Cam-Lok "J" Power Series Crouse-Hinds Cam-Lok single pole connectors are specially designed to provide the ultimate in reliable service even under the most severe operating conditions. These single pole plugs and receptacles are insulated in a specially formulated elastomeric material for watertightness and safety. They allow you to connect or disconnect electrical equipment instantly without tools. Cam-Lok conectors are the industry standard for motors, generators, indoor and outdoor lighting distribution panels, and numerous other power applications. Crouse-Hinds Cam-Lok "J" Series plugs are available in two styles: field-attachable non-vulcanized and field-attachable vulcanized. Both meet NEMA 3R requirements. The "J" Power Series offers a choice of three cable ranges: E1015 Series -- For cable size #8-4, 600 volts, rated up to 150 amperes continuous. E1016 Series -- For cable size #2-4/0, 600 volts, rated up to 400 amperes continuous. E1017 Series -- For cable size 350-750CM, 600 volts, rated up to 690 amperes continuous. With "J" Power connectors you get: EXCLUSIVE CAM-LOK ACTION FOR HIGH CONDUCTIVITY -- Cam-Lok's double cam principle provides a positive, vibration proof connection. Just 1/3 of a turn assures a high pressure contact approaching 600 lbs. per sq./in. providing minimum resistance. It gives the best electrical and mechanical connection possible. There is no moving of contact surfaces and therefore, no arcing or burning of contacts. The contacts are a high conductivity copper base alloy carefully machined to a smooth sliding fit, even before locking. SELF-COMPENSATING for wear. Locked contacts will withstand a pulling force of 1000 lbs. RECESSED CONTACTS -- Thermoplastic rubber or neoprene insulated jacket extends past end of both male and female contacts for insulation and safety. COLOR CODED INSULATORS -- All insulators are molded from colorfast material. The five different colors provide fast, easy phase identification. Table of Contents Introduction................................................................................. 2 Applications................................................................................ 3 Field-attachable Styles........................................................... 4 - 5 Series E1015 Catalog Numbers................................................. 6 Series E1016 Catalog Numbers............................................. 7 - 8 Series E1017 Catalog Numbers................................................. 9 Portable Vulcanizing Kits and Presses...................................... 10 Parts, Tools, & Accessories....................................................... 