OPB916IZ - Optek Technologies, Inc.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.3 08/08

Page 1 of 4

Photologic® Slotted Optical Switch

OPB916 Series

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPB916BOC Open-Collector

OPB916B 10K Pull-Up

OPB916I Inverted 10K Pull-Up OPB916IOC Inverted Open-Coll ector

Features:

• Low power consumption

• Data rates to 250 kBaud

• Choice of two logic states and two electrical outputs

• 24” (610 mm) minimum 26 AWG UL listed wires

• Slot width 0.20” (5.08 mm)

• Slot Depth 0.635” (16.13 mm)

Description:

The OPB916 series of Photologic® photo integrated circuit switches provide optimum flexibility. Each switch

consists of an infrared Light Emitting Diode (LED) and a Photologic® photo integrated circuit, mounted in an

opaque housing with clear windows for dust protection. The deep slot allows for a longer reach of the optical path

from the 0.650” (16.5 mm) mounting plane. Internal apertures are 0.010” x .060” (.25 mm x 1.52 mm) for the

Photologic’s “S” side and 0.05” x 0.06” (1.27 mm x 1.52 mm) for the LED “E” side.

Devices in this series exhibit stable performance over supply voltages ranging from 4.5 V to 16.0 V, and may be

specified as buffered or inverted with an internal 10 kΩ pull-up resistor or open collector output. Devices are TTL/

LSTTL compatible and can drive up to 10 TTL loads.

Custom electrical, wire or cabling are available. Contact your local representative or OPTEK for more information.

Product Photo Here

Applications:

• Mechanical switch replacement

• Speed indication (tachometer)

• Mechanical limit indication

• Edge sensing

Part

Number

LED

Peak

Wavelength

Sensor

Photologic®

Slot

Width /

Depth

Aperture

Emitter /

Sensor

Lead

Length /

Wire

OPB916BZ

880 nm

10K Pull-Up

0.200” /

0.635” 0.05" / 0.01" 24" / 26 AWG

Wire

OPB916IZ Inv-10K Pull-Up

OPB916BOCZ Open-Collector

OPB916IOCZ Inv-Open-Collector

Ordering Information

RoHS

Color Description

Red Anode

Black Cathode

White Vcc

Blue Output

Green Ground

Light ON

output High

Light ON

output High

Light ON

output Low

Light ON

output Low

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A .3 08/08

Page 2 of 4

Photologic® Slotted Optical Switch

OPB916 Series

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Absolute Maximum Ratings (TA=25°C unless otherwise noted)

Storage & Operating Temperature Range -40°C to +80°C

Input Infrared LED

Diode Reverse DC Voltage 2 V

Input Diode Power Dissipation(2) 75 mW

Forward DC Current 50 mA

Output Photologic®

Supply Voltage, VCC (not to exceed 3 seconds) 18 V

Voltage at Output Lead (Open Collector Output) 30 V

Output Photologic® Power Dissipation(3) 90 mW

Notes:

(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(2) Derate linearly 1.67 mW/°C above 25°.

(3) Derate linearly 2.67 mW/°C above 25°.

(4) Normal application would be with light source blocked, simulated by IF = 0 mA.

(5) All parameters tested using pulse technique.

Color-Pin # Description

Red Anode

Black Cathode

Green Ground

Blue Output

White VCC

Tolerence ±0.010 [0.254]

DIMENSIONS ARE IN: INCHES

[ MILLIMETERS]

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.3 08/08

Page 3 of 4

Photologic® Slotted Optical Switch

OPB916 Series

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

Notes:

(1) Normal application would be with light source blocked, simulated by IF = 0 mA.

(2) All parameters tested using pulse technique.

Electrical Characteristics (TA = 25°C unless otherwise noted)

SYM-

BOL PARAMETER MIN TYP MAX

UNIT

S TEST CONDITIONS

Input Diode

VF Forward Voltage - 1.3 1.8 V IF = 20 mA

IR Reverse Current - - 100 µA VR = 2 V, TA = 25° C

Output Photologic® Sensor

VCC Operating DC Supply Voltage 4.5 - 16 V -

ICCL

Low Level Supply Current:

Buffered with 10k pull-up(1)

Buffered Open-Collector Output(1)

- - 7 mA VCC = 16 V, IF = 0 mA, No Output Load

Inverted with 10k pull-up:

Inverted Open-Collector Output - - 7 mA VCC = 16 V, IF = 10 mA, No Output Load

ICCH

High Level Supply Current:

Buffered with 10k pull-up

Buffered Open-Collector Output

- - 6 mA VCC = 16 V, IF = 10 mA, No Output Load

Inverted with 10k pull-up:

Inverted Open-Collector Output(1) - - 6 mA VCC = 16 V, IF = 0 mA, No Output Load

VOL

Low Level Output Voltage:

Buffered with 10k pull-up

Buffered Open-Collector Output

0.4

VCC = 4.5 V, IOL = 16 mA, IF = 0 mA

Inverted with 10k pull-up:

Inverted Open-Collector Output - - 0.4 V VCC = 4.5 V, IOL = 16 mA, IF = 10 mA

VOH

High Level Output Voltage:

Buffered with 10k pull-up

VCC-2.0

VCC = 4.5 V to 16 V, IF = 10 mA,

IOH = 100 µA

Inverted with 10k pull-up: VCC-2.0 - - V VCC = 4.5 V to 16 V, IF = 0 mA,

IOH

High Level Output Current:

Buffered with 10k pull-up

Buffered Open-Collector Output

- 1.0 10 µA VCC = 4.5 V, IF = 10 mA, VOH = 30 V

Inverted with 10k pull-up:

Inverted Open-Collector Output(1) - 1.0 10 µA VCC = 4.5 V, IF = 0 mA, VOH = 30 V

LED Positive-Going Threshold Current

Buffered with 10k pull-up

Inverted with 10k pull-up

VCC = 5 V, No Output Load

Buffered Open-Collector Output

Inverted Open-Collector Output(1) - 5 10 mA VCC = 4.5 V, IOL = 16 mA

IF(+)/IF(-) Hysteresis - 1.5 - - VCC = 5 V

trtf Rise Time, Fall Time - 50 - ns VCC = 5 V, IF = 0 or 10 mA,

RL = 300 Ω to 5 V, CL = 50 pF

tPLHtPHL Propagation Delay - 3 - µs

IF(+)

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A .3 08/08

Page 4 of 4

Photologic® Slotted Optical Switch

OPB916 Series

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OP B 916B - Flag in M iddle of Slot

0.00

0.20

0.40

0.60

0.80

1.00

1.20

0.00 0.05 0.10 0.15 0.20 0.25

Distance (inches)

Logic

Bottom to Top

Top to Botto

Left to Righ

Right to Left

Right to Left (back)

Left to Right (back)

OPB 916B - Flag Next to Emitter

0.00

0.20

0.40

0.60

0.80

1.00

1.20

0.00 0.05 0.10 0.15 0.20 0.25

Displacement (inches)

Logic

Bottom to Top

to Bottom

Left to Righ

Right to Left

Left to Right (back)

Right to Left (back)

OPB 916B - Flag Next to Sensor

0.00

0.20

0.40

0.60

0.80

1.00

1.20

0.00 0.05 0.10 0.15 0.20 0.25

Displacement (inches)

Logic

Bottom to Top

to Bottom

Left to Righ

Right to Left

Left to Right (back)

Right to Left (back)

Emitter

Sensor

Left to Right Right to Left

0Width

Top to Bottom