PA02M
PA02MU 1
PA02M/883
BURN IN CIRCUIT
* These components are used to stabilize device due to poor
high frequency characteristics of burn in board.
** Input signals are calculated to result in internal power dissipa-
tion of approximately 2.1W at case temperature = 125°C.
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent current IQ 25°C ±15V VIN = 0, AV = 100, RCL = .2Ω 40 mA
1 Input offset voltage VOS 25°C ±15V VIN = 0, AV = 100 10 mV
1 Input offset voltage VOS 25°C ±7V VIN = 0, AV = 100 11.6 mV
1 Input offset voltage VOS 25°C ±19V VIN = 0, AV = 100 10.8 mV
1 Input bias current, +IN +IB 25°C ±15V VIN = 0 200 pA
1 Input bias current, –IN –IB 25°C ±15V VIN = 0 200 pA
1 Input offset current IOS 25°C ±15V VIN = 0 100 pA
3 Quiescent current IQ –55°C ±15V VIN = 0, AV = 100, RCL = .2Ω 60 mA
3 Input offset voltage VOS –55°C ±15V VIN = 0, AV = 100 14 mV
3 Input offset voltage VOS –55°C ±7V VIN = 0, AV = 100 15.6 mV
3 Input offset voltage VOS –55°C ±19V VIN = 0, AV = 100 14.8 mV
3 Input bias current, +IN +IB –55°C ±15V VIN = 0 200 pA
3 Input bias current, –IN –IB –55°C ±15V VIN = 0 200 pA
3 Input offset current IOS –55°C ±15V VIN = 0 100 pA
2 Quiescent current IQ 125°C ±15V VIN = 0, AV = 100, RCL = .2Ω 60 mA
2 Input offset voltage VOS 125°C ±15V VIN = 0, AV = 100 15 mV
2 Input offset voltage VOS 125°C ±7V VIN = 0, AV = 100 16.6 mV
2 Input offset voltage VOS 125°C ±19V VIN = 0, AV = 100 15.8 mV
2 Input bias current, +IN +IB 125°C ±15V VIN = 0 30 nA
2 Input bias current, –IN –IB 125°C ±15V VIN = 0 30 nA
2 Input offset current IOS 125°C ±15V VIN = 0 10 nA
4 Output voltage, IO = 5A VO 25°C ±9V RL = 1Ω, RCL = 0Ω 5 V
4 Output voltage, IO = 36mA VO 25°C ±19V RL = 500Ω 18 V
4 Output voltage, IO = 2A VO 25°C ±12V RL = 5Ω, RCL = 0Ω 10 V
4 Current limits ICL 25°C ±9V RL = 5Ω, RCL = 1Ω .54 .86 A
4 Stability/noise EN 25°C ±15V RL = 500Ω, AV = 1, CL = 1.5nF 1 mV
4 Slew rate SR 25°C ±18V RL = 500Ω 13 100 V/µs
4 Open loop gain AOL 25°C ±15V RL = 500Ω, F = 10Hz 86 dB
4 Common mode rejection CMR 25°C ±8.25V RL = 500Ω, F = DC, VCM = ±2.25V 70 dB
6 Output voltage, IO = 5A VO –55°C ±9V RL = 1Ω, RCL = 0Ω 5 V
6 Output voltage, IO = 36mA VO –55°C ±19V RL = 500Ω 18 V
6 Output voltage, IO = 2A VO –55°C ±12V RL = 5Ω, RCL = 0Ω 10 V
6 Stability/noise EN –55°C ±15V RL = 500Ω, AV = 1, CL = 1.5nF 1 mV
6 Slew rate SR –55°C ±18V RL = 500Ω 13 100 V/µs
6 Open loop gain AOL –55°C ±15V RL = 500Ω, F = 10Hz 86 dB
6 Common mode rejection CMR –55°C ±8.25V RL = 500Ω, F = DC, VCM = ±2.25V 70 dB
5 Output voltage, IO = 3A VO 125°C ±7V RL = 1Ω, RCL = 0Ω 3 V
5 Output voltage, IO = 36mA VO 125°C ±19V RL = 500Ω 18 V
5 Output voltage, IO = 2A VO 125°C ±12V RL = 5Ω, RCL = 0Ω 10 V
5 Stability/noise EN 125°C ±15V RL = 500Ω, AV = 1, CL = 1.5nF 1 mV
5 Slew rate SR 125°C ±18V RL = 500Ω 8.5 100 V/µs
5 Open loop gain AOL 125°C ±15V RL = 500Ω, F = 10Hz 86 dB
5 Common mode rejection CMR 125°C ±8.25V RL = 500Ω, F = DC, VCM = ±2.25V 70 dB
100KΩ
1Ω
1Ω
100KΩ
+15V
–15V
5
6
2
7
1
8
3,4
20Ω
* *
*
*
U.U.T
Table 4 Group A Inspection
PA02M/883
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA02MU REVL
PA02M
2 PA02MU
NEED TECHNICAL HELP? CONTACT APEX SUPPORT!
For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@apexanalog.com.
International customers can also request support by contacting their local Apex Microtechnology Sales Representative.
To nd the one nearest to you, go to www.apexanalog.com
IMPORTANT NOTICE
Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change
without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further
notice to any specications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this informa-
tion, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual
property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not
extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR
LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDER-
STOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK.
Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks
of their respective holders.
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA02MU REVL