11 COVER PHOTO -- Cutaway of the exclusive locking feature of the Crouse-Hinds CAM-LOK "J" Power Series connector. SAFETY INSULATED PANEL RECEPTACLES -- Panel mounted receptacles permit cable to be quickly connected or disconnected. Available in both male and female receptacles, they are insulated for direct mounting to steel panels thus eliminating costly insulating boards and reducing assembly time. They come with a threaded stud for lug connection or double set screws for connecting cable directly. INTERCONNECTIBILITY -- All connectors within a series have the same connection diameter allowing you to connect smaller cables to larger ones. For example, in the E1016 Series you can connect a #2 to a 4/0 cable connector without an adapter. Series E1015 E1016 E1017 Connection Diameter 3/8" 11/16" 1 1/8" Cable Range #8-#4 #2-4/0 350-750 MCM Applications Entertainment Meets 1993 NEC(R) Code Crouse-Hinds Cam-Lok connectors are designed to meet 1993 NEC(R) Code requirements for listed connectors that are of the locking type. Cam-Lok "J" Power Series connectors provide the means to quickly connect and disconnect power systems safely at concerts and carnivals, as well as connecting generators, standby power, and load testing in hospitals, utilities, and heavy industrial environments. They are UL Listed and CSA Certified.* Utilities Carnivals *Cam-Lok "J" Power Series connectors are UL Listed and CSA Certified only when used with genuine Crouse-Hinds Cam-Lok listed connectors. Construction/Industrial/Mining Field-attachable Plugs Two styles: non-vulcanized plugs and vulcanized plugs. All non-vulcanized plugs, vulcanized plugs, and receptacles of the same series are interconnectable... Non-vulcanized Plugs Tab Insulator design provides watertight seal. Lektralink Ring Female Contact Drive Pin Bellows Cable Jacket Retaining Wire SAFE, EASY ASSEMBLY -- Crouse-Hinds E1016 Power Series non-vulcanozed style plugs feature the exclusive LektralinkTM principle.* The lektralink design permits assembly to cables in seconds with out vulcanization and without exposed set screws or pins. EASE OF DISASSEMBLY -- Disassembly is just as easy. Insert a 3/16" wide screw driver between the contact and insulator, raise the tab on the locking ring and pull the contact from the insulator. Refer to instruction sheet #EB9 packed in each carton. The locking ring is permanently molded into the insulator. (See illustration above). The ring, made of high strength material, cannot cause inductive heating. As the contact is pulled into the insulator a drive pin is captured by the ring, locking the contact into an immovable position. That's all there is to it! LESS DOWNTIME, MORE RELIABILITY -- Crouse-hinds strain relief system distributes flexing over a wide area. A retaining wire prevents cable jacket from pulling away from contacts exposing dangerous bare wires. *The E1015 Series features friction fit attachment. The E1017 Series features mechanical clamp attachment. The insulator material is specially formulated to provide superior heat, weather, ozone, and abrasion resistance. Vulcanized Plugs Termination BarrelCrimp Male InsulatorNeoprene Male Contact Mounting Flange Cam Button Drive Pin Cable Strain Relief Threaded Stud Double Cams Holding ring Vulcanized Tape - prevents contact from moving...forms a watertight seal between contact, cable jacket and insulation. Connector Diameter "U" -shaped slot in ring - prevents contact from moving forward or sideways Safety Insulation Insulator design provides watertight seal Vulcanizing has many advantages... Five simple steps give you Molded-to-Cable Plugs. WATERPROOF -- Prevents corrosion, freezing of connectors, or internal corrosion of cable strands. REDUCES CABLE BREAKAGE -- Vulcanozation distributes flexing over a wide area to provide an effective strain relief system. 