WR 3M – High-End Rework
2
3
Content
WR 3M – Innovation newly designed 4-9
The WR 3M 6
Accessories 8
Technical data 8
Scope of delivery 9
Weller Flexibility. 10-13
Refer to the matrix to make your choice of connecting tools for the WR 3M.
Hot Air Nozzles 14-15
For hot air pencil HAP 1 and HAP 200
Nozzles 16
For DSX 80, DSXV 80, DXV 80
Soldering Tips 17-22
Plug-in adjusted soldering tip set for WMRT 17
Soldering tips for WMRP
18
Soldering tips for WSP 80, WSP 80FE, WP 80 and MPR 80 19-20
SMT soldering tip for reworks on SMT components 20
Soldering tips for micro soldering pencil WMP 21
Soldering tips for soldering iron WSP 150 22
Accessories 23
Additional Safety Rests 24-25
Matrix 26
Make your choice of connecting tools.
3 tool channels
with automatic tool
detection
Large LCD display
Own vacuum channel
for pick-up
USB port
Innovative special
functions
Comprehensive
PC software
All High-Speed
Micro-Tools can be
connected
New powerful hot-air
pencil
WR 3M – Innovation newly designed
6
WR 3M – Rework on high
New Design
Weller has developed a new design of repair
station to the highest level: the WR 3M.
The versatile repair station is specifically
tailored to the needs and requirements of pro-
fessional repairs to latest-technology electronic
sub-assemblies in industrial production engi-
neering and in the repair and laboratory fields.
3 independent tool channels
with automatic tool detection guarantee the
simultaneous operation of 3 soldering tools.
Precise temperature control performance at
the soldering tip is guaranteed by the digital
control electrotechnology together with su-
perior-quality sensor and heat-transfer techno-
logy. High-speed measured-value acquisition
provides for maximum temperature precision
and optimum dynamic temperature perfor-
mance in load situations.
est level
High-Speed Micro Tools
All Weller High-Speed Micro Tools such as the
WMRP micro soldering bit and the WMRT
micro desoldering tweezers can be connected.
But also extremely powerful bits, such as
the new HAP 200 hot-air pencil, can be easily
connected.
The HAP 200 provides a directional hot air
flow that is adjustable. Electronic temperature
control from 50°C to 550°C. Different nozzles
available as accessory. Finger switch controls
adjustable pump. (For use with WR 3M only.)
Hot-air pencil HAP 200
HAP 200 Hor air pencil
WP 80 Soldering Iron, 80 W / 24 V
WRK Set
WVP
Accessories
The newly developed, innovative desoldering
system facilitates soldering and desoldering
of large SMT components up to 30 x 30 mm.
The desoldering system can be connected
to the additional vacuum channel (pick up) of
the WR 3M.
USB port
The WR 3M is equipped with a mini USB port.
The extensive PC software supplied can be
used to update the software on the control
unit. Monitor software for monitoring, para-
meterising and data logging is included in
the software package.
Operation simplicity
The big LCD display allows clear information
and simple handling.
Innovative special functions such as automatic
channel changing, temperature preselection
buttons for each channel, Factory Calibration
Check.
Components can be easily and safely moved
with the aid of the WVP vacuum pipette.
The housing is antistatic and the vacuum
nipples are available in 2 different sizes. The
desoldering system can be connected to
the additional vacuum channel (pick up) of
the WR 3M.
