
Preliminary Product Brief *
December 17, 2003
For Discussion with Tyco Electronics Customers Only – Tyco Electronics Proprietary
I) This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed.
II) CSA is a registered trademark of Canadian Standards Association.
III) UL is a registered trademark of Underwriters Laboratories, Inc.
IV) VDE is a trademark of Verband Deutcher Elektrotechniker e.V.
Austin SuperLynxTM II 12V Non-isolated SMT
Output Current 16A; 8.3 – 14Vdc input range
Programmable output voltage from 0.75Vdc to
5.0Vdc
EZ-SEQUENCETM
• Flexible Output voltage sequencing
• Delivers up to 16A of output current
• High Efficiency: 92% @ 3.3V full load
• Small size and low profile:
33.0 mm x 13.5 mm x 8.28 mm
(1.30 in x 0.53 in x 0.326 in)
• Programmable output voltage
• Exceptional Thermal Performance
• Low cost open frame design
• SMT package available in Tape & Reel
• Lead Free Directive compatible
The Austin SuperLynxTM II 12V SMT power modules
are non-isolated dc-dc converters that can deliver up to
16A of output current with full load efficiency of 92% at
3.3V output. These modules provide a precisely
regulated output voltage ranging from 0.75Vdc to
5.0Vdc, programmable via an external resistor over a
wide input voltage range of 8.3Vdc to 14Vdc. The
Austin SuperLynxTM II has a sequencing feature that
enables designers to implement various types of output
voltage sequencing when powering multiple voltages on
a board. The open-frame construction and small
footprint enables designers to develop cost- and space-
efficient solutions. In addition to sequencing, features
include remote On/Off, output voltage adjustment,
remote sense, over temperature and over current
protection.
Applications
• Distributed Power Architecture
• Intermediate Bus voltage applications
• Latest generation ICs (DSP, FPGA, ASIC)
and Microprocessor powered applications
• Access and Optical Network Equipment
• Data processing Equipment
• Wireless and Enterprise Equipment
Specification
• Precisely regulated output Voltage (± 2% max)
• Wide input voltage range 8.3Vdc – 14Vdc
• Line regulation 0.3% of Vo,set (typical)
• Load regulation 0.4% of Vo,set (typical)
• Temperature Regulation 0.4% of Vo,set (typical)
• Ripple and noise (5Hz to 20MHz bandwidth)
– 30mV RMS (max)
– 75mVpk-pk (max)
• Operating temperature range: -40°C to 85 °C
• Monotonic start-up into pre-biased output
• Remote On/Off
• Remote Sense
• Output voltage sequencing (EZ-SEQUENCETM)
Protection
• Over current protection (non-latching)
• Over temperature protection (non-latching)
• Input under voltage lockout
Options
• Remote on/off positive logic
• Remote on/Off negative logic
I II III