5 STEP PROCESS TAKES ONLY 7 MINUTES...Crouse-Hinds Portable Vulcanizing Press produces virtually indestructable cable connectors in your own plant or in the field. You need only four inexpensive parts to make one pair of connectors. SAFE -- Minimizes shorts and shock hazards. Plug insulator is permanently vulcanized to cable so that cable jacket cannot pull away from connection exposing dangerous bare conductor. Can be used outdoors in all kinds of weather. Even around water your connections remain dry and safe. SHATTER RESISTANT -- Insulators will not shatter or crack and are resistant to oil, gasoline, etc. Connections will withstand the impact of trucks or heavy plates without damage. 3. WRAP CRIMP TUBE and cable with uncured tape. Pull into insulator with COM-A-LONG tool. 1. CUT CABLE, strip jacket. Insert bare wire in contact crimping tube. 2. CRIMP contact to cable. 4. WRAP UNCURED TAPE AROUND JOINT, sealing insulator to cable jacket. 5. MOLD. (5 steps take 7 minutes)... repeat process with other half of connector. Refer to EB #90 for detailed instructions. E1015 Series Connectors and Accessories for cable size #8-#4, 600 volts, rated up to 150 amperes continuous NON-VULCANIZED MALE PLUG COLOR MALE BLACK RED GREEN WHITE BLUE SETSCREW FEMALE PLUG CABLE SIZE COMPLETE PART NO. CONTACT ONLY PART NO. INSULATOR ONLY PART NO. COMPLETE PART NO. CONTACT ONLY PART NO. INSULATOR ONLY PART NO. #8-#4 E1015-8306 E1015-8308 E1015-8310 E1015-8311 E1015-8313 A100864-1 A1000869-7 A1000869-9 A1000869-11 A1000869-12 A1000869-14 E1015-8331 E1015-8333 E1015-8335 E1015-8336 E1015-8338 A100865-1 A1000868-7 A1000868-9 A1000868-11 A1000868-12 A1000868-14 FEMALE VULCANIZED MALE PLUG COLOR MALE CRIMP BLACK RED GREEN WHITE BLUE CABLE SIZE COMPLETE PART NO. #8-#4 E1015-1 E1015-3 E1015-5 E1015-6 E1015-19 FEMALE PLUG CONTACT ONLY PART NO. INSULATOR ONLY PART NO. A100087-1 A100092-1 A100092-3 A100092-5 A100092-6 A100092-7 COMPLETE PART NO. CONTACT ONLY PART NO. INSULATOR ONLY PART NO. A100088-1 A100093-1 A100093-3 A100093-5 A100093-6 A100093-14 E1015-50 E1015-52 E1015-54 E1015-55 E1015-47 FEMALE 1 3/8" Dia. Bolt Hole Center Line MALE MALE RECEPTACLE 7/8" Dia. Thru Hole COLOR BLACK RED GREEN WHITE BLUE FEMALE FEMALE RECEPTACLE CABLE SIZE COMPLETE PART NO. COMPLETE PART NO. #8-#4 E1015-1600 E1015-1602 E1015-1604 E1015-1605 E1015-1606 E1015-1625 E1015-1627 E1015-1629 E1015-1630 E1015-1631 Bolt Holes 3/16" Dia. 1 7/8" FLANGE O.D. Threaded stud size 5/16"-18 MOUNTING DIMENSIONS FEMALE TERMINAL CONNECTORS COLOR OFFSET STYLE ANGLE STYLE BLACK RED GREEN WHITE BLUE CABLE SIZE ANGLE STYLE COMPLETE PART NO. OFFSET STYLE COMPLETE PART NO. #8-#4 E1015-575 E1015-577 E1015-579 E1015-580 E1015-581 E1015-625 E1015-627 E1015-629 E1015-630 E1015-631 Stud