TSDMTX-19V3-EVM - SEMTECH INTERNATIONAL

TSDMTX-19V3-EVM

Wireless Charging Transmitter

www.semtech.com

WIRELESS CHARGING

User Guide

LinkCharge™ 20 Series

Wireless Charging

3rd Generation (V3) Transmitter

User Guide Rev 2.0 www.semtech.com 1 of 27

TSDMTX-19V3-EVM May-18 Semtech

Introduction

The Semtech TSDMTX-19V3-EVM is an evaluation platform for test and experimentation of a wireless charging

transmitter based on the Semtech TS80003 Wireless Power Transmitter Controller, TS61002 FET Driver, TS30011

DC/DC Converter, and TS94033 Current Sense Amplifier. This evaluation module provides a complete system

solution and is compatible with the Wireless Power Consortium (WPC) or Qi standards of power transmission,

making this transmitter an ideal platform for powering the majority of wireless receivers in use today.

Objectives

The objective of this User Guide is to provide a fast, easy and thorough method to fully test and evaluate the

Semtech solutions for wireless charging systems. Semtech offers a range of solutions to meet the needs of a wide

range of system developers. Developers are provided with all the information on how this EVM was built as a

starting point for their own designs using the TS80003 and other Semtech components.

Features

 19V Input / 20W Output Power

 WPC1.2.2 compliant

 Supports various smartphones fast charging protocols (with latest firmware)

 Supports up to 15W output power with WPC1.2 receivers

 Supports up to 20W output power with Semtech receivers

Please make sure to download the latest software visit www.semtech.com/wireless-charging to

download the latest EVM software for your evaluation board

Table of Contents

Wireless Charging Concepts ...................................................................................................................2

Product Description ............................................................................................................................... 3

Standard Use ........................................................................................................................................ 5

Firmware Management ........................................................................................................................ 10

FOD Test ............................................................................................................................................. 14

Documentation.................................................................................................................................... 15

A. Block Diagram ........................................................................................................................ 15

B. Schematic .............................................................................................................................. 16

C. Bill Of Materials “BOM” .......................................................................................................... 19

D. Board Layout ......................................................................................................................... 21

E. Board Layers .......................................................................................................................... 21

FAQs ................................................................................................................................................... 25

Next Steps ........................................................................................................................................... 26

User Guide Rev 2.0 www.semtech.com 2 of27

TSDMTX-19V3-EVM May-18 Semtech

Wireless Charging Concepts

Wireless power transfer is, essentially, a transformer. Current is provided to a primary coil which produces an

electromagnetic (EM) field. In this field, a secondary coil is placed. The EM field induces a current into the

secondary coil, providing power to whatever it is connected to.

However, unlike a conventional power transformer that operates at line frequencies and requires an iron core for

efficiency, wireless power systems are designed to operate in the 100 kHz range, and thus can perform efficiently

with an air core. As such, the primary and secondary windings, if closely spaced, can be in separate devices, the

primary being part of a transmitter and the secondary within a receiver. This implementation can also be

described as a radio broadcast process, and as such, these transformer coils can also be seen as antennas with

equal validity, and the two terms will be used interchangeably in this text.

Wireless power systems differ in another major aspect from conventional transformers, in that they are

intelligently managed. A transmitter will only provide power when a receiver is present, and only produce the

amount of power requested by the receiver. In addition, the system is capable of recognizing when the

electromagnetic field has been interrupted by an unintended element, a 'foreign object', and will shut down the

transfer to prevent any significant amount of power being absorbed by anything but a proper receiver. The

intelligent management of the wireless power transmission process is achieved though the programming of the

TS80003, which first searches for a receiver. Once found, the receiver informs the transmitter of its power

requirements, and transmission begins. The system then verifies the right amount of power being sent, and that

no power is being lost to foreign objects. The receiver will continually provide ongoing requests for power to

maintain the transaction. If the requests cease, the transaction terminates. Via this protocol, even complex

charging patterns can be supported, as the transmitter can provide varying amounts of power at different times,

as requested by the receiver. If the receiver requires no further power, such as when a battery is fully charged, it

can request no further power being sent, and the transmitter will reduce its output accordingly.

Wireless power systems have been broken into three power categories. “Wearable” devices, such as headsets,

wrist-band devices, medical sensors etc - operate in the low power range, up to 3 watts. Medium power devices, in

the 5- to 15-watt range, include handheld devices, such as cell phones, tablets, and medical electronics. High

power systems support devices such as power tools, radio controlled (“RC”) devices such as drones, and other

equipments requiring 15 to 100 watts of power.