DSX 80 Desoldering Iron 80 W / 24 V
9
WR 3M scope of delivery
Technical data
Order No. 005 33 666 99
WR 3M repair station
Adapter for HAP 200 hot-air pencil
CD with USB software
USB cable
Dimensions: L x W x H (mm): 237 x 235 x 102
Weight: approx. 6.7 kg
Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz)
Power consumption: 420 W
Safety class: I and III, housing antistatic
Fuse: Overcurrent release 2 A (4 A)
Temperature control Soldering and Desoldering iron stepless
of channels: 50°C – 550°C (150°F – 999°F)
Controllable temperature range is
tool-dependent
Temperature accuracy: ± 9°C (± 17°F)
Temperature stability: ± 2°C (± 4°F)
Pump
(periodic duty (30/30) s): Max. vacuum 0.7 bar
Max. delivery rate 18 l/min
Hot air max. 15 l/min
Additional Pump: Max. vacuum 0.5 bar
Max. delivery rate 1.7 l/min
Equipotential bonding: Via 3.5 mm pawl socket
on back of device
Order No. 005 33 686 99
WR 3M
HAP 200 Hot-air pencil with WDH 30 Safety rest
DSX 80 Desoldering iron with WDH 30 Safety rest
WP 80 Soldering iron with WDH 10 Stop + go Safety rest
WVP Vacuum pick up
WDC 2 Dry cleaner
Version with Inline Desoldering iron
Order No. 005 33 683 99
HAP 200 hot-air pencil and WDH 30 Safety rest
DXV 80 desoldering iron with WDH 40 Safety rest
WP 80 Soldering Iron with WDH 10 Stop + Go Safety rest
WVP Vacuum pick up
WDC 2 Dry cleaner
Mains Cable Standard (F) and UK (G)
WR 3000M set scope of delivery
DXV 80 Desoldering Iron 80 W / 24 V
10
Weller Flexibility
Refer to the matrix to make your choice of connecting tools for the WR 3M.
(See Matrix page 26)
HAP 1 Hot air pencil set
DSX 80 Desoldering iron and service kit
DXV 80 Inline desoldering set
The HAP 1, 100 W/24 V, provides a directional hot airflow that is
adjustable and static-free. Electronically temperature controlled from
50˚C to 550˚C. Different nozzles available as accessories. Finger switch
controls speed adjustable pump. Hot air pencil set, consisting of
HAP 1 with finger switch, WDH 30 Safety rest for pencil, nozzle 1,2
and 3,0 mm, key and nutdriver for nozzle changing.
An 80 W/24 V desoldering iron for electronics rework. Electronically
temperature controlled. Micro-finger switch controls quick-start, fast
action vacuum pump. Different interchangeable tiplets, plus several
CSF devices are available as accessories. DSX 80 set, consisting of
DSX 80 Desoldering iron, WDH 30 Safety rest, cleaning tool, glass
collector, two desoldering nozzles, gasbet, anti-bloc paste, filter.
Connectable to all 80 W desoldering stations. Handle utilizes the
nonreturnable tin collector to hold the extracted solder. Use off thred
less DX nozzles. DXV 80 set, consisting of DXV 80 Desoldering iron,
and WDH 40 Safety rest for iron.
HAP 1
005 33 114 99
HAP 200 Hot air pencil set
The HAP 200, 200 W/24 V, provides a directional hot airflow that is
adjustable and static-free. Electronically temperature controlled from
50°C to 550°C. Different nozzles available as accessories. Finger
switch controls speed adjustable pump. Hot air pencil set, consisting
of HAP 200 with finger switch, WDH 30 Safety rest for pencil,
nozzle 1,2 mm and 3,0 mm, key and nutdriver for nozzle changing.
HAP 200
005 27 117 99
DSX 80
005 33 138 99
DXV 80
005 13 181 99
WMRP Soldering pencil set for RT soldering tips WP 80 Micro Soldering pencil set
The 80 W micro soldering pencil WP 80 persuades with its short tip-
to-grip design, being of big advantage for work under microscopes.
The distance from grip to the tip is 40 mm only. WP 80 set, consisting
of WP 80 soldering pencil and WDH 10 Safety rest.
WP 80
005 29 181 99
WMRP
005 29 171 99
The RT soldering tips have an extremely short heat-up time. All com-
ponent parts of the system, such as the sensor and heating element,
are designed for optimum heat transfer. This ensures absolute efficiency
in the utilization of the power provided by the supply unit. The recovery
time is minimized. Changing soldering tips is quick, easy, and, most
importantly, requires no tools. WMRP set, consisting of WMRP soldering
pencil, RT 3 soldering tip and WDH 50 Safety rest.