hole size 5/16" THREE WAY "T" CONNECTORS PARALLELING "T" (MALE-MALE-FEMALE) TAPPING "T" (MALE-FEMALE-FEMALE DOUBLE FEMALE COLOR PARALLELING "T" COMPLETE PART NO. TAPPING "T" COMPLETE PART NO. DOUBLE FEMALE COMPLETE PART NO. BLACK RED GREEN WHITE BLUE E1015-2324 E1015-2326 E1015-2328 E1015-2329 E1015-2348 E1015-2312 E1015-2314 E1015-2316 E1015-2317 E1015-2350 E1015-2352 E1015-2354 E1015-2356 E1015-2357 E1015-2358 PROTECTIVE CAPS MALE FEMALE COLOR COMPLETE PART NO. DESCRIPTION BLACK BLACK A100793-1 A100792-1 CAP FOR MALE CAP FOR FEMALE Connectors and Accessories for cable size #2-4/0, 600 volts, rated up to 400 amperes continuous* NON-VULCANIZED COLOR CABLE SIZE E1016 Series MALE PLUG COMPLETE PART NO. CONTACT ONLY PART NO. FEMALE PLUG COMPLETE PART NO. CONTACT ONLY PART NO. A200074-19 A200074-21 A200074-23 A200074-24 A200074-38 E1016-8056 E1016-8058 E1016-8060 E1016-8061 E1016-7716 A200037-23 INSULATOR ONLY PART NO. INSULATOR ONLY PART NO. E1016-8006 E1016-8008 E1016-8010 E1016-8011 E1016-7700 A200036-18 1/0-2/0 E1016-8012 E1016-8014 E1016-8016 E1016-8017 E1016-7702 A200036-19 A200074-19 A200074-21 A200074-23 A200074-24 A200074-38 E1016-8062 E1016-8064 E1016-8066 E1016-8067 E1016-7718 A200037-24 A200075-19 A200075-21 A200075-23 A200075-24 A200075-44 BLACK RED GREEN WHITE BLUE 1/0-2/0 HEAVY DUTY E1016-8018 E1016-8020 E1016-8022 E1016-8023 E1016-7704 A200038-11 A200074-13 A200074-15 A200074-17 A200074-18 A200074-37 E1016-8068 E1016-8070 E1016-8072 E1016-8073 E1016-7720 A200035-17 A200075-13 A200075-15 A200075-17 A200075-19 A200075-37 BLACK RED GREEN WHITE BLUE 3/0-4/0 E1016-8030 E1016-8032 E1016-8034 E1016-8035 E1016-7708 A200038-6 A200074-13 A200074-15 A200074-17 A200074-18 A200074-37 E1016-8080 E1016-8082 E1016-8084 E1016-8085 E1016-7724 A200035-14 A200075-13 A200075-15 A200075-17 A200075-19 A200075-37 BLACK RED GREEN WHITE BLUE #2-2/0 E1016-8300 E1016-8302 E1016-8304 E1016-8305 E1016-8818 A200065-1 A200074-19 A200074-21 A200074-23 A200074-24 A200074-38 E1016-8325 E1016-8327 E1016-8329 E1016-8330 E1016-8820 A200067-3 A200075-19 A200075-21 A200075-23 A200075-24 A200075-44 BLACK RED GREEN WHITE BLUE 2/0-4/0 E1016-8312 E1016-8314 E1016-8316 E1016-8317 E1016-8819 A200064-1 A200074-13 A200074-15 A200074-17 A200074-18 A200074-37 E1016-8337 E1016-8339 E1016-8341 E1016-8342 E1016-8821 A200090-1 A200075-13 A200075-15 A200075-17 A200075-19 A200075-37 BLACK RED GREEN WHITE BLUE #2-2/0 E1016-8350 E1016-8352 E1016-8354 E1016-8355 E1016-8356 A200630-1 A200074-19 A200074-21 A200074-23 A200074-24 A200074-38 E1016-8375 E1016-8377 E1016-8379 E1016-8380 E1016-8381 A200640-3 A200075-19 A200075-21 A200075-23 A200075-24 A200075-44 BLACK RED GREEN WHITE BLUE 2/0-4/0 E1016-8362 E1016-8364 E1016-8366 E1016-8367 E1016-8368 A200639-1 A200074-60 A200074-62 A200074-64 A200074-65 A200074-66 E1016-8387 E1016-8389 E1016-8391 E1016-8392 E1016-8393 A200641-1 A200075-60 A200075-62 A200075-64 A200075-65 A200075-66 COMPLETE PART NO. CONTACT ONLY PART NO. INSULATOR ONLY PART NO. E1016-7 E1016-9 E1016-11 E1016-12 E1016-46 A200036-2 A2000706-7 A2000706-9 A2000706-11 A2000706-12 