Receiver

Transmitter

Control

Electromagnetic

Flux

Controller FET Array

Power

Supply

Regulation Rectifier

End

Equipment

Power

User Guide Rev 2.0 www.semtech.com 3 of 27

TSDMTX-19V3-EVM May-18 Semtech

Product Description

The TSDMTX-19V3-EVM Evaluation Module is a ready-to-use demonstration platform allowing testing of up to 15

watts of wireless power transmission compliant with the dominant industry WPC/Qi standard.

The transmitter may be coupled with any Qi receiver module to form a complete wireless power transmission

system. For the system designer, a likely choice might be the complementary Semtech TSDMRX-19V/20W-EVM,

which can allow a variety of experiments to easily be performed in order to learn more about the behavior of the

system.

There are a number of other Semtech Receiver EVMs that support different power levels and output voltages, any

of which can be used as they are compatible with Qi standard and therefore are compatible with the TSDMTX-

19V3-EVM transmitter.

In addition, the evaluator can also use any existing Qi compliant product, though the limited access these devices

offer may make the range of experiments that can be performed more limited.

Those who wish to develop their own board, or integrate this functionality into an existing system can use the

EVM as a starting point for their design, as it demonstrates a working model from which to proceed. Toward this

end, all documentation for the EVM is provided to make the process as efficient as possible.

The key technology in the EVM is the Semtech TS80003 integrated circuit, which controls the system and

implements the Qi protocol. Developers can vary the supporting componentry to meet their goals as desired.

In this user guide, an introduction will be provided to the evaluator about how to use the EVM for wireless power

transmission as well as how the TSDMRX-19V/20W-EVM can be used in conjunction with it.

Once the system is set up and working, a selection of tests and activities will be described that the evaluator can

choose to perform.

User Guide Rev 2.0 www.semtech.com 4 of27

TSDMTX-19V3-EVM May-18 Semtech

LED Behavior

The red and green LEDs on the EVM let the user know what the transmitter is doing as it operates. As seen in the

diagram below, when power is applied, the transmitter initializes as indicated by the green LED lighting for about

a half second. Next, as the transmitter searches for a nearby receiver, no LED is lit, keeping power to a minimum

level in this standby state. When a receiver is located, the transmitter receives instructions on the upcoming

transaction to perform. Power is then transmitted and the green LED flashes each second indicating an ongoing

charging event. During charging, if a foreign object is detected, charging is aborted and the red LED will flash

each second indicating the fault detected, and will continue to do so until the receiver is removed from the target

zone. Similarly, any other detected error will also abort the charging process, indicated by a steady red LED that

remains lit until the receiver is taken away. Error conditions include communication errors between receiver and

transmitter, and detection of excess voltage, current, power, or temperature on the receiver or transmitter.

Absent an error, charging continues until the receiver indicates no further power is required, usually when an

attached battery is fully recharged. At this point, the transmitter enters the charge complete state, as indicated by

the green LED being lit steadily, which it continues to do until the receiver is removed from the transmitter.

Whenever the receiver is removed from the target area, the transmitter returns to the standby state, searching for

another transaction to begin.

Apply Power

Startup Sequence

Standby (ping…)

Charging

Charge Complete

if FOD

if Error

Receiver Removed

Blinking

Solid

Blinking

Solid

1/2 sec

Red

LED

Green

LED

- off -

User Guide Rev 2.0 www.semtech.com 5 of 27

TSDMTX-19V3-EVM May-18 Semtech

Standard Use

The TSDMTX-19V3-EVM is easy to set up and use. Use the power supply module and line cord that comes with

the EVM kit to apply power to the EVM via “J2”, the 19V power input jack. Once input power is provided, the

green LED should light for about a half-second and then turn off.

At this point, the EVM is ready to transmit power. A few times each second, the transmitter emits a ‘ping’ of

energy in search of a compliant receiver in range.

When receiver is in range (usually 4mm~6mm), the receiver is powered sufficiently during the ping-phase and is

able to announce its presence to the transmitter, and a transaction begins. The transmitter provides a small

amount of power to the newly discovered receiver, so receiver can tell the transmitter what its power

requirements are.

At the completion of the handshake, the transmitter begins providing the requested power, indicated by a

blinking green LED. During power transfer, the receiver continuously communicates with the transmitter, actively

directing the process. In this way, it is assured that power is only sent by how much it is required by an available

and desirous receiver – and in the way that is compatible to the requirements of the receiver. If required, a

receiver can actively increase or decrease its power request, and the transmitter will act accordingly. As such,

equipment with complex charging requirements can be precisely supported and only the desired amount of

power is provided.

