
WMHP20 WMHP35 WMHP50 WMHP100 Condions
Package style TO-220 TO-247
Power rang was 20 35 50 100 Heatsink with 25°C ange temperature
Power rang was 1.5 2.5 3 3.5 Without heatsink, in free air 25°C
Liming element voltage volts 350 700 dc or ac rms
Resistance range ohms R05 – 10K
Dielectric strength volts 1800 ac rms for 60s
Working temperature range °C -65 to 150 -65 to 175
Insulaon resistance ohms >10G Between terminals and tab
Tolerances % ≤1R0: ±5 >1R0: ±1, ±5
TCR ppm/°C ≤R20: ±1000 >R20–3R0: ±300 >3R0-10R: ±100 >10R: ±50 25 to 105°C
Standard values E24 preferred
Test Performance
Load at Rated Power: 2000hrs at rated power ±∆R% 1
Short Term Overload: 2 x rated power with applied voltage not to exceed 1.5 x maximum connuous operang voltage for 5 seconds ±∆R% 0.5
Damp Heat with Load: 40 ±2°C, 90 – 95% RH, maximum working voltage 1.5 hours on, 0.5 hours o, 1000 hours ±∆R% 1
Thermal Shock: -65°C/150°C, 100cycles ±∆R% 0.3
Terminal Strength: 2.4N pull test ±∆R% 0.2
WMHP Series
TO-220 & TO-247 standard power packages
Very low thermal resistance
Non-inducve thick lm technology
20 to 100 wa high power resistors
Single screw mounng to heatsink
Suitable for high frequency / fast pulse use
Electrical Data
Physical Data
Performance Data
Heatsink Mount High Power Resistors
Resistors
04.16
General Note
TT Electronics reserves the right to make changes in product specication without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
All parts are Pb-free and comply with EU Direcve 2011/65/EU (RoHS2)
Dimensions (mm) & Weight (g)
TO-220 TO-247
A10.16 ±0.25 15.75 ±0.26
B15 ±0.3 20.7 ±0.26
C4.6 ±0.2 4.95 ±0.26
D3.85 ±0.15 3.63 ±0.1
E13.75 ±0.5 14.48 ±1.27
F4 max 2.79 ±0.76
G5.08 ±0.25 3.63 ±0.18
H0.78 ±0.08 1.52 ±0.1
J1.3 ±0.1 10.16 ±0.26
K6.4 ±0.25 5.33 ±0.26
L0.51 ±0.15 0.81 ±0.26
M2.27 ±0.25 2.41 ±0.26
Wt 2.0 nom 3.7 nom TO-220 TO-247
BI Technologies IRC Welwyn