Se QTLP600CEB_7772D Features Hf Miniature footprint - 1.6(L) X 0.8(W) X 0.8(H) mm I Wide viewing angle of 100 i Water clear optics Hf Moisture-proof packaging ter reel; 10,000 units per reel Hf Available in 0.315" (8mm) width tape on 13" (330mm) diame- March 2005 Surface Mount LED Lamp, 0603 (0.8 mm Height) Applications li Keypad backlighting @ Push-button backlighting Hf LCD backlighting Description This surface mount chip LED is designed to fit industry standard footprint. Small size, low profile and wide viewing angle make this LED an ideal choice for backlighting applications and panel illumination. This device utilizes an InGaN/Sapphire blue LED. Package Dimensions | | Sass 0.035 (0.9) i [ 0.028 (0.7) i | t TOP + 0.047 (1.2) [- 0.031 (0.8) 0.012 (0.3) To SIDE 0.039 (1.0) rT BOTTOM CATHODE MARK +o - POLARITY NOTE: Dimensions for all drawings are in inches (mm). Tolerance is +0.1mm unless specified. 2004 Fairchild Semiconductor Corporation QTLP600CEB_7772D Rev. 1.0.0 www fairchildsemi.com Q4yBieH wu go) 090 dwe7 G37 JUNO] eoRJing GZZZ/ G439009d 1LOAbsolute Maximum Ratings (T, = 25C unless otherwise specified) Parameter Symbol Rating Unit Operating Temperature Topr -40 to +85 C Storage Temperature TstG -40 to +90 RG Lead Soldering Time Tso. 260 for 5 sec C Continuous Forward Current IF 30 mA Peak Forward Current len 100 mA (f= 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Vr 5 Vv Power Dissipation Pp 80 mW Electrical/Optical Characteristics (T, =25C) Part Number QTLP600CEB_7772D Condition Luminous Intensity (med) Ip =5mA Bin I1 8-16 Bin |2 13-26 Forward Voltage (V} lp =5mA Bin v1 2.75 - 2.95 Bin V2 2.95 - 3.15 Dominant Wavelength (nm) IF =5mA Bin W1 465 - 470 Bin W2 470-475 Spectral Line Half Width (nm) 35 lp =5mA Viewing Angle () 100 lp =5mA Bin code |1 corresponds to the intensity range of 8 to 16 med. Bin code |2 corresponds to the intensity range of 13 to 26 mcd. Bin code V1 corresponds to the forward voltage range of 2.75 to 2.95 V. Bin code V2 corresponds to the forward voltage range of 2.95 to 3.15 V. Bin code W1 corresponds to the dominant wavelength range of 465 to 470 nm. Bin code W2 corresponds to the dominant wavelength range of 470 to 475 nm. QTLP600CEB_7772D Rev. 1.0.0 www fairchildsemi.com (JyBia}H Ww go) 090 dwe7] Gy] }UNoW eeejns GZZZZ G4D009d ILOTypical Performance Curves Fig. 1 Forward Current vs. Forward Voltage Ie - FORWARD CURRENT (mA) 1.0 20 3.0 40 5.0 Ve - FORWARD VOLTAGE (V) RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) 2.0 05 0.0 Fig. 2 Relative Luminous Intensity vs. DC Forward Current a ra | | 5 10 15 20 25 30 Ir - DC FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength 05 RELATIVE INTENSITY 300 350 400 450 Fig. 4 Radiation Diagram LORS TER RSS gol FKP PETER UT See o2 0 OF an" to 08 06 04 REL. LUMINOUS INTENSITY (%) 90 O4 06 08 10 500 650 WAVELENGTH (nm) Ip - FORWARD CURRENT (mA) 50 40 30 20 600 650 700 750 Fig. 5 Maximum Forward Current vs. Ambient Temperature IN 0 20 40 60 a0 100 Ta - AMBIENT TEMPERATURE (C) QTLP600CEB_7772D Rev. 1.0.0 www fairchildsemicom (JYy6i9}H Ww gO) E090 dwe7] G37 JUNOW eoRJINS GzZZZZ G49009d 1LORecommended Printed Circuit Board Pattern 0.031 (0.80) 0.033 (0.85) 0.031 (0.80) 0.039 (1.00) Recommended IR Reflow Soldering Profile 260 GC MAX +5 Cis MAX 120 sec Max Preheating 180 200C 5 sec MAX soldering time -6 Cis MAX 1-5 CiSec QTLP600CEB_7772D Rev. 1.0.0 www fairchildsemicom (JYy6i9}H Ww gO) E090 dwe7] G37 JUNOW eoRJINS GzZZZZ G49009d 1LOTape and Reel Dimensions @13.5 40.5 Progressive direction r 1.75 OLFO LOLS OL ODEES @1.55.+05 : 3,540.05 8.0 Polarity ienaler 34823 ngle: + 0. Unit: mm P 1.9+0.1 13.5415 M17.541.5 P 0.2310.1 Oo Dimensional tolerance is + 0.1mm unless otherwise specified QTLP600CEB_7772D Rev. 1.0.0 www fairchildsemicom (JYy6i9}H Ww gO) E090 dwe7] G37 JUNOW eoRJINS GzZZZZ G49009d 1LOTRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx FAST IntelliMAX POP SPM ActiveArray = FASTr ISOPLANAR Power247 Stealth Bottomless FPS LittleFET PowerEdge SuperFET CoolFET FRFET MICROCOUPLER PowerSaver SuperSOT-3 CROSSVOLT GlobalOptoisolator MicroFET PowerTrench SuperSOT-6 DOME GTo MicroPak QFET SuperSOT-8 EcoSPARK = HiSeC MICROWIRE Qs SyncFET E?CMOS ko MSX QT Optoelectronics TinyLogic EnSigna i-Lo MSXPro Quiet Series TINYOPTO FACT ImpliedDisconnect OCX RapidContigure TruTranslation FACT Quiet Series OCXPro RapidGonnect UHC Across the board. Around the world. OPTOLOGIC uSerDes UltraFET The Power Franchise OPTOPLANAR SILENT SWITCHER = UniFET PACMAN SMART START CX Programmable Active Droop DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TOANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUMEANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDERITS PATENT RIGHTS, NOR THE RIGHTS CF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical implant into the bedy, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (JYy6i9}H Ww gO) E090 dwe7] G37 JUNOW eoRJINS GzZZZZ G49009d 1LO reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Formative or In Design Advance Information This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Raw. 16 6 www fairchildsemi.com QTLP600CEB_7772D Rev. 1.0.0