Once charging is completed, the LED stops blinking and displays a steady green ‘completed’ state. If at any time

an error is detected, the red LED is lit and transmission is halted. To restart, the receiver must be removed from

the range of the transmitter and put back to the target zone to start a new transaction.

Productized Receiver Test

If you have a product that is Qi compliant, simply place it on the circular target of the black plastic antenna cover.

The transmitter should demonstrate the above actions, and the device receiving power should indicate it is taking

a charge in whatever manner its users guide states. You can also perform foreign object detection (FOD) by

following the steps in the “FOD Testing” section below.

User Guide Rev 2.0 www.semtech.com 6 of27

TSDMTX-19V3-EVM May-18 Semtech

EVM Receiver Tests

Additional testing can be performed with the use of an EVM receiver module. There are a number of Semtech

Receiver EVMs that support different power levels and output voltages, any of which can be used, as all support

the Qi standard and therefore are compatible with the TSDMTX-19V3-EVM transmitter. In this User Guide, the

TSDMRX-19V/20W-EVM has been selected as the receiver to experiment with. Other Semtech receiver EVMs

may be used instead in a similar manner; refer to the user guide for the selected receiver for details specific to the

selected device. Also, you can use phones which includes WPC wireless charging functions, like Samung phone S6

or above and Iphone 8 or above, to test TSDMTX-19V3-EVM.

In order to use the TSDMRX-19V/20W-EVM as a target receiver, simply place the receiver over the target circle on

the transmitter EVM module. You should see the LEDs on each EVM turn green, indicating a transaction has been

established. The EVM’s purpose is to receive power; next you can decide what to deliver that power to.

The user has a number of possible options to choose from. The optimal load to select would be a Programmable

DC Electronic Load. A ‘load box’ can easily be set to draw a selected current or power at the turn of a knob,

making them very flexible and easy to use in observing power supply operation in general. If a load box is not

available, a power resistor decade box is nearly as convenient, as it can easily be set to any desired resistance to

simulate a range of load conditions. In either case, please make sure the test load is rated for at least the amount

of power being tested. If need be, a selection of power resistors could be used as test loads, though without the

ease of modification of the prior options. Finally, any device that uses a 19 volt input up to 15 watts of power can

be used as a desired test load.

Whatever load is selected, wires must be run from the VOUT+ and GND pins of the receiver EVM to the selected

test load, as per the illustration below. Once the load is added, the receiver EVM can be used to perform a variety

of tests. Alternately, power can be drawn from the VBUS and GND lines of the USB port if desired.

Connect a DC voltmeter across the VOUT+ and GND pins to monitor the voltage being output to the load, and a

DC ammeter in series with the VOUT+ line. Set rating of those meters to allow for up to 19 volts and 1.1 amps to

be observed.

User Guide Rev 2.0 www.semtech.com 7 of 27

TSDMTX-19V3-EVM May-18 Semtech

No load being connected is also fine, place the receiver on the center of the transmitter target circle. Once

transmission begins, you should observe approximately 19 volts and 0 amperes on the meters.

Apply a variety of loads to observe performance at 5, 10, and 15 watt levels. Voltage should remain nearly

constant, and current should follow the P=V*I relationship. Experiment with the maximum power that can be

drawn before the receiver detects an overload and cuts off power. You should be able to observe on a minor

overload, the receiver will attempt to restore power by retesting the load intermittently. In the case of a major

overload, the transmitter may register an error, as indicated by a red LED on the transmitter, which will halt

further activity until the receiver is removed from the target area for several seconds before being placed back to

start a new transaction.

Observe Coil Signals

The following information is provided for reviewing how the EVM works in detail, as what can be observed below

is entirely managed by the Semtech TS80003 Wireless Controller. It allows the observer an opportunity to see

how the receiver and transmitter actively manage the wireless power process.

If you wish to observe the intrinsic wireless process, place an oscilloscope probe on one end of the antenna/coil,

with the probe ground connected to the board ground (one of the fastener screws will suffice). Be sure the scope

can handle signals up to 250 volts. While the EVM power supply is only 19 volts, the antenna is part of a resonant

circuit where considerably higher voltages is developed.

To observe the search ping, apply power to the transmitter and remove the receiver from the target zone. The

scope should display a ‘chirp’ of 0.5 to 1mSec in duration with an initial peak of 15 to 20 volts. The frequency

within the envelope of the chirp is in the 100-205 kHz range, which is the normal range of Qi systems.

Next, place the receiver on the transmitter target. With the scope set to 0.5 to 1 uSec and 10 to 20 volts per

division, you should observe a signal that is a composite of the sinusoidal power signal with a digital ‘notch’ in the

sinewave which is produced by the communication between the receiver and transmitter. Note as you vary the

load and the location of the receiver on the target that the amplitude and frequency of the coil signal changes.