LR 82 Soldering iron set
An 80 W/24 V soldering iron for high mass soldering. Dual sensor,
electronically temperature controlled. LR 82 set, consisting of LR 82
Soldering iron, WDH 30 Safety rest for iron.
LR 82
005 33 113 99
The 65 W micro pencil is up to the task with superior performance
for both heat-up and thermal efficiency. Suitable to handle all micro
components and fine pitch tasks. The WMP provides an extremely
short tip-to-grip distance. The heater is integrated into the handle.
When the tip wear out the heating element goes on. WMP set
consisting of WMP micro soldering pencil and WDH 20T Safety rest
with Stop + Go function for WMP.
WMP Micro soldering pencil set
WMP
005 33 153 99
WSP 80 Micro soldering pencil set
A micro soldering pencil, 80 W/24 V. This soldering pencil can be uni-
versally used in all situations from extremely delicate soldering to
those where there is a greater temperature requirement. WSP 80 set,
consisting of WSP 80 Micro soldering pencil with WDH 10 Safety rest.
WSP 80
005 33 125 99
11
WSP 150 Soldering iron set
The WSP 150, 150 W/24 V, soldering iron was specially developed for
soldering tasks with extremely high heat requirements. The 150 W
heater power combined with optimal transfer of heat to the soldering
iron bit guarantees the high performance capability of the soldering
iron. WSP 150 set, consisting of WSP 150 Soldering iron, WDH 30
Safety rest for iron.
WSP 150
005 33 135 99
LR 21
005 33 112 99
LR 21 Soldering pencil set
Electronically temperature controlled 50 W/24 V soldering pencil.
LR 21 set, consisting of LR 21 Soldering pencil, WDH 30 Safety rest
for pencil.
An 80 W Antistatic Peritronic soldering pencil that gives all-round
vision when making intricate connections. Antistatic cord and handle.
Electronically temperature controlled. Consists of MPR 80 Peritronic
soldering iron and KH 25P Safety rest.
MPR 80 Peritronic soldering pencil set
MPR 80
005 33 131 99
12
The WST 20, 50 W/24 V, copes with all known thermo-elastic plastics.
Adjustable for a stripping length up to 30 mm. Additional blades avail-
able for stripping flat cables and shrinking.
The WST 82 is the 80 W version of the WST 20. Adjustable for a strip-
ping length up to 30 mm. Additional blades available for stripping flat
cables and shrinking.
The tweezers are used to desolder SMD components. The tweezers
have two moveable heating elements. WTA 50 set, consisting of WTA
50 Tweezer, AK 51 Safety rest for Tweezers.
WST 20 Thermal wire stripper with Safety rest
WTA 50 Tweezers
WSB 80 Solder bath WSB 150 Solder bath
WST 82 Thermal wire stripper with Safety rest
The WSB 80 is a very useful rework preparation tool. The solder bath
is temperature controlled continuously from 50˚C to 450˚C via an
existing 80 W power source. The solder bath can be used to tin wire
ends and clean leads of all extraneous solder particles in preparation
for reworking. (Usable for lead free solder.)
WST 20
005 25 030 99
The new WMRT desoldering tweezers 80 W/24 V enable with their
twin parallel adjusted tiplets a significant precise and desoldering of
very small SMD components. Placed in the Safety rest WMRTH the
tips are automatically switched off for increasing endurance.
WMRT Tweezers
WMRT
005 13 173 99
WSB 150
005 27 042 99
WSB 80
005 27 040 99
WTA 50
005 33 133 99
The WSB 150 solder bath is optimally suited to tin coating and
preparation of soldering components. It has a temperature range of
50°C – 550°C with heat output of 150 W. To guard against dripping
solder residue, the solder bath is placed in a V2A tray, supplied as
an optional extra. (Usable for lead free solder.)
Weller Flexibility
Refer to the matrix to make your choice of connecting tools for the WR 3M.
