RF3613E * * * * Designed for RF Front-end Filter Applications Low Insertion Loss Balanced 150 ohm IC Interface Complies with Directive 2002/95/EC (RoHS) Pb 956.4 MHz SAW Filter Absolute Maximum Ratings Rating Value Units +10 dBm 5 V Operating Temperature Range -40 to +85 C Storage Temperature Range in Tape and Reel -40 to +85 C Input Power Level DC Voltage SM3030-8 Electrical Characteristics Characteristic Sym Center Frequency fC 1 dB Bandwidth BW1 Maximum Insertion Loss, 956.3 to 956.9 MHz ILMAX Notes Min Typ Max 956.4 MHz 900 Amplitude Ripple, p-p, 956.3 to 956.9 MHz Units kHz 2.4 3.0 1.0 1.5 Rejection Referenced to Insertion Loss at 956.5 MHz: 656.5 to 756.5 MHz 40 46 756.5 to 856.5 MHz 35 41 856.5 to 950.5 MHz 15 21 958.0 MHz 13 19 970.5 to 1070.5 MHz 18 23 1070.5 to 1256.5 MHz 34 40 dB Source Impedance ZS 50 Load Impedance ZL 150 Case Style SM3030-8 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator Standard Reel Quantity 955, YWWS Reel Size 7 Inch 1000 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Single-ended Port Terminals 6 Balanced Port 1, 3 Case Ground 4, 5, 7, 8 No Connection 2 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. Page 1 of 7 RF3613E - 3/22/11 R F 3 6 1 3 E -T R C 1 0 3 A p p lic a tio n C ir c u it 5 0 o h m A n te n n a 1 5 n H 2 .2 p F 4 .7 n H 8 7 1 0 0 n H 5 6 1 R F 3 6 1 3 E 4 3 2 T R C 1 0 3 2 3 3 1 4 .7 n H F a ir - R ite 2 5 0 6 0 3 3 0 1 7 Y O b e a d 0 .0 4 7 F 1 0 0 p F 1 o h m V D D _ P A www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. Page 2 of 7 RF3613E - 3/22/11 RF3613E Broadband Response, 656.5 to 1256.5 MHz www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. Page 3 of 7 RF3613E - 3/22/11 RF3613E Response, 954 to 959 MHz, Rejection Marker at 958 MHz www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. Page 4 of 7 RF3613E - 3/22/11 RF3613E Passband Response www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. Page 5 of 7 RF3613E - 3/22/11 8-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Dimension J J I J K N I A B C D E F G H I J K L M N O L M N mm Nom 3.0 3.0 1.27 0.92 0.75 0.60 0.60 1.20 3.19 0.81 0.96 0.81 1.39 0.23 0.38 Min 2.87 2.87 1.14 0.79 0.62 0.47 0.47 1.07 Max 3.13 3.13 1.40 1.05 0.88 0.73 0.73 1.33 Min 0.113 0.113 0.045 0.031 0.024 0.018 0.018 0.042 Inches Nom 0.118 0.118 0.050 0.036 0.029 0.024 0.024 0.047 0.126 0.032 0.038 0.032 0.055 0.009 0.015 Max 0.123 0.123 0.055 0.041 0.034 0.029 0.029 0.052 Case Materials Materials K O O Solder Pad Plating 0.3 to 1.0 m Gold over 1.27 to 8.89 m Nickel Lid Plating 2.0 to 3.0 m Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View TOP VIEW BOTTOM VIEW 1 2 8 7 1 6 6 2 5 5 3 7 955 YWWS A E C B 8 3 H G 4 4 D www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. F Page 6 of 7 RF3613E - 3/22/11 "B" Nominal Size Inches millimeters 7 178 13 330 "B" REF. 100 REF. Tape and Reel Specifications Quantity Per Reel 1000 3000 See Detail "A" 12.0 13. 0 Carrier Tape Dimensions 20 .2 2.0 Ao 3.35 mm Bo 3.35 mm Ko 1.4 mm Pitch 8.0 mm W 12.0 mm COMPONENT ORIENTATION and DIMENSIONS 2.0 4.0 PIN #1 A 1.50 1.75 0.3 0.05 Bo B Ao 12.0 5.5 RO.3 (MAX.) B Pitch A Ko R0.5 (MAX.) 1.5 SECTION A-A SECTION B-B www.RFM.com E-mail: info@rfm.com (c)2010-2011 by RF Monolithics, Inc. USER DIRECTION OF FEED Page 7 of 7 RF3613E - 3/22/11