The greater the load, the more signal is sent to transfer the power required by the load. Similarly, the less well

coupled the receiver antenna is to the transmitter coil, the more power must be sent to compensate for the

inefficient misalignment. You may note voltages near 140 volts peak-to-peak in the most demanding conditions.

User Guide Rev 2.0 www.semtech.com 8 of27

TSDMTX-19V3-EVM May-18 Semtech

Measure Efficiency

By measuring the power from the receiver’s VOUT+ and GND pins in comparison to the power entering the

transmitter EVM, you can calculate the efficiency of the power transfer through the system. For the EVMs used

here, the diagram below demonstrates that efficiency is a function of output current, and runs about 83% at

nominal power level (19V/1.0A), assuring good efficiency and minimal heat dissipation concerns.

Rx is Semtech TSDMRX-19V/20W-EVM which can support up to 20W load under normal condition.

10%

20%

30%

40%

50%

60%

70%

80%

90%

0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1

Efficency VS current

User Guide Rev 2.0 www.semtech.com 9 of 27

TSDMTX-19V3-EVM May-18 Semtech

Thermal Images Using TSDMRX-19V20W-EVM under 19V 20W condition

Operation ambient temperature: 26.5°C

Rx: 60.6°C Tx board: 54.1°C

Thermal Images Using TSDMRX-5V10W-EVM under 5V 10W condition

Rx board: 46°C Tx board:43°C

User Guide Rev 2.0 www.semtech.com 10 of27

TSDMTX-19V3-EVM May-18 Semtech

Firmware Management

The EVM is shipped with the latest released version of the firmware at the time it was manufactured. However, as

the standard evolves, or enhancements are made to the board performance, the firmware updates will be

available at https://www.semtech.com/power-management/wireless-charging-ics/wiireless-charging-evm-

firmware/index.html.

Equipments for FW update:

Device Qty.

TSDMTX-19V3-EVM 1

Semtech USB TO UART adapter 1

Semtech Wireless Power GUI software 1

GUI for TS80003 allows you install the latest firmware to your board, and also to interrogate the board as to which

version of the firmware is currently installed. Here is the link in the Semtech website to download TS8000X GUI

file, Docs& Resources item:

https://www.semtech.com/products/wireless-charging/linkcharge-ics/TS80003

The following sequence is for FW program:

1. Run WirelessPowerGUI_setup.exe file to any desired location on your computer, then you can find the

Semtech Wilreless Power GUI.

2. Make sure the 19V input is not connected.

User Guide Rev 2.0 www.semtech.com 11 of 27

TSDMTX-19V3-EVM May-18 Semtech

3. Connect the USB-to-UART adapter board to EVM board, and connect the adapter board to PC.

Figure 3 The wire connection of Semtech adapter and TS80003-based EVM

4. Run Wilreless Power GUI to start the user interface, click “Device”, choose “TS80003”.

Figure 4 Device selection in the GUI

User Guide Rev 2.0 www.semtech.com 12 of27

TSDMTX-19V3-EVM May-18 Semtech

5. Check if the status changes to “Connected”.

Figure 5 Status check in the GUI

6. If the status is connected, click “Firmware”, and then click the browse button.

Figure 6 Firmware upload window in the GUI

7. Choose the binary file, and click “Open”.

Figure 7 Firmware selection window in the GUI.

User Guide Rev 2.0 www.semtech.com 13 of 27

TSDMTX-19V3-EVM May-18 Semtech

8. Click “Program”, wait until the new window shows “Firmware is programmed successfully”. (The

programming process takes almost 20s.)

9. Close the GUI software, and then disconnect the USB-to-UART adapter board with EVM board.

User Guide Rev 2.0 www.semtech.com 14 of27

TSDMTX-19V3-EVM May-18 Semtech

FOD Test

In a production device, FOD testing is an important feature, in that the transmission process is constantly

inspected for the introduction of extraneous materials in the target area that could absorb the transmitted energy

and become hot. When Foreign Objects are Detected (“FOD”), the TS80003 shuts down power transmission as a

safety precaution, and indicates the detected problem by blinking the red status LED.

This process is bypassed in the receiver EVM, however, in order to allow engineers to test different antennas and

make other hardware modifications without triggering the FOD protocols and complicating the testing process.

When such hardware changes are made, the parameters of the feedback measurements change, which the FOD

protocol would perceive as a foreign object in the field, and cause the system to shut down.