(See Matrix page 24)
WST 82
005 25 031 99
WHP 80 (80 W/24 V) Preheating plate
WHP 80
005 27 08 99
With a heating surface of 80 x 50 mm, they preheat IC boards prior to
micro rework.
13
Innovative desoldering system to solder and desolder SMD
components up to the size of 30 x 30 mm.
Vacuum pick-up for easy manually handling of SMD components.
The housing is antistatic. The vacuum nipples are available in two
different sizes.
WRK Chip Removal kit
WVP Vacuum Pick-Up
WVP Vacuum pick-up
005 29 184 99
WRK Chip kit
005 15 155 99
x
y
Description Dimensions (mm) Type Order No.
x y
Hot air nozzle 18,0 x 18,0 Q 10 005 87 277 85
four sides heated 16,0 x 16,0 SK 769B 005 87 278 16
with hot plate 12,0 x 12,0 SK 709 005 87 278 12
Hot air nozzle 12,5 x 15,0 Q 08 005 87 277 83
four sides heated
with hot plate
Hot air nozzle 15,0 x 10,0 Q 06 005 87 277 80
four sides heated
with hot plate
Hot air nozzle 6,0 x 9,0 Q 04 005 87 277 78
four sides heated
with hot plate
Hot air nozzle 6,0 x 6,5 Q 02 005 87 277 77
four sides heated
with hot plate
Hot air nozzles 10,0 x 18,0 D 10 005 87 277 84
two sides heated
with hot plate
Hot air nozzle 15,0 x 10,0 D 08 005 87 277 81
two sides heated
with hot plate
Hot air nozzle 10,0 x 13,0 D 06 005 87 277 82
two sides heated
with hot plate
Hot air nozzle 10,5 x 10,5 D 04 005 87 277 79
two sides heated
with hot plate
Measuring nozzle – R 01 005 87 278 08
for thermo element
Ø 0,5 mm
Hot Air Nozzles
for hot air pencil HAP 1 and HAP 200
14
Adapter
Order No.
005 87 617 28
Hot Air Nozzles
for hot air pencil HAP 1 and HAP 200
x
y
Description Dimensions (mm) Type Order No.
x y
Flat nozzle 12,0 x 1,5 F 06 005 87 277 72
Flat nozzle 10,5 x 1,5 F 04 005 87 277 73
Flat nozzle 8,0 x 1,5 F 02 005 87 277 74
Round nozzle Ø 2,0 R 10 005 87 277 87
long straight
Round nozzle Ø 2,0 R 08 005 87 277 86
long bent
Round nozzle Ø 3,0 R 06 005 87 278 22
Round nozzle Ø 1,2 R 04 005 87 278 21
Round nozzle Ø 0,8 R 02 005 87 278 23
Dual nozzle Ø 1,5 x 10,0 FD 4 005 87 277 75
Dual nozzle Ø 1,5 x 8,0 FD 2 005 87 277 76
15
Adapter
Order No.
005 87 617 28
Nozzles
16
Model Description mm mm mm Order No.
DX110 Nozzle 1,9 0,7 23 005 13 140 00
DX111 Nozzle 2,5 0,7 23 005 13 141 00
DX112 Nozzle 2,3 1,0 23 005 13 142 00
DX113 Nozzle 2,5 1,2 23 005 13 143 00
DX113HM Nozzle 2,5 1,2 23 005 13 150 00
with improved thermal transfer
DX114 Nozzle 3,3 1,8 23 005 13 144 00
DX115 Nozzle 1,9 0,7 23 005 13 145 00
DX116 Nozzle 2,7 1,2 29 005 13 146 00
DX117 Nozzle 2,9 1,5 23 005 13 147 00
DX118 Nozzle 1.5 0.7 23 005 13 148 00
DX119 Needle Tiplet 1,1 0,7 31 005 13 151 00
with not wettable stainless steel tube for removal of solder bridges in connection with hot air pencil
DX120 Nozzle 2,5 1,1 22 005 13 152 00
without inside tube, for cleaning of SMD pads
DX Measuring 3,3 0,55 21,5 005 13 153 99
Nozzle for temperature measurement with thermocouple 0.5
Conus insert cleaning tool 005 87 067 94
DX Nozzle Set DX 110-DX115 005 13 790 99
Threadless nozzles for desoldering iron
DSX 80, DSXV 80 and DXV 80
The new X series nozzle feature a threadless fixture system whereby
the nozzle is inserted into the head and locked into place by apllying
a 1/4 turn. This feature allows the nozzles to be quickly and easily
exchanged and also improves the rate of thermal transfer from the
head to the nozzle.