A2000706-97 E1016-13 E1016-15 E1016-17 E1016-18 E1016-43 A200036-3 E1016-31 E1016-33 E1016-35 E1016-36 E1016-45 A200038-2 BLACK RED GREEN WHITE BLUE #2-#1 BLACK RED GREEN WHITE BLUE A200075-19 A200075-21 A200075-23 A200075-24 A200075-44 CRIMP SINGLE SETSCREW DOUBLE SETSCREW FEMALE VULCANIZED COLOR CRIMP MALE MALE PLUG CABLE SIZE BLACK RED GREEN WHITE BLUE #2-#1 BLACK RED GREEN WHITE BLUE 1/0-2/0 BLACK RED GREEN WHITE BLUE 3/0-4/0 * NOTE: FEMALE PLUG COMPLETE PART NO. CONTACT ONLY PART NO. INSULATOR ONLY PART NO. E1016-56 E1016-58 E1016-60 E1016-61 E1016-95 A200037-2 A2000705-7 A2000705-9 A2000705-11 A2000705-12 A2000705-64 A2000706-7 A2000706-9 A2000706-11 A2000706-12 A2000706-97 E1016-62 E1016-64 E1016-66 E1016-67 E1016-92 A200037-3 A2000706-13 A2000706-15 A2000706-17 A2000706-18 A2000706-64 E1016-80 E1016-82 E1016-84 E1016-85 E1016-94 A200035-2 A2000705-7 A2000705-9 A2000705-11 A2000705-12 A2000705-64 MALE FEMALE A2000705-13 A2000705-15 A2000705-17 A2000705-18 A2000705-65 Double set-screw male and female plugs are CSA and UL Listed for 400 amps when used with #4/0 90C cable. Crimp and single set-screw male and female plugs are listed for 315 amps. E1016 Series Connectors and Accessories for cable size #2-4/0, 600 volts, rated up to 400 amperes continuous * FEMALE TERMINAL CONNECTORS ANGLE STYLE OFFSET STYLE RECTANGULAR STYLE COLOR CABLE SIZE BLACK RED GREEN WHITE BLUE #8-#4 -- -- -- -- ANGLE STYLE COMPLETE PART NO. ROUND STYLE ROUND COMPLETE PART NO. OFFSET STYLE COMPLETE PART NO. E1016-575 -- -- -- -- FEMALE SAFETY TERMINALS E1016-625 -- -- -- -- RECTANGULAR COMPLETE PART NO. E1016-813 E1016-815 E1016-817 E1016-818 E1016-819 E1016-801 E1016-803 E1016-805 E1016-806 E1016-807 Tap Hole Size 1/2"-13 Stud Hole Size 1/2" INSULATED RECEPTACLES Bolt Holes 7/32" Dia. MALE THREADED STUD STYLE FEMALE DOUBLE SET-SCREW STYLE Stud Size 1/2"-13 1 1/2" 1 1/2" 1 1/2" Thru Hole CABLE SIZE COLOR 2 1/4" FLANGE MOUNTING DIMENSIONS MALE COMPLETE PART NO. FEMALE COMPLETE PART NO. BLACK RED GREEN WHITE BLUE #2-4/0 THREADED STUD E1016-1600 E1016-1602 E1016-1604 E1016-1605 E1016-1612 E1016-1631 E1016-1633 E1016-1635 E1016-1636 E1016-1643 BLACK RED GREEN WHITE BLUE #2-4/0 DOUBLE SETSCREW E1016-1700 E1016-1702 E1016-1704 E1016-1705 E1016-1706 E1016-1725 E1016-1727 E1016-1729 E1016-1730 E1016-1731 THREE WAY LAY-DOWN "T" CONNECTORS PARALLELING "T" (MALE-MALE-FEMALE) TAPPING "T" (MALE-FEMALE-FEMALE) DOUBLE FEMALE COLOR PARALLELING "T" PART NO. TAPPING "T" PART NO. DOUBLE FEMALE PART NO. BLACK RED GREEN WHITE BLUE E1016-2324 E1016-2326 E1016-2328 E1016-2329 E1016-2348 E1016-2312 E1016-2314 E1016-2316 E1016-2317 E1016-2350 E1016-2352 E1016-2354 E1016-2356 E1016-2357 E1016-2358 PROTECTIVE CAPS COLOR CAP FOR MALE CAP FOR FEMALE SNAP BACK METAL COVER DIMENSIONS PART NO. A100601-1 A100602-1 A100895-1 100444 BLACK BLACK PLATED ALUMINUM CAP FOR MALE CAP FOR FEMALE SNAP BACK METAL COVER SPACER THREADED STUD PANEL MOUNTS CABLE SIZE COLOR BLACK YELLOW RED ORANGE GREEN WHITE BLUE BROWN MALE DESCRIPTION #2-4/0 MALE COMPLETE PART NO. E1016-1600S E1016-1601S E1016-1602S E1016-1603S