In order to test the FOD protocol, the experimenter can use any Qi products certified to WPC 1.2.2 or higher as a

receiver. A list of such products can be found at:

http://www.wirelesspowerconsortium.com/products/?brand_name=&product_name=&type_number=&product_

type=2&compliant_automotive=&sort=&direction=asc

Experiments can be run on foreign objects on receivers with and without FOD management enabled to observe

the differences. With FOD disabled, the metal object in the field will absorb some of the transmitted energy and

become warm. Using a FOD-enabled production device, power transmission will be aborted when any significant

interference in power transfer has been detected.

Once a FOD abort takes place, the transaction is terminated, as indicated by a blinking red LED. To restart power

transmission, the receiver must be removed from the target area and a new transaction must be initiated. If the

FOD is still present, the transaction will fail again, and continue to do so until the FOD is removed from the target

area.

User Guide Rev 2.0 www.semtech.com 15 of 27

TSDMTX-19V3-EVM May-18 Semtech

Documentation

The following sections document the hardware design of the TSDMTX-19V3-EVM. This information can be used

to better understand the functionality of the design, as well as assist in creating your own hardware solution

based on this design.

A. Block Diagram

The TSDMTX-19V3-EVM may be divided into a number of sub-blocks as shown in the diagram below:

19 Volt Supply - the external ‘brick’ that converts AC power to 19 volts

5 Volt Buck – based on the TS30011, converts 19 vdc to 5 vdc

Controller – based on the TS80003 Wireless Power Controller. Includes I/O: USB, I2C, Temp Sensor, LED display

FET Driver – based on the TS61002 Full-bridge FET Driver, powers the FETs based on inputs from controller,

supply 3Vcc for Controller

Bridge FETs – gates drive power from the 19v supply to drive the resonant tank circuit (antenna)

Matching Network – array of capacitors to create the resonant tank along with the antenna

Antenna: Transmit – acts as the primary of an air-core transformer in conjunction with the receiver antenna.

Filters – adapt the antenna and drive values for use as feedback input to the controller, TS94033 as the current

amplifier.

User Guide Rev 2.0 www.semtech.com 16 of27

TSDMTX-19V3-EVM May-18 Semtech

B. Schematic

Below are the schematics for the TSDMTX-19V3-EVM. Annotation has been added to indicate which part of the

block diagram each component is a member of.