DSX 80 DSXV 80 DXV 80
17
Ø 0,4
Order No. Model Description Width A Thickness B
005 44 651 99 RTW 1 Tip set bent 45° Ø 0,4 mm
005 44 652 99 RTW 2 Tip set bent 45°, Chisel 0,7 mm 0,4 mm
005 44 653 99 RTW 3 Tip set bent 45°, Chisel 3 mm 1,0 mm
005 44 654 99 RTW 4 Tip set bent 45°, Chisel 6 mm 1,0 mm
Plug-in adjusted Soldering Tip Set for WMRT
Soldering Tips
18
Soldering tips for WMRP
Order No. Model Description Width A Thickness B
005 44 601 99 RT1 Needle tip Ø 0,2 mm
005 44 612 99 RT1SC Chisel 0,4 mm 0,15 mm
005 44 602 99 RT2 Round tip slim Ø 0,8 mm
005 44 603 99 RT3 Chisel tip 1,3 mm 0,4 mm
005 44 604 99 RT4 Chisel tip 1,5 mm 0,4 mm
005 44 605 99 RT5 Chisel tip bent 30° 0,8 mm 0,4 mm
005 44 606 99 RT6 Round tip 45° sloped 1,2 mm
005 44 607 99 RT7 Knife tip 45° sloped 2,2 mm
005 44 608 99 RT8 Chisel tip 2,2 mm 0,4 mm
005 44 609 99 RT9 Chisel tip 0,8 mm 0,4 mm
005 44 610 99 RT10 Gull wing 1,2 mm 2,0 mm
005 44 611 99 RT11GW Chisel tip 3,6 mm 0,9 mm
005 44 613 99 RT Measuring Tip
Soldering Tips
19
MPR 80
Soldering Tips
for WSP 80, WSP 80FE, WP 80 and MPR 80
WSP 80 (FE) WP 80
Description Width A Thickness B Length Type Order No.
Chisel 0,4 mm 0,15 mm 15,0 mm LT 1SC 005 44 494 99
Chisel 0,8 mm 0,4 mm 13,5 mm LT H 005 44 437 99
Chisel* 0,8 mm 0,4 mm 13,5 mm LT HHPB 005 44 430 99
Chisel 1,6 mm 0,7 mm 13,5 mm LT A 005 44 403 00
Chisel* 1,6 mm 0,7 mm 13,5 mm LT AHPB 005 44 431 99
Chisel 2,4 mm 0,8 mm 13,5 mm LT B 005 44 405 00
Chisel* 2,4 mm 0,8 mm 13,5 mm LT BHPB 005 44 432 99
Chisel 3,2 mm 0,8 mm 13,5 mm LT C 005 44 407 00
Chisel 4,6 mm 0,8 mm 13,5 mm LT D 005 44 409 00
Chisel* 4,6 mm 0,8 mm 13,5 mm LT DHPB 005 44 483 00
Chisel long 1,2 mm 0,4 mm 21,0 mm LT K 005 44 413 00
Chisel long 2,0 mm 1,0 mm 21,0 mm LT L 005 44 414 00
Chisel long 3,2 mm 1,2 mm 21,0 mm LT M 005 44 415 00
Chisel bent 0,8 mm 0,4 mm 18,0 mm LT HX 005 44 420 99
Chisel bent 1,6 mm 0,7 mm 18,0 mm LT ALX 005 44 443 00
Chisel bent 2,4 mm 0,8 mm 18,0 mm LT BX 005 44 442 00
Chisel bent 1,6 mm 0,8 mm 13,5 mm LT AX 005 44 427 00
Chisel bent 30° Ø 1,2 mm 0,4 mm 16,5 mm LT 4X 005 44 428 00
Round slim Ø 0,2 mm -- 15,0 mm LT 1S 005 44 436 99
