THIS DRAWING COVERS PROPRIETARY ITEM AND IS THE PROPERTY OF THE APM-HEXSEAL CORPORATION.
THIS DRAWING IS NOT TO BE COPIED OR USED WITHOUT THE WRITTEN APPROVAL OF AN OFFICER OF THE APM-HEXSEAL CORPORATION.
MAT'L: AS NOTED
MAXIMUM AND MINIMUM MEASURE-
MENTS ARE STATED DIRECTLY ON
EACH DIMENSION.
REV.
FINISH:
DESCRIPTION
APM-HEXSEAL CORPORATION
TITLE:
DWG. NO.
CHKD.
DWN.
ENG.
SCALE
DATE
R-0000-00-00
AS NOTED
C max RECOM. CLEAR.
HOLE (max.)
0.181"
0.238"
0.347"
0.403"
0.403"
0.517"
0.294"
D max
0.062"
0.080"
0.115"
0.133"
0.133"
0.175"
0.097"
THREAD SIZE LENGTH TYPICAL CLEARANCE HOLE DETAIL
STANDARD SPECIFICATIONS & COMMON OPTIONS (HOW TO ORDER)
STD. SCREW MATERIAL: TYPE 18/8 STAINLESS STEEL PER DFARS (OTHER MATERIALS AVAILABLE)
STD. SCREW FINISH: NATURAL (PASSIVATED QQ-P-35 UNLESS OTHERWISE SPECIFIED)
STD. O-RING MATERIAL: SILICONE RUBBER (SEE TABLE FOR O-RING OPTIONS)
SAMPLE CATALOG
NO.
R
R2-56X1/4-2701-BLKOX
PAN HEAD WITH
CROSS RECESS
SCREW TYPE
2-56 ENTER BASIC
THREAD SIZE
THREAD
1/4 ENTER LENGTHLENGTH X
-BLKOX ENTER FROM TABLE
OPTIONS
AVAILABLE O-RING MATERIALS
Compound
Suffix
-2701
-2615
-5701
-4601
-3701
-7601
Material
Silicone
Rubber
Fluoro-
Silicone
Rubber
Viton A
Buna N
(NBR)
Neoprene
(EPR)
Ethylene
Propylene
(EPDM)
Service
Temp.
-78°F to 450°F
-61°C to 232°C
-20°F to 400°F
-29°C to 204°C
-65°F to 250°F
-54°C to 121°C
-65°F to 300°F
-54°C to 149°C
-65°F to 300°F
-54°C to 149°C
-150°F to 500°F
-101°C to 260°C
COMMON OPTIONS
SUFFIX
-BLKOX
-NY
-LY
-TP
DESCRIPTION
BLACK OXIDE PER
MIL-C-13924A,
CLASS 2
LOCKING NYLON
PELLET
LOCKING NYLON
STRIP
LOCKING NYLON
STD. PATCH
NEW DRAWING FORMAT 01.21.09
S. GOK
-2701 ENTER FROM TABLE
O-RING SUFFIX -HTP HIGH TEMP.
LOCKING NYLON
PATCH
1/4" to 1" incl.
10-32 UNF-2A
10-24 UNC-2A
8-32 UNC-2A
6-32 UNC-2A
4-40 UNC-2A
2-56 UNC-2A
1/4-20 UNC-2A
0.095"
0.128"
0.149"
0.177"
0.201"
0.201"
0.250"
3/16" to 1" incl.
1/4" to 1" incl.
1/4" to 1" incl.
3/8" to 1" incl.
3/8" to 1" incl.
3/8" to 11/4" incl.
SEELSKREW PAN HEAD
CROSS RECESSED S. GOK
S. GOK
J. CELLA
CHANGED LENGTH TOLERANCE and ADDED Note
M06.10.08
06.10.08
06.10.08
06.10.08
S. GOK
L
+0 -0.02 UP TO 1/2"
+0 -0.03 1/2" TO 1"
+0 -0.06 1" TO 2"
TOLERANCE
Head
Driver Size
#1
#1
#2
#3
#2
#2
#2
ALL DIMENSIONS IN INCHES
0.517" 0.175"
1/4-28 UNF-2A 0.250" 5/16" to 11/4" incl.
#3
ADDED "PER DFARS" FOR THE SCREW MATERIAL 07.02.09
NS. GOK
LENGTH TOLERANCES CHANGED ACCORDING TO "MS" STANDARD 03.10.10
OS. GOK
INSTAL.
TORQUE
2.5 inch lbs
5.2 inch lbs
9.6 inch lbs
19.8 inch lbs
22.8 inch lbs
75.2 inch lbs
31.7 inch lbs
94 inch lbs
CHANGED CLEAR. HOLE MAX and SCREW FINISH, TOOK OFF MIN. and ADDED INST. TORQUE 04.13.10
S. GOK
PCHANGED MIN. LENGTH OF 4-40 UNC-2A FROM 1/4" TO 3/16" 07.12.10
S. GOK
R
