© 2000 IXYS All rights reserved 1 - 2
Features
• Thyristor controller for AC (circuit
W3C acc. to IEC) for mains requency
• Package with metal base plate
• Isolation voltage 3000 V~
• Planar passivated chips
• UL applied
• ¼" fast-on power terminals
Applications
• Switching and control of
three phase AC circuits
• Softstart AC motor controller
• Solid state switches
• Light and temperature control
Advantages
• Easy to mount with two screws
• Space and weight savings
• Improved temperature and power
cycling capability
• High power density
• Light weight and compact
VRSM VRRM Type
VDSM VDRM
VV
800 800 VWO 36-08io7
1200 1200 VWO 36-12io7
1400 1400 VWO 36-14io7
1600 1600 VWO 36-16io7
Three Phase
AC Controller Modules
Symbol Test Conditions Maximum Ratings
IRMS TK = 85°C, 50 - 400 Hz (per phase) 39 A
ITRMS TVJ = TVJM 28 A
ITAVM TK = 85°C; (180° sine) 18 A
ITSM TVJ = 45°C; t = 10 ms (50 Hz), sine 320 A
VR = 0 t = 8.3 ms (60 Hz), sine 350 A
TVJ = TVJM t = 10 ms (50 Hz), sine 280 A
VR = 0 t = 8.3 ms (60 Hz), sine 310 A
I2tTVJ = 45°C t = 10 ms (50 Hz), sine 500 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 520 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 390 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 400 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 20 A 150 A/ms
f =50 Hz, tP =200 ms
VD = 2/3 VDRM
IG = 0.3 A non repetitive, I T = ITAVM 500 A/ms
diG/dt = 0.3 A/ms
(dv/dt)cr TVJ = TVJM;V
DR = 2/3 VDRM 1000 V/ms
RGK = ¥; method 1 (linear voltage rise)
PGM TVJ = TVJM tp = 30 ms10W
IT = ITAVM tp = 300 ms5W
PGAVM 0.5 W
VRGM 10 V
TVJ -40...+125 °C
TVJM 125 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V~
IISOL £ 1 mA t = 1 s 3000 V~
MdMounting torque (M5) 5 ± 15 % Nm
(10-32 UNF) 44 ± 15 % lb.in.
Weight typ. 110 g
Preliminary data
VWO 36
Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated.
IXYS reserves the right to change limits, test conditions and dimensions
IRMS = 3x 39 A
VRRM = 800-1600 V
14 1 16 2 17 3
710 811 913
© 2000 IXYS All rights reserved 2 - 2
Dimensions in mm (1 mm = 0.0394")
Symbol Test Conditions Characteristic Values
ID, IRTVJ = TVJM; VR = VRRM; VD = VDRM £5mA
VTIT= 45 A; TVJ = 25°C£1.45 V
VT0 For power-loss calculations only 0.85 V
rT13 mW
VGT VD = 6 V; TVJ = 25°C£1.0 V
TVJ = -40°C£1.2 V
IGT VD = 6 V; TVJ = 25°C£65 mA
TVJ = -40°C£80 mA
VGD TVJ = TVJM;V
D = 2/3 VDRM £0.2 V
IGD £5mA
ILTVJ = 25°C; tP = 10 ms£150 mA
IG = 0.3 A; diG/dt = 0.3 A/ms
IHTVJ = 25°C; VD = 6 V; RGK = ¥ £ 100 mA
tgd TVJ = 25°C; VD = 1/2 VDRM £2ms
IG = 0.3 A; diG/dt = 0.3 A/ms
tqTVJ = TVJM; IT = 20 A, tP = 200 ms; di/dt = -10 A/ms typ. 150 ms
VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM
RthJC per thyristor; sine 180°el 1.3 K/W
per module 0.216 K/W
RthJK per thyristor; sine 180°el 1.5 K/W
per module 0.25 K/W
dSCreeping distance on surface 16.1 mm
dACreepage distance in air 6.0 mm
aMax. allowable acceleration 50 m/s2
VWO 36
2,8 x 0,8