Ø 0,5 mm 16,0 mm LT 1SA 005 44 488 99
Ø 0,5 mm 14,0 mm LT 1A 005 44 489 99
Round Ø 0,25 mm 14,0 mm LT 1 005 44 435 99
Round Ø 1,6 mm 13,5 mm LT AS 005 44 404 00
Round Ø 3,2 mm 13,5 mm LT CS 005 44 411 00
Round slim bent 30° Ø 2,0 mm Ø 0,4 mm 20,5 mm LT 1SLX 005 44 426 99
Round bent 30° Ø 0,4 mm 12,5 mm LT 1X 005 44 425 99
Round sloped 45° slim Ø 1,2 mm 15,0 mm LT 4 005 44 421 00
Round sloped 45° Ø 1,2 mm 13,5 mm LT F 005 44 408 00
Round sloped 45° long 2,4 mm 4,0 mm 18,0 mm LT BB 005 44 444 00
Round sloped 45° long 3,2 mm 6,0 mm 18,0 mm LT CC 005 44 445 00
* HPB solder = solder with high consumption of lead for special applictations
AAllll WWeelllleerr ““LLoonngglliiffee”” ttiippss aarree iiddeeaall ffoorr wwoorrkkiinngg wwiitthh lleeaaddffrreeee ssoollddeerr
Description Width A Thickness B Length Type Order No.
Conical long Ø 0,2 mm 26,4 mm LT 1L 005 44 423 99
Conical long Ø 0,4 mm 21,0 mm LT S 005 44 406 99
Conical long bent Ø 0,2 mm 26,4 mm LT 1LX 005 44 424 99
Gull wing 45° Ø 2,3 mm 3,2 mm 18,8 mm LT GW 005 44 410 00
Knife tip 6,2 mm 16,0 mm LT KNLF 005 44 479 00
LT Measuring tip
for thermo element Ø 0,5 mm 13,0 mm 005 44 416 00
LT Screw in tip with M4 thread 8,0 mm 005 44 449 99
C
B
A
A
C
B
Description Width A Thickness B Length C Type Order No.
Blade 10,4 mm 0,6 mm 7,1 mm LT SMT01 LTSMT01
Blade 16,8 mm 0,6 mm 7,1 mm LT SMT02 LTSMT02
Blade 20,8 mm 0,6 mm 7,1 mm LT SMT03 LTSMT03
Slot 1,8 mm 3,4 mm 1,8 mm LT SMT04 LTSMT04
Slot 1,5 mm 2,3 mm 1,8 mm LT SMT05 LTSMT05
Slot 2,5 mm 1,7 mm 1,4 mm LT SMT06 LTSMT06
Slot 2,3 mm 4,5 mm 1,8 mm LT SMT07 LTSMT07
Tunnel 4,6 mm 5,1 mm 2,3 mm LT SMT08 LTSMT08
Tunnel 10,4 mm 5,1 mm 2,3 mm LT SMT09 LTSMT09
Tunnel 11,5 mm 6,9 mm 2,3 mm LT SMT10 LTSMT10
B
C
A
AAllll WWeelllleerr ““LLoonngglliiffee”” ttiippss aarree iiddeeaall ffoorr wwoorrkkiinngg wwiitthh lleeaaddffrreeee ssoollddeerr
Soldering Tips
for WSP 80, WSP 80FE, WP 80 and MPR 80
SMT soldering tip for reworks on SMT compontents
MPR 80WSP 80 (FE) WP 80
20
Soldering Tips
for micro soldering pencil WMP
Description Width A Thickness B Length C Type/Order No.
