HY Non-polarized 1 Form C relay that realizes nominal operating power of 150 mW HY RELAYS FEATURES TYPICAL APPLICATIONS 1. Nominal operating power: High sensitivity of 150mW (Single side stable type) A nominal operating power of 150 mW (minimum operating power of 84 mW) has been achieved. 2. The use of gold-clad twin contacts ensures high contact reliability. 3. Sealed construction 1. Automotive equipment Automirrow controller Retractable head light controller 2. Push button device: Dial pulsing 3. Portable video tape recorders and audio devices. 4. Computer peripherals RoHS compliant ORDERING INFORMATION HY 1 Contact arrangement 1: 1 Form C Sensitivity Nil: High sensitivity 150 mW Z: Standard 200 mW Nominal coil voltage (DC) 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Note: In case of 5 V drive circuit, it is recommended to use 4.5 V type relay. TYPES Contact arrangement Nominal coil voltage 1 Form C 1.5V DC 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 150mW type Part No. HY1-1.5V HY1-3V HY1-4.5V HY1-5V HY1-6V HY1-9V HY1-12V HY1-24V 200mW type Part No. HY1Z-1.5V HY1Z-3V HY1Z-4.5V HY1Z-5V HY1Z-6V HY1Z-9V HY1Z-12V HY1Z-24V Standard packing: Tube: 50 pcs.; Case: 2,000 pcs. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB212E 201201-T HY RATING 1. Coil data Contact arrangement 1 Form C Nominal operating current [10%] (at 20C 68F) Coil resistance [10%] (at 20C 68F) 1.5V DC 100mA 15 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 1.5V DC 50mA 33.3mA 30mA 25mA 16.7mA 12.5mA 6.25mA 60 135 166 240 540 960 3,840 133.3mA 11.25 66.7mA 44.5mA 40mA 33.3mA 22.2mA 16.7mA 8.3mA 45 101.2 125 180 405 720 2,880 Nominal coil voltage 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Pick-up voltage (at 20C 68F) 75%V or less of nominal voltage (Initial) 75%V or less of nominal voltage (Initial) Drop-out voltage (at 20C 68F) 10%V or more of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) Nominal operating power Max. applied voltage (at 70C 158F) 150mW 140%V of nominal voltage 200mW 120%V of nominal voltage 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Contact material Nominal switching capacity Max. switching power Max. switching voltage Max. carrying current Max. switching current Min. switching capacity (Reference value)*1 Nominal operating power Specifications 1 Form C Max. 100 m (By voltage drop 6 V DC 1A) Ag+Au clad 1 A 30 V DC (resistive load) 30 W (DC) (resistive load) 60 V DC 2A 1 A (30 V DC) 1mA 1 V DC 150/200mW Insulation resistance (Initial) Min. 100M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. Breakdown voltage (Initial) Electrical characteristics Between open contacts Between contact and coil Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Functional Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Mechanical characteristics Expected life Conditions Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight 500 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) Max. 50C (By resistive method, nominal coil voltage applied to the coil, nominal switching capacity.) Max. 5 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 1 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 2 mm Min. 107 (at 180 cpm) Min. 105 (1 A 30 V DC resistive) (at 20 cpm) Ambient temperature: -40C to +70C -40F to +158F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 1.8 g .063 oz Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. ASCTB212E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e HY REFERENCE DATA 1. Maximum switching power 2. Life curve 3. Mechanical life 5.0 300 200 DC resistive AC resistive 30 V DC resistive load 100 Life, x104 Contact current, A 2.0 Ratio against the rated voltage, %V Tested sample: HY1Z-12V, 10 pcs. Ambient temperature: 20C to 25C 68F to 77F 1.0 50 30 20 10 0.5 100 V AC resistive load 0.2 100 90 80 70 Pick-up voltage 60 Max. 50 Min. 40 Drop-out voltage 30 Max. 20 Min. 10 30 60 100 300 Contact voltage, V 0.2 4. Electrical life 0.4 0 0.6 0.8 1.0 1.2 1.4 Switching current, A Change of pick-up and drop-out voltage Ratio against the rated voltage, %V Tested sample: HY1-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 30 cpm 10 100 1,000 2,000 No. of operations, x104 Change of contact resistance 100 90 Pick-up voltage 80 70 Max. 60 Min. 50 40 Drop-out voltage Max. 30 20 Contact resistance, m 0.1 10 80 60 Max. 40 Min. 20 Min. 10 0 10 No. of operations, x104 5-(1). Coil temperature rise (150 mW high sensitivity type) 5-(2). Coil temperature rise (200 mW Standard type) Tested sample: HY1-9V, 5 pcs. Ambient temperature:24C 75F Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 23C 74F 80 70 1A 60 50 0A 40 30 60 40 30 10 100 0 120 140 160 180 Coil applied voltage, %V 0A 50 20 80 1A 70 10 0 Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 25C 77F 3 80 20 10 20 No. of operations, x 104 6. Operate/release time characteristics 80 100 120 140 160 180 Coil applied voltage, %V Operate/release time, ms 90 Coil temperature rise, C 100 90 Coil temperature rise, C 100 0 20 Operate time 2 1 Release time 0 80 100 120 Coil applied voltage, %V 7. Distribution of pick-up and drop-out voltages 8. Distribution of contact resistance 9. Malfunction shock Tested sample: HY1-12V, 50 pcs. Ambient temperature: 23C 74F Tested sample: HY1-12V, 50 pcs. N.C. side N.O. side Tested sample: HY1Z-12V, 6 pcs. 30 30 20 Pick-up voltage 15 20 10 5 5 0 0 Panasonic Corporation Deenergized condition Energized condition Y Z X X' Z' 980m/s 2 Y Y' 980m/s 2 X Z 980m/s 2 15 10 10 20 30 40 50 60 70 80 90 100 Pick-up/drop-out voltage, V N.C. side N.O. side 25 Quantity Quantity 25 Drop-out voltage Max. x Min. Max. x Min. 980m/s 2 Z' 980m/s 2 X' 980m/s 2 Y' 30 40 Contact resistance m Automation Controls Business Unit industrial.panasonic.com/ac/e ASCTB212E 201201-T HY DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac External dimensions CAD Data 7.4 .291 PC board pattern (Bottom view) 12 .462 2.54 .100 6-1 dia. 6-.039 dia. 7.62 .300 10.1 .398 0.5 .020 5.08 .200 3.5 .138 0.4 dia. .016 dia. 0.25 .010 2.54 .100 5.08 .200 2.54 .100 0.5 .020 7.62 .300 (0.82) (.032) 0.25 .010 (0.82) (.032) Tolerance: 0.1 .004 Schematic (Bottom view) General tolerance: 0.3 .012 1 2 5 10 9 6 NC COM NO NOTE 1. Packing style 1) As shown in the diagram below, the relays are presented in tube packages with pins 1 and 10 on the left. Be sure to maintain relays in the correct orientation when mounting on PC boards. Side with pins 1 and 10. Stopper (gray) 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 4.9 N {500gf} or less Chucking pressure in the direction C: 4.9 N {500gf} or less A Stopper (green) C B Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. For general cautions for use, please refer to the "Cautions for use of Signal Relays" or "General Application Guidelines". ASCTB212E 201201-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e