E1016-1604S E1016-1605S E1016-1612S E1016-1619S FEMALE DIMENSIONS THREE-FERTM TAPPING TEE COLOR BLACK YELLOW RED ORANGE GREEN WHITE BLUE * All connectors and receptacles shown above are Listed for 400 amps. PART NO. E1016-9500 E1016-9501 E1016-9502 E1016-9503 E1016-9504 E1016-9505 E1016-9506 FEMALE COMPLETE PART NO. E1016-1631S E1016-1632S E1016-1633S E1016-1634S E1016-1635S E1016-1636S E1016-1643S E1016-1687S Connectors and Accessories for cable size #2-4/0, 600 volts, rated up to 690 amperes continuous* E1017 Series NON-VULCANIZED FEMALE PLUG COLOR DOUBLE SETSCREW MALE PLUG CABLE SIZE COMPLETE PART NO. 350-500MCM BLACK RED GREEN WHITE BLUE CONTACT ONLY PART NO. E1017-350 E1017-352 E1017-354 E1017-355 E1017-356 A200612-1 COMPLETE PART NO. INSULATOR ONLY PART NO. A200056-1 A200056-3 A200056-5 A200056-6 A200056-37 E1017-375 E1017-377 E1017-379 E1017-380 E1017-381 CONTACT ONLY PART NO. INSULATOR ONLY PART NO. A200614-2 A200040-1 A200040-3 A200040-5 A200040-6 A200040-39 MALE FEMALE VULCANIZED COLOR CRIMP MALE PLUG CABLE SIZE COMPLETE PART NO. BLACK RED GREEN WHITE BLUE 350MCM BLACK RED GREEN WHITE BLUE 500MCM BLACK RED GREEN WHITE BLUE 750MCM CONTACT ONLY PART NO. E1017-1 E1017-3 E1017-5 E1017-6 E1017-26 A200028-1 E1017-7 E1017-9 E1017-11 E1017-12 E1017-27 A200028-2 E1017-13 E1017-15 E1017-17 E1017-18 E1017-28 A200028-3 FEMALE PLUG INSULATOR ONLY PART NO. COMPLETE PART NO. CONTACT ONLY PART NO. A200056-1 A200056-3 A200056-5 A200056-6 A200056-37 E1017-50 E1017-52 E1017-54 E1017-55 E1017-74 A200027-5 A200056-1 A200056-3 A200056-5 A200056-6 A200056-37 E1017-56 E1017-58 E1017-60 E1017-61 E1017-75 A200027-6 A200056-7 A200056-9 A200056-11 A200056-12 A200056-41 E1017-62 E1017-64 E1017-66 E1017-67 E1017-76 A200027-7 INSULATOR ONLY PART NO. A200040-1 A200040-3 A200040-5 A200040-6 A200040-39 A200040-1 A200040-3 A200040-5 A200040-6 A200040-39 MALE FEMALE A200040-7 A200040-9 A200040-11 A200040-12 A200040-40 FEMALE TERMINAL CONNECTORS COLOR CABLE SIZE COMPLETE PART NO. BLACK BLACK 350-750MCM 350-750MCM E1017-575 E1017-625 DESCRIPTION ANGLE STYLE OFFSET STYLE Bolt Hole 5/8" ANGLE STYLE RECEPTACLES COLOR BLACK RED GREEN WHITE BLUE MALE OFFSET STYLE FEMALE CABLE SIZE 90 COMPLETE PART NO. 30 COMPLETE PART NO. 90 COMPLETE PART NO. 30 COMPLETE PART NO. 350-750MCM E1017-1600 E1017-1604 E1017-1608 E1017-1610 E1017-1612 E1017-1601 E1017-1605 E1017-1609 E1017-1611 E1017-1613 E1017-1625 E1017-1629 E1017-1633 E1017-1635 E1017-1637 E1017-1626 E1017-1630 E1017-1634 E1017-1636 E1017-1638 90 MALE 30 FEMALE Stud Size 1/2"-13 PROTECTIVE CAPS COLOR BLACK BLACK PART NO. A100603-1 A100604-1 DESCRIPTION CAP FOR MALE CAP FOR FEMALE MALE FEMALE Portable Vulcanizing Kits and Presses Vulcanize connectors and splices with the same basic equipment. The vulcanizing press used for connectors may be converted to a splicing press by replacing connector mold bushings with splice mold bushings (consult factory). COMPLETE VULCANIZING KITS CABLE SIZE #8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 CABLE O.D. .440 .510 .570 .660 .740 .770 .820 .870 .930 E1016 SERIES E1015 SERIES -- -- -- A300100-3 A300100-4 A300100-5 A300100-6 A300100-7 A300100-8 A300120-1 A300120-2 A300120-3 -- -- -- -- -- -- Vulcanizing kit for cable sizes #8-4/0 comes complete with mold bushings and crimping nest for one cable size. Additional cable sizes can be accomodated by ordering additional mold bushings (listed below). See page 11 for crimping presses and nests. NOTE: Vulcanizing equipment for cable sizes #8-4/0 is not interchangeable with equipment for cable sizes 350-750MCM. Other sizes are available. VULCANIZING PRESSES ONLY CABLE SIZE #8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 350MCM 500MCM 750MCM CABLE O.D. .440 .510 .570 .660 .740 .770 .820 .870 .930 1.150 1.310 1.580 E1015 SERIES E1016 SERIES E1017 SERIES A300121-1 A300100-2 A300100-3 -- -- -- -- -- -- -- -- -- -- -- -- A300103-3 A300103-4 A300103-5 A300103-6 A300103-7 A300103-8 -- -- -- -- -- -- -- -- -- -- -- -- A300106-1 A300106-2 A300106-3 PLUG MOLDED BUSHINGS CABLE SIZE #8 #6 #4 #2 #1 1/0 2/0 3/0 4/0 350MCM 500MCM 750MCM NOMINAL CABLE O.D. .440 .510 .570 .660 .740 .770 .820 .870 .930 1.150 1.310 1.580 E1015 SERIES 201015-3 201015-15 201015-18 -- -- -- -- -- -- -- -- -- E1016 SERIES -- -- -- 200895-20 200895-21 200895-22 200895-23 200895-24 200895-17 -- -- -- E1017 SERIES -- -- -- -- -- -- -- -- -- 200006-3 200006-6 200006-8 Vulcanizing press for cable sizes #8-750MCM comes complete with mold bushings for one cable size. Additional cable sizes can be accommodated by ordering additional mold bushings to match your cable size (listed below). NOTE: Vulcanizing equipment for cable sizes #8-4/0 is not interchangeable with equipment for cable sizes 350-750MCM. Parts, Tools, & Accessories PLUG ASSEMBLY TOOLS AND ACCESSORIES PART NO. A400001 100300 100300-1 A101208 A100632 A100072 DESCRIPTION DESCRIPTION PART NO. E1016 Lektralink Assembly Tool Spraylube #70, 12 oz. Spraylube, 16 oz., / brush applicator 2 oz. tube silicon grease for lubricating business end of synthetic rubber insulators Tool for removing E1016 contacts from insulators Cable Cutter - #6-4/0 Cable A200020-1 A200020-2 A200020-3 A200020-4 COM-A-LONG for pulling male contact in E1015 Series COM-A-LONG for pulling female contact in E1015 Series COM-A-LONG for pulling male contact in E1016 Series COM-A-LONG for pulling female contact in E1016 Series CONNECTOR SERIES NO. SET SCREW COPPER SHIM PRESSURE PAD RETAINING WIRE E1015 E1016 E1017 100012-25 100012-18 100012-5 100400-2 100400-4* -- -- 101214 101214 100573-1 INSTRUCTION SHEET EB-175 EB-169 EB-168 *NOTE: Shim 100400-4 is for single set-screw or crimp style. For double set-screw style, use shim 100400-5. E1015 AND E1016 SERIES CRIMPING NEST AND PRESSES CABLE SIZE #8 #4-6 #1-2 1/0-2/0 4/0 CRIMPING NESTS PART NO. 100514-1 100514-2 100514-3 100514-4 100514-6 CRIMPING PRESSES A200914-1 A200914-2 A200914-3 A200914-4 A200914-6 CRIMPING NEST GAGE BLOCK FOR CALIBRATING CRIMPER: #100891. * The product information published in this catalog is sufficiently accurate for most purposes, but is not guaranteed. Product information is subject to change without notice. CRIMPING PRESS