APEM
IKL
IKL SERIES
SERIES
SPST
SPST ST
STAND
ANDARD
ARD DIP
DIP
SWITCHES
SWITCHES
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
APEM
GENERAL SPECIFICATIONS
ELECTRICALS
Electrical life 2000 cycles min. per switch @ 24 VDC, 25 mA
Contact rating, non-switching 100 mA at 50 VDC
Contact rating, switching 25 mA at 24 VDC
Contact resistance at current 100 mA
5
0 m max. initial - 100 m max. after life test
Insulation resistance at 100 VDC 100 M minimum
Dielectric strength 500 VAC for 1 minute
Capacitance 5 pf. max. between adjacent terminals
MECHANICALS, THERMALS
Mechanical life 2000 cycles min. per switch
Operating force 1000 grams max.
Vibration 10-55 Hz.per MIL-STD-202F METHOD 201A
Shock 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B
Operating temperature range -40°C to 85°C
SOLDERING & CLEANING RECOMMENDATIONS*
Hand soldering 320°C max. for 2 seconds max.(30 watt iron max.)
Wave soldering 260°C max. for 5 seconds max.
Cleaning (with tape seal) Spray wash from top side only.
* Note: keep switches in OFF position during soldering and cleaning for best results
MATERIALS
Base & Cover Through Hole: UL94V-O, glass fiber filled PBT, black
SMD: UL94V-O, glass fiber filled PPS, black
Actuators UL94V-O, Nylon, white
Contacts Gold over nickel plated copper alloy
Terminals Through hole: Tin/lead plated brass. SMD: Gold over nickel plated copper alloy.
Term. Sealing Molded-in
Tape seal Kapton
PACKAGING
DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position.
Tape & reel packaging per EIA available for SMD models (see next page).
SWITCH SCHEMATIC (TYPICAL)
CROSS
SECTIONS
Double
contact system
See tabulations on following pages for
IKL-series number of positions available (10 shown)
APEM
IKL
IKL SERIES
SERIES
SPST
SPST ST
STAND
ANDARD
ARD DIP
DIP
SWITCHES
SWITCHES
IKL-series
IKL-series
Surface
Surface
mount
mount
IKL-series
IKL-series
Through
Through
Hole
Hole
note: T/R packaging 900 pcs per reel
Code Tubes Pos. A' Dim.
IKL0200000 2 6,02
IKL0300000 3 8,56
IKL0400000 4 11,10
IKL0500000 5 13,64
IKL0600000 6 16,18
IKL0700000 7 18,72
IKL0800000 8 21,26
IKL0900000 9 23,80
IKL0900000 9 26,34
IKL1200000 10 31,42
Code Tubes Code T/R Pos. A' Dim.
IKL0203000 IKL0204001 2 6,02
IKL0303000 IKL0304001 3 8,56
IKL0403000 IKL0404001 4 11,10
IKL0503000 IKL0504001 5 13,64
IKL0603000 IKL0604001 6 16,18
IKL0703000 IKL0704001 7 18,72
IKL0803000 IKL0804001 8 21,26
IKL0903000 IKL0904001 9 23,80
IKL1003000 IKL1004001 10 26,34
IKL1203000 IKL1204001 12 31,42
Tin/Lead plated brass terminals
Gold over nickel plated copper aloy
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
APEM
