PAGE . 1
March 9,2012-REV.01
UF3006PT
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
• Exceeds environmental standards of MIL-S-19500/228
• Low power loss, high efficiency
• Low forward voltage, high current capability
• High surge capacity
• Ultra fast recovery times, high voltage
• Lead free in comply with EU RoHS 2002/95/EC directives
UL TRAFAST RECOVERY RECTIFIERS
NOTES :
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A.
3. Mounted on minimum pad for each lead on board.
4. Mounted on infinite heatsink.
MECHANCAL DATA
• Case: TO-3P molded plastic
• Terminals: Lead solderable per MIL-STD-750, Method 2026
• Polarity: As marked.
• Standard packaging: Any
• Weight: 0.2245 ounces, 6.367 grams.
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
600 V olts 30 Amperes
CURRENT
VOLTAGE
PARAMETER SYMBOL VALUE UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
600 V
Maximum RMS Voltage V
RMS
420 V
Maximum DC Blocking Voltage V
DC
600 V
Maximum Average Forward Current per diode I
F(AV)
15 A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method) per diode I
FSM
250 A
Maximum Forward Voltage at 15A per diode V
F
1.7 V
Maximum DC Reverse Current at Rated DC Blocking Voltage per diode I
R
10 μA
Typical Junction Capacitance (Notes 1) CJ80 pF
Maximum Reverse Recovery Time (Notes 2) t
rr
90 ns
Typical Thermal Resistance (Notes 3) per diode R
θJA
37
O
C / W
Typical Thermal Resistance (Notes 4) per diode R
θJC
2.5
O
C / W
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C
0.640(16.25)
0.620(15.75)
0.142(3.60)
0.125(3.20)
0.087(2.20)
0.070(1.80)
0.126(3.20)
0.110(2.80)
0.050(1.25)
0.045(1.15)
0.225(5.70)
0.204(5.20) 0.225(5.70)
0.204(5.20)
0.600(15.25)
0.580(14.75)
0.839(21.30)
0.819(20.80)
0.170(4.30)
0.145(3.70)
0.798(20.25)
0.777(19.75)
0.199(5.05)
0.175(4.45)
0.095(2.40)
0.030(0.75)
0.017(0.45)
PAGE . 2
March 9,2012-REV.01
UF3006PT
0
5
10
15
20
0 25 50 75 100 125 150
TC, Case Temperature (°C)
IF, Forward Current (A)
0.01
0.1
1
10
100
20 40 60 80 100
IR, Reverse Current (uA)
TJ = 25°C
TJ = 75°C
TJ = 125°C
TJ = 150°C
Fig.3 Typical Reverse Characteristics Fig.4 Typical Forward Characteristics
Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance
1
10
100
1000
0.1 1 10 100
VR, Reverse Bias Voltage (V)
CJ, Junction Capacitance (pF)
0.1
1
10
100
0.2 0.4 0.6 0.8 1 1.2
VF, Forward Voltage (V)
TJ = 150°C
TJ = 125°C
TJ = 25°C
TJ = 75°C
Percent of Rated Peak Reverse Voltage (%)
IF, Forward Current (A)
PAGE . 3
March 9,2012-REV.01
UF3006PT
Part No_pa cking code_Version
UF3006PT_T0_00001
UF3006PT_T0_10001
For example :
RB500V-40_R2_00001
Part No. Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Packing Code XX Versio n C o de XXXXX
Packing type 1
st
Code Packing size co de 2
nd
Code HF or RoHS 1
st
Code 2
nd
~5
th
Code
Tape and Ammunition Box
(T/B) AN/A 0HF 0 s erial num ber
Tape an d R eel
(T/R) R7" 1RoHS 1 s erial num ber
B ulk Pa cking
(B/P) B13" 2
Tu be Packing
(T/P) T26mm X
Tape and Reel (Right Oriented)
(TRR) S52mm Y
Tape and Reel (Left Oriented)
(TRL) LPANASERT T/B CATHODE UP
(PBCU) U
FORMING FPANASERT T/B CATHODE DOWN
(PBCD) D
PAGE . 4
March 9,2012-REV.01
UF3006PT
Disclaimer
•Reproducing a nd modifying inf ormation of the document is prohibited without permission
from Panjit International Inc..
•Pa njit International Inc. reserves the rights to ma ke cha nges of the content herein the
document a nytime without notif ication. Please refer to our website f or the latest
document.
Pa njit International Inc. disclai ms a ny and all li ability arising out of the application or use of
a ny product including da mages incidentally a nd consequentially occurred.
•Pa njit Internation al Inc. does not a ssume a ny and all implied warra nties, including warra nties
of fitne ss for particular purpose, non-infringement a nd mercha ntability.
•Applications shown on the herein document are examples of sta ndard use a nd operation.
Customers are respon sible in comprehending the suitable use in particular applications.
Pa njit Internation al Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
•The products shown herein are not de signed a nd authorized for equi pments requiring high
level of reli ability or relating to huma n life a nd for a ny a pplication s concerning life-saving
or life-sustaining, such as medical instruments, tra nsportation equi pment, aerospa ce
ma chinery et cetera. Customers using or selling the se products for use in such applications
do so at their own risk a nd agree to fully indemnify Pa njit Internation al Inc. for a ny da mages
resulting from such improper use or sale.
•