150

LEDG

1 2

3 4

150

LEDR

VCC 1

SDA/RX 2

SCL/TX 3I2C/UART

GND 4

68000-104HLF

PGND PGND

TP3

AC_PHASE

TP5

TP6

DC_VOLTAGE

DC_CURRENT

TP4

AC_V

TP2

AC_AMPL

TP1

AC_PEAK

100nF

10K

TEMP

AVCC

VCC3V

100nF

GND

AGND

600

DC_CURRENT

PWM1_H

PWM1_L

PWM2_H

PWM2_L

DC_VOLTAGE

PWM1_H

PWM1_L

PWM2_H

PWM2_L

100nF

4.7nF

1.0

LEDG

LEDR

DRV_EN

TEMP

DRV_EN

VCC3V

SCL_TXD

SDA_RXD

AC_PEAK

AC_AMPL

DC_VOLTAGE

DC_CURRENT

AC_V

AGND

AC_V

AC_AMPL

AC_PHASE

AVCC

AC_GAIN

AC_PHASE

SYNC1

47K

100K

R3 AC_GAIN

10K

SYNC2 SYNC2

4.7uF

6.3V

4.7uF

6.3V

PGND

TOUCH1/BST_VSET

TOUCH2

BUCK_H 33

TOUCH3

PWM2_L 29

BUCK_L 34

COIL_PHASE 2

SYNC1 25

MATCH_PHASE 3

AC_PHASE 8

AC_AMPL 10

AC_V 9

AC_PEAK 6

COIL_EN3 36

DC_I 5

DC_V 4

SYNC2 26

DRV_EN 18

COIL_EN1 28

COIL_EN2 35

AC_GAIN2 7

VDD

PWM2_H 30

BT_RX/SWDIO

PWM1_L 24

PWM1_H 23

AC_GAIN1 1

VSS

BT_TX/SWDCLK

I2C_SCL/RX

AVSS

AVDD

I2C_SDA/TX

LEDG 22

VDD

LEDR 17

LEDB 16

TEMP 12

BATT_V 11

BST_L

PAD

TS80003

J1: Pin 2 is connected to TX of PC; Pin 3 is connected to RX of PC

R0 AC_VTPC1

TPC2

User Guide Rev 2.0 www.semtech.com 17 of 27

TSDMTX-19V3-EVM May-18 Semtech

TP10

GND

TP9

PGND

VCCIN

TIE1

PGNDGND

TP8

VCC5V

TP7

VCCIN

VSW 1

VCC

GND 4

FB 5

8EN

BST 10

VCC

VSW 12

VSW 13

PGND 14

PGND 15

VSW 16

PAD 17

TS30011-M000QFNR

47nF

C11

VCC5V

4.7uH

VCCIN

PGND

FET Driver supply

10K

R10

PGND

47K

TIE2

GND AGND

100nF

50V

C10

10uF

25V

C12

22uF

25V

22uF

6.3V

C13

22uF

6.3V

C14

VDIODES

COIL

AC_PEAK

100K

R29

1.5K

R30

100nF

C48

AGND AGND

AC_PEAK

1nF

150V

C49

7.5K

R28

AGND

75K

R31

10K

R32

4.7nF

C50

DC_VOLTAGE

AGND AGND

DC_VOLTAGE

1uF

C52

R33

100nF

C53

DC_CURRENT

DC_I+

DC_I-

VSS 4

VDD 5

INP

INM

6OUT 8

VOS_REF

VDDR 3

TS94033

DRV_EN

10nF

10V

C51

AGND

10nF

10V

C54

AGND

200K

R26

4.7nF

150V

C46 7.5K

R25

7.5K

R27

33pF

C47

AVCC

BAT54SW-7-F

VCC3V

VSENSE

AGND AGND AGND

VSENSE

AVCC

VDIODES

Place close to the TS80003.

Place close to the TS61002.

Maintain clearances to other circuits.

High Voltage.

R35

VCCIN

User Guide Rev 2.0 www.semtech.com 18 of27

TSDMTX-19V3-EVM May-18 Semtech

R12

R15

100nF

50V

C20

PGND

SW1

R19

R23

100nF

50V

C28

PGND

SW2

R13

R21

TP12

TP13

VBRIDGE

SW1

SW2

2.2nF

50V

C25

PGND

2.2nF

50V

C23

2.2nF

50V

C38

PGND

2.2nF

50V

C31

47nF

C37

47nF

C24

PGND

VS1 1

HO1 2

LO1 3

VCCG

PGND 5

LO2 6

HO2 7

VS2 8

VB2 9

LS1ON

10 HS1ON

LS2ON

AGND

VOUTA

LDO_EN

VLDO

HS2ON

SYNC1

VIN

VOUTB

GAIN

24 SYNC2

DRV_EN

VB1 28

PAD 29

TS61002

4.7uF

6.3V

C42

10uF

16V

C40

100nF

10V

C41

PGND

DRV_EN

PGND

PWM1_H

PWM1_L

PWM2_H

PWM2_L

2.0

R22

PGND

2.7nF

50V

C39

2.0

R14

PGND

2.7nF

50V

C26

SYNC1

AC_GAIN

AC_V AC_V

AC_AMPL

AC_PHASE

AGND AGND

47pF

C36

100K

R18

AC_AMPL

AC_PHASE

100K

R20

220pF

C45

10nF

C44

100K

R24

1nF

150V

C43

AC_AMPL

22uF

25V

C21

22uF

25V

C22

22uF

25V

C29

22uF

25V

C30

VSENSE VSENSE

VCC3V

VCC5V

COIL COIL

C34

47nF

200V

C32

47nF

200V

C33

C35

TEMP

2COIL

24uH

2Therm

Coil Thermistor

PGND

VDIODES

High Voltage.

SYNC2

100K

R17

47pF

C27

7.5K

R16

Place pin 19 close to the TS80003.

Supported coils:

A10, MP-A1 (19V)

Other coils are supported.

Each coil needs special configurations in FW.

The resonant capacitors(C32C35) need to be tuned to match the coil.

100nF

50V

C19

0.020

R11

VBRIDGE

PGND

DC_I+

DC_I-

22V

100nF

50V

C18

VCCIN

TIE4TIE3

22uF

25V

C15

22uF

25V

C16

22uF

25V

C17

PGND

TP11

VBRIDGE

Use a current sense resistor with a low temperature coefficient.

Connect the current-sense amplifier using Kelvin connections

directly to the resistor pads.

Do not allow high current to flow through the Kelvin connections.

2, 3, 4

Q1A

BSC0993ND

5, 6, 7

Q1B

BSC0993ND

2, 3, 4

Q2A

BSC0993ND

5, 6, 7

Q2B

BSC0993ND

User Guide Rev 2.0 www.semtech.com 19 of 27

TSDMTX-19V3-EVM May-18 Semtech

C. Bill Of Materials “BOM”

Below is a list of the parts used in the TSDMTX-19V3-EVM. An excel spreadsheet file with this information is

available on the Semtech website as an additional convenience.