Chisel tip 0,4 mm 0,15 mm 14,0 mm NT 1SC
0,8 mm 0,4 mm 8,4 mm NT H
1,2 mm 0,4 mm 8,4 mm NT K
1,6 mm 0,4 mm 9,5 mm NT A
1,6 mm 0,4 mm 7,4 mm NT 6
2,4 mm 0,8 mm 7,8 mm NT B
3,2 mm 0,8 mm 8,2 mm NT C
4,0 mm 0,8 mm 8,6 mm NT D
Chisel tip, bent 1,6 mm 0,4 mm 8,2 mm NT AX
Round tip, bent 45° Ø 0,4 mm 8,6 mm NT 1X
Round tip Ø 0,25 mm – 7,4 mm NT 1
Round tip slim Ø 0,25 mm – 8,5 mm NT 1S
Round tip, sloped Ø 1,2 mm – 9,9 mm NT 4
45°
Gull wing 2,0 mm 3,0 mm 13,4 mm NT GW
NT Measuring tip Ø 0,5 mm – – NT MS
for thermo element
NT-Tip
21
22
Soldering Tips
for soldering iron WSP 150
Description Width A Thickness B Type Order No.
Chisel 3,2 mm 1,2 mm LHT C 005 44 455 99
4,7 mm 1,8 mm LHT D 005 44 452 99
6,7 mm 1,8 mm LHT E 005 44 451 99
9,3 mm 1,8 mm LHT F 005 44 450 99
Chisel bent 5 mm 2 mm LHT DX 005 44 462 00
7 mm 2 mm LHT EX 005 44 461 00
10 mm 2 mm LHT FX 005 44 460 00
Sloped 45° – – LHT D45 005 44 456 00
for solar panel
production
LHT Measuring tip – – – 005 44 453 99
for thermo element
Ø 0,5 mm
LHT Screw tip with outer threat M6 005 44 454 00
23
Accessories
Soft solution for cleaning from lead free
solder with metal wool.
Dry Cleaner WDC (005 15 124 99)
Soft solution for cleaning from lead free
solder with metal wool. For WDH safety rests.
Dry Cleaner WDC 2 (005 15 125 99)
For regeneration of oxidized tips, works fast and
easy with low temperature. Environmentally
safe, no halides, lead, rosin or residue. Regular
use will prolong life time of the tips.
Tip Activator (005 13 031 99)
For cleaning of desoldering nozzles and for
nozzle exchange.
Cleaning Tool (005 13 500 99)
Spare filter for Desoldering iron DSX 80
Service Set (005 13 124 99)
Barrel for WSP 80 005 87 447 10
Barrel long f. WP 80 (55 mm) 005 87 448 46
Barrel short f. WP 80 (40 mm) 005 87 448 45
Barrel for Soldering Iron WSP 80 and WP 80
Spare cartridge for Desoldering iron DXV 80,
5 pieces
Cartridge (005 87 418 15)
Grindstone for removal of compact oxid films
Polishing Bar (WPB 1)
Dimensions 70 x 55 x 16 mm
Sponge (005 22 419 99) 5 pcs.
Additional Safety Rests
Safety rests with Stop+Go Function
The safety rests with Stop+Go function have
an integrated micro switch which is activated
when the soldering iron is picked up or put
down. The operator can decide between an
immediate or delayed (20 min) temperature
reduction (SETBACK) to 150°C (300°F) and
programme the power unit accordingly.
For digital Soldering units only.
Standard Safety rests
complete with sponge
Safety rest for WP 80 Micro
soldering pencil
WDH 10 (005 15 121 99)
Safety rest for WMP Micro soldering pencil
WDH 20 (005 15 122 99)
Consisting of WMP Soldering Iron and WDH 20T Safety rest with Stop + Go function.
