 3/15 - 1013135 Conductor marker carrier, transparent, Unlabeled, Mounting type: Clip on, Cable diameter: 5-8 mm, Lettering field: 4 x 15 mm Conductor marker carrier - PATO 4/15 - 1013148 Conductor marker carrier, transparent, Unlabeled, Mounting type: Clip on, Cable diameter: 8-10 mm, Lettering field: 4 x 15 mm Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm Protection and sealing elements Sealing cap - PROT-M12 FS-PA-CHAIN - 1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 sockets Tools Screw insert - SF-BIT-PH 1-70 - 1212582 Screw bit, PH crosshead, E6.3-1/4" drive, size: PH 1 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173 08.08.2012 Page 5 / 7 https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Accessories Torque screwdriver - TSD 04 SAC - 1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors Torque screwdriver - TSD-M 1,2NM - 1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.3 1.2 Nm Adapter insert - TSD-M SAC-BIT ADAPTER - 1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits Tool - SAC BIT M12-D15 - 1208432 Nut for assembling sensor/actuator cables with M12 connector and for M12 connectors with QUICKON fast connection technology, for 4 mm hexagonal drive Drawings Schematic diagram Schematic diagram 3 4 5 1 2 Pin assignment M12 plug, 3-pos., valve connector Valve connector pin assignment, type A 08.08.2012 Page 6 / 7 https://www.phoenixcontact.com/us/produkte/1400770 Sensor/Actuator cable - SAC-3P-M12MS/1,5-PUR/A-1LZ - 1400770 Cable cross section Dimensioned drawing 43 28 18 28 1 2 PUR halogen-free black [PUR] Valve plug, type A Dimensioned drawing 28,2 Dimensioned drawing 9,9 O11 M12 O14,8 46,8 Valve connector, type A, side view M12 x 1 male connector, straight Circuit diagram 3 YE 4 5 2 1 PE Contact assignment of M12 plug and valve connector (c) Phoenix Contact 2012 - all rights reserved http://www.phoenixcontact.com 08.08.2012 Page 7 / 7