Item Designator Qt. ManufacturerCode Footprint Description Manufacturer

1 C1, C5, C42 3 0603 0603 4.7uF 6.3V

2 C10, C18, C19 3 0402 0402 100nF 50V

3 C11, C24, C37 3 0402 0402 47nF 25V

4 C12 1 0805 0805 10uF 25V

5 C13, C14 2 JMK316B7226ML-T 1206 1206 22uF 6.3V X7R Tayio Yuden

C2, C3, C4, C6,

C8, C41, C48,

C53

8 0402 0402 100nF 10V

7 C20, C28 2 0603 0603 100nF 50V

8 C26, C39 2 0805 0805 2.7nF 50V Yageo

9 C27 1 0402 0402 47pF 10V

10 C32, C33 2 C1210C473J2GACAUTO 1210 1210 47nF 200V C0G Kemet

11 C40 1 0805 0805 10uF 16V

12 C43, C49 2 1206 1206 1nF 150V

13 C44, C51, C54 3 0402 0402 10nF 10V

14 C45 1 0402 0402 220pF 10V

15 C46 1 1206 1206 4.7nF 150V

16 C47 1 0402 0402 33pF 10V

17 C52 1 0402 0402 1uF 10V

18 C7, C50 2 0402 0402 4.7nF 10V

C9, C15, C16,

C17, C21, C22,

C29, C30

8 CL32B226KAJNFNE 1210 1210 22uF 25V X7R Samsung

20 D1 1 APHB1608ZGSURKC APHB1608 LED Dual Color Kingbright

21 D3 1 BAT54SW-7-F SOT323-3N Schottky Diode Zetex

22 D4 1 BAS101S,215 SOT23-3N Diode NXP

23 J2 1 PJ-014DH-SMT CON_PWR Low Voltage Power Supply Connector CUI

24 J4 1 760308110 Coil 24uH±10% 6A, Q=180, Typ. RDC=0.07ohm Wurth Electronics

25 L1 1 BLM18AG601SN1D 0603 0603 600R Beads Murata

26 L2 1 MLP2012S4R7M 0805 0805 4.7uH QFN8-INF TDK

27 Q1, Q2 2 BSC0993ND QFN8-INF DUAL MOSFET

28 R0, R12, R15,

R19, R23 5 0402 0402 0R

29 R1, R13, R21 3 0402 0402 1R

30 R11 1 WSL0603R0200FEA 0805 0805 0R02 1% 75PPM/C Vishay

31 R14, R22 2 0805 0805 2R

32 R16, R25, R27 3 0402 0402 7K5

33 R2, R9 2 0402 0402 47K

34 R26 1 0603 0603 200K

35 R28 1 0603 0603 7K5

36 R29 1 0805 0805 100K

37 R3, R17, R20,

R24 4 0402 0402 100K

38 R30 1 0402 0402 1K5

39 R31 1 0402 0402 75K

40 R33 1 0402 0402 1K

41 R35 1 0402 0402 10R

42 R6, R10, R32 3 0402 0402 10K

43 R7, R8 2 0402 0402 150R

44 U1 1 TS80003 VQFN TS80003 PG-VQFN-40-17 Semtech

45 U2 1 TS30011-M000QFNR QFN

Current-Mode Synchronous Buck DC/DC Converter

Semtech

46 U3 1 TS61002 QFN Full-Bridge FET driver Semtech

47 U4 1 TS94033SKTRC SC70-8N Current Sense Amplifier Semtech

User Guide Rev 2.0 www.semtech.com 20 of27

TSDMTX-19V3-EVM May-18 Semtech

Tx coil Specifications:

Vendor Part Number Inductance

DCR(typ.) Dimension

Wurth Electronics 760308110 24uH 0.07Ω 53.3mmX53.3mm

Attention:

1. Resonance capacitors (C32,C33) should be COG capacitor, it should any Qi products certified to WPC

1.2.2 or higher as a receiver;

2. Current sense resistor (R11) should be 1% 75PPM/C or better.

Coil size 53mmX53mm

TSDMRX-19V20W-EVM coil specification:

Vendor Part Number Inductance

DCR(typ.) Dimension

ABRACON AWCCA-RX350300-101 25uH±10% 0.15Ω Ø35.00x3.15mm

User Guide Rev 2.0 www.semtech.com 21 of 27

TSDMTX-19V3-EVM May-18 Semtech

D. Board Layout

The diagram below shows the locations of the components used in the TSDMTX-19V3-EVM PCB.

E. Board Layers

The TSDMTX-19V3-EVM PCB is based on a four layer design as shown below. The ground plane in layer two is

recommended to reduce noise and signal crosstalk. All components are placed on the top of the board for easier

evaluation of the system. End product versions of this design can be made significantly smaller by distributing

components on both sides of the board. The Gerber files for this artwork can be downloaded from the Semtech

web page.