WMPT Soldering Set (005 33 159 99)
Safety rest for HAP 200 Hot air pencil, HAP 1
Hot air pencil, DSX 80 Desoldering iron, LR 21
Soldering pencil, WSP 150 Soldering iron and
LR 82 Soldering iron
WDH 30 (005 15 152 99)
24
Safety rest for MPR 80 Peritronic
soldering pencil
Safety rest for WMRP with Stop + Go function
Safety rest for WMP Micro soldering pencil
with Stop + Go function
Safety rest for WTA 50 Tweezer
Safety rest for DXV 80 Desoldering iron
WDH 40 (005 15 153 99)
Safety rest for WMRP Micro soldering pencil
with Stop + Go function
WDH 50 (005 15 156 99)
AK 51 (005 15 042 99)
KH 25P (005 15 033 99)
WMRH (005 15 145 99)
Safety rest for WMRT with Stop + Go function
WMRTH (005 15 146 99)
WDH 20T (005 15 162 99)
Safety rest for WP 80 and WSP 80 Micro
soldering pencil with Stop + Go function
WDH 10T (005 15 161 99)
25
Weller brings to the market an extended generation of versatile
soldering / desoldering and hot air tools. Performance has been
increased with soldering irons and desoldering irons up to 200 W.
The Weller WR 3M station easily connects to a variety of new and
existing Weller tools and accessories to provide even greater flexibility.
The matrix below makes selection easy, and puts you firmly in control
of all your workbench needs.
Matrix
HAP 200 Hot Air Pencil
(WDH 30 Safety rest for HAP 200)
HAP 1 Hot Air Pencil
(WDH 30 Safety rest for HAP 1)
WMP Micro Soldering Pencil 65 W
(WDH 20T Safety rest for WMP)
DSX 80 Desoldering Iron 80 W
(WDH 30 Safety rest for DSX 80)
DXV 80 Desoldering Iron 80 W
(WDH 40 Safety rest for DXV 80)
WMRP Soldering Pencil
(WDH 50 Safety rest for WMRP)
WP 80 Micro Soldering Pencil 80 W
(WDH 10 Safety rest for WP 80)
WSP 150 Soldering Iron 150 W
(WDH 30 Safety rest for WSP 150)
LR 21 Antistatic soldering pencil set
(WDH 30 Safety rest for LR 21)
WSP 80 Micro Soldering Pencil 80 W
(WDH 10 Safety rest for WSP 80)
LR 82 Antistatic soldering iron set
(WDH 30 Safety rest for LR 82)
MPR 80 Antistatic Peritronic soldering pencil set
(KH 25P Safety rest for MPR 80)
WMRT Tweezer
(WMRTH Safety rest for WMRT)
WST 20 Thermal wire stripper with Safety rest
WSB 80 Solder Bath
WTA 50 Tweezer
(AK 51 Safety rest for WTA 50)
WST 82 Thermal wire stripper with Safety rest
WSB 150 Solder Bath
WHP 80 Preheating Plate
R 06
NT 1
DX 113HM
DX 113HM
RT 3
LTB
LHTF
ETB
LTB
HT 2
LTB
RTW 2
WTA 1
Soldering Tip of Delivery
WR 3M
26
27
Notes
005 57 101 00
www.cooperhandtools.com/europe
GERMANY GREAT BRITAIN
Cooper Tools GmbH Cooper Tools
Carl-Benz-Str. 2 A Division of Cooper (GB) Ltd.
74354 Besigheim
4th Floor Pennine House
Tel: (07143) 580-0 Washington, Tyne & Wear
Fax: (07143) 580-108 NE37 1LY
Tel: (0191) 419 7700
Fax: (0191) 417 9421
FRANCE ITALY SWITZERLAND
Cooper Tools S.A.S. Cooper Italia S.r.l. Erem S.A.
25 Rue Maurice Chevalier BP 46 Viale Europa 80 Rue de la Roselière 8
77832 Ozoir-la-Ferrière Cedex 20090 Cusago (MI) 1400 Yverdon les Bains
Tel: (0) 1.60.18.55.49 Tel: (02) 9033101 Tel: (024) 426 12 06
Fax: (0) 1.64.40.33.05 Fax: (02) 90394231 Fax: (024) 425 09 77
© 2006, Cooper Industries, Inc.
Weller is a registered trademark and registered design of Cooper Industries Inc.
