TgardTM 200 Series Thermally Conductive Insulators HIGH PERFORMANCE THERMAL INTERFACE PRODUCTS The TgardTM 200 is a high performance interface pad. Consisting of a silicone/boron nitride composite, these fiberglass-reinforced pads are used when the lowest thermal resistance and highest dielectric strength are required A high-tear, cut-through and puncture-resistant product, the TgardTM 200 is tough and strong. Burrs cause no problems for the material and the pad will not dry out, crack or fail when pressured between mating parts. The TgardTM 200 is available in the following sizes: 0.010" (0.25 mm) die cut shapes only 0.020" (0.51 mm) sheets and die cut shapes 0.030" (0.75 mm) sheets and die cut shapes FEATURES AND BENEFITS APPLICATIONS * High thermal Conductivity of 5.0 W/mK * Audio and video components * High breakdown voltage of > 6,000 volts * Automotive control units * Resistant to tears and punctures * General high pressure interfaces * UL 94 V0 rated * Motor controllers (R) * Power conversion equipment * Power semiconductors - T0 packages, M0SFETs and IGBTs Americas: +1.800.843.4556 Europe: +49.8031.2460.0 Asia: +86.755.2714.1166 CLV-customerservice@lairdtech.com www.lairdtech.com/thermal TgardTM 200 Series Thermally Conductive Insulators Construction & Composition Color Thickness Thickness tolerance Specific Gravity (Density) Hardness Tensile Strength % Elongation TGARDTM 210 TGARDTM 220 TGARDTM 230 Reinforced boron nitride filled silcone elastomer Reinforced boron nitride filled silcone elastomer Reinforced boron nitride filled silcone elastomer TEST METHOD White Blue Green 0.010" (0.25mm) 0.020" (0.51mm) 0.030" (0.76mm) Visual 0.002" (0.05mm) 0.002" (0.05mm) 0.003" (0.075mm) 1.52 g/cc 1.45 g/cc 1.47 g/cc Helium Pycnometer 85 Shore A 80 Shore A 80 Shore A ASTM D2240 N/A N/A N/A ASTM D412 N/A N/A N/A ASTM D412 Outgassing TML (Post Cured) 0.06% 0.06% 0.06% ASTM E595 Outgassing CVCM (Post Cured ) 0.05% 0.05% 0.05% ASTM E595 UL Flammability Rating 94 V0 94 V1 Not Rated E180840 Temperature Range -60C to 200C -60C to 200C -60C to 200C Thermal Conductivity 5 W/mK 5 W/mK 5 W/mK ASTM D5470 (modified) Thermal Impedance @ 100 psi @ 689 KPa 0.18C-in/W 1.17C-cm/W 0.35C-in/W 2.26C-cm/W 0.40C-in/W 2.28C-cm/W ASTM D5470 (modified) Breakdown Voltage 6,000 VAC 10,000 VAC 20,000 VAC ASTM D149 Volume Resistivity 5x1013 ohm-cm 5x1013 ohm-cm 5x1013 ohm-cm ASTM D257 3.32 3.32 3.32 ASTM D150 Dielectric Constant @ 1 MHz Standard thicknesses: 0.010" (0.25 mm) die cut shapes only, 0.020" (0.51 mm), 0.030" (0.76 mm) Standard sheet sizes: 0.020" and 0.030": 16" x 16" (406 mm x 406 mm) Individual die-cut shapes can be supplied. Pressure sensitive adhesive: Request no adhesive with "AO" suffix. Request adhesive on one side with "A1" suffix. Double-sided adhesive is not available. Reinforcement: TgardTM 200 sheets are fiberglass reinforced. Data for design engineer guidance only. Observed performance varies in application. Engineers are reminded to test the material in application. THR-DS-Tgard-200 0313 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies' Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. (c) Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. A13514-00 Rev I Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Laird Technologies: A15427-004 A15427104 A15437004 A15431004 A15435104 A15037004 A15440104 A15428004 A15432004 A15440004 A15436104 A15436004 A15441104 A15434004 A15434104 A15038104 A15441004 A15432104 A15437104 A15428104 A15433104 A15036004 A15431104 A15433004 A15037104 A15435004 A15036104 A15038004 A15430104