User Guide Rev 2.0 www.semtech.com 22 of27

TSDMTX-19V3-EVM May-18 Semtech

Top Layer

Ground Plane

User Guide Rev 2.0 www.semtech.com 23 of 27

TSDMTX-19V3-EVM May-18 Semtech

Signal Layer

Bottom Layer

Attention:

Connect the current-sense amplifer using Kelvin connections directly to the Current sense resistor pads,

and DO NOT allow high current to flow through the Kelvin connections. It is an example for the layout.

User Guide Rev 2.0 www.semtech.com 24 of27

TSDMTX-19V3-EVM May-18 Semtech

User Guide Rev 2.0 www.semtech.com 25 of 27

TSDMTX-19V3-EVM May-18 Semtech

FAQs

Q: What output voltage is provided by the TSDMTX-19V3-EVM system?

A: It depends on which receiver is being used. For the TSDMRX-19V/20W-EVM, the output would be 19 volts, at

up to 20 watts total power. If the TSDMRX-5W-EVM was used, the output would be 5 volts, at up to 5 watts.

Q: Where can I find more information on the Qi standards?

A: There are a number of websites that address this subject. A good starting point for Qi would be:

http://www.wirelesspowerconsortium.com/technology/how-it-works.html.

Q: Does the EVM part number represent something in particular?

A: Yes. The part number is broken into a prefix, main body, and suffix, separated by dashes. The prefix is

comprised of three two letter groupings that each help define the product represented. As such, the part number

can be read as follows:

Therefore, the TSDMTX-19V3-EVM is a Dual Mode, 19 volt Transmitter Evaluation Module provided by Semtech.

Q: What if my questions weren’t answered here?

A: Please visit the Semtech website as described on the next page. An updated FAQ for the TSDMTX-19V3-EVM is

maintained there and may contain the answers you’re looking for. Your local Semtech FAE can also assist in

answering your questions.

Prefix characters:

1+2 = Company : TS = Triune/Semtech

3+4 = Environment : DM = Dual Mode WI = Wearable Infrastructure

5+6 = Type : TX = Transmit RX = Receive

Mid-section = Device Voltage and/or Wattage

Suffix = Equipment type:

EVM = Evaluation Module

MOD = Production Module

User Guide Rev 2.0 www.semtech.com 26 of27

TSDMTX-19V3-EVM May-18 Semtech

Next Steps

For more information on Wireless Power, go to the Semtech webpage at:

https://www.semtech.com/power-management/wireless-charging-ics/

You may also scan the bar code to the right to go to the above web page:

There you can find the downloadable copies of the schematic, BOM, and board artwork, as well as additional

information on how to obtain Semtech wireless power products, from the chip level all the way to complete board

modules, as your needs require.

User Guide Rev 2.0 www.semtech.com 27 of 27

TSDMTX-19V3-EVM May-18 Semtech

IMPORTANT NOTICE

Information relating to this product and the application or design described herein is believed to be reliable, however

such information is provided as a guide only and Semtech assumes no liability for any errors in this document, or for

the application or design described herein. Semtech the latest relevant information before placing orders and should

verify that such information is current and complete. Semtech reserves the right to make changes to the product or

this document at any time without notice. Buyers should obtain warrants performance of its products to the

specifications applicable at the time of sale, and all sales are made in accordance with Semtech’s standard terms

and conditions of sale.

SEMTECH PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE

IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS, OR IN NUCLEAR APPLICATIONS IN WHICH THE

FAILURE COULD BE REASONABLY EXPECTED TO RESULT IN PERSONAL INJURY, LOSS OF LIFE OR SEVERE

PROPERTY OR ENVIRONMENTAL DAMAGE. INCLUSION OF SEMTECH PRODUCTS IN SUCH APPLICATIONS IS

UNDERSTOOD TO BE UNDERTAKEN SOLELY AT THE CUSTOMER’S OWN RISK. Should a customer purchase or use

Semtech products for any such unauthorized application, the customer shall indemnify and hold Semtech and its

officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs damages and attorney

fees which could arise.

The Semtech name and logo are registered trademarks of the Semtech Corporation. All other trademarks and trade

names mentioned may be marks and names of Semtech or their respective companies. Semtech reserves the right to

make changes to, or discontinue any products described in this document without further notice. Semtech makes no

warranty, representation or guarantee, express or implied, regarding the suitability of its products for any particular

Contact Information

Semtech Corporation

200 Flynn Road, Camarillo, CA 93012

Phone: (805) 498-2111, Fax: (805) 498-3804