NTST30100SG, NTSB30100S-1G Very Low Forward Voltage Trench-based Schottky Rectifier http://onsemi.com Exceptionally Low VF = 0.39 V at IF = 5 A 1 2, 4 Features 3 * Fine Lithography Trench-based Schottky Technology for Very Low * * * * * * Forward Voltage and Low Leakage Fast Switching with Exceptional Temperature Stability Low Power Loss and Lower Operating Temperature Higher Efficiency for Achieving Regulatory Compliance Low Thermal Resistance High Surge Capability This is a Pb-Free Device TO-220AB CASE 221A STYLE 6 1 Typical Applications * Switching Power Supplies including Notebook / Netbook Adapters, * * * * * 2 4 I2PAK (TO-262) CASE 418D STYLE 3 Case: Epoxy, Molded Epoxy Meets Flammability Rating UL 94-0 @ 0.125 in Weight (Approximately): 1.9 grams Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Maximum for 10 sec AYWW TS30100SG AKA 3 ATX and Flat Panel Display High Frequency and DC-DC Converters Freewheeling and OR-ing diodes Reverse Battery Protection Instrumentation Mechanical Characteristics * * * * MARKING DIAGRAMS 4 AYWW TS30100SG AKA 12 3 A Y WW G AKA = Assembly Location = Year = Work Week = Pb-Free Package = Polarity Designator ORDERING INFORMATION Package Shipping NTST30100SG TO-220 (Pb-Free) 50 Units/Rail NTSB30100S-1G TO-262 (Pb-Free) 50 Units/Rail Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2010 September, 2010 - Rev. 3 1 Publication Order Number: NTST30100S/D NTST30100SG, NTSB30100S-1G MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 100 V Average Rectified Forward Current (Rated VR, TC = 105C) IF(AV) 30 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 95C) IFRM 60 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 250 A Operating Junction Temperature TJ -40 to +150 C Storage Temperature Tstg -65 to +175 C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Rating Maximum Thermal Resistance Junction-to-Case Junction-to-Ambient Symbol Value Unit RqJC RqJA 2.0 70 C/W C/W ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage (Note 1) (IF = 5 A, TJ = 25C) (IF = 10 A, TJ = 25C) (IF = 30 A, TJ = 25C) vF (IF = 5 A, TJ = 125C) (IF = 10 A, TJ = 125C) (IF = 30 A, TJ = 125C) Maximum Instantaneous Reverse Current (Note 1) (VR = 70 V, TJ = 25C) (VR = 70 V, TJ = 125C) IR (Rated dc Voltage, TJ = 25C) (Rated dc Voltage, TJ = 125C) Typ Max 0.47 0.55 0.84 - - 0.95 0.39 0.51 0.7 - - 0.78 27 11 70 23 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0% http://onsemi.com 2 Unit V mA mA 1000 45 mA mA NTST30100SG, NTSB30100S-1G TYPICAL CHARACTERISTICS 1000 IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) 100 TA = 150C 10 TA = 25C 1 0.1 0.0 TA = 125C 0.2 0.4 0.6 0.8 1.0 1.2 TA = 125C 1 0.1 TA = 25C 0.01 30 40 50 60 70 80 90 100 VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 1. Typical Instantaneous Forward Characteristics Figure 2. Typical Reverse Characteristics 1000 1 10 VR, REVERSE VOLTAGE (V) IF(AV), AVERAGE FORWARD CURRENT (A) 60 TJ = 25C 100 55 45 40 35 30 25 SQUARE WAVE 20 15 10 5 0 0 IPK/IAV = 10 35 IPK/IAV = 20 30 25 20 40 60 80 100 120 TC, CASE TEMPERATURE (C) Figure 4. Current Derating, Case 45 40 RqJC = 2.0C/W dc 50 Figure 3. Typical Junction Capacitance PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) C, JUNCTION CAPACITANCE (pF) 10 0.001 20 10000 100 0.1 TA = 150C 100 IPK/IAV = 5 TA = 150C SQUARE WAVE 20 15 dc 10 5 0 0 5 10 15 20 25 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 5. Forward Power Dissipation http://onsemi.com 3 30 140 NTST30100SG, NTSB30100S-1G R(t), TYPICAL TRANSIENT THERMAL RESISTANCE (C/W) 10 1 50% Duty Cycle 20% 0.1 10% 5% 2% 1% 0.01 0.000001 Single Pulse 0.00001 0.0001 0.001 0.01 0.1 t, Pulse Time (sec) 1 10 Figure 6. Typical Transient Thermal Response, Junction-to-Case http://onsemi.com 4 100 1000 NTST30100SG, NTSB30100S-1G PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AF -T- B F T SEATING PLANE C S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 6: PIN 1. 2. 3. 4. http://onsemi.com 5 ANODE CATHODE ANODE CATHODE MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 NTST30100SG, NTSB30100S-1G PACKAGE DIMENSIONS I2PAK (TO-262) CASE 418D-01 ISSUE D C E V -B- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 4 A W 1 2 DIM A B C D E F G H J K S V W 3 F -T- SEATING PLANE K S INCHES MIN MAX 0.335 0.380 0.380 0.406 0.160 0.185 0.026 0.035 0.045 0.055 0.122 REF 0.100 BSC 0.094 0.110 0.013 0.025 0.500 0.562 0.390 REF 0.045 0.070 0.522 0.551 MILLIMETERS MIN MAX 8.51 9.65 9.65 10.31 4.06 4.70 0.66 0.89 1.14 1.40 3.10 REF 2.54 BSC 2.39 2.79 0.33 0.64 12.70 14.27 9.90 REF 1.14 1.78 13.25 14.00 J G D 3 PL 0.13 (0.005) M T B H M ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTST30100S/D