FCPC Features * * * * Threaded nut connector One-piece design for easy termination Very short rigid length High mechanical and thermal resistance according to Telcordia GR-326-CORE Specifications Compliance IEC 61754-13, TIA 604-4-A Technology full ceramic ferrule (2.5 mm) and sleeve Tuning PC continuously APC in 60 steps Mechanical resistance 100 N tensile load Operating temperature -40 C to +85 C Durability min. 1000 mating cycles Material brass nickel-plated 14.9 8.45 4.45 SW10 2 11 2 M8x0.75 9.2 O 4.4 5.5 SW7 15 O 2.2 9.5 X 9.5 9.5 O10 8.4 SW7 11.5 X 7.4 51.4 O 30 2 14.9 15 19 O2 HUBER+SUHNER FIBER OPTICS FCPC Ordering information: FCPC connector 1) Connector type Polishing Insertion loss1) [dB] (mean/97%) SM wide key PC/UPC 0.12/0.25 3.5 FCPC-Z/M-A101 SM small key APC 0.12/0.25 3.5 FCPC-Z/M-A601 SM wide key APC 0.12/0.25 3.5 FCPC-Z/M-A602 SM wide key premium PC/UPC 0.06/0.15 3.5 FCPC-Z/M-H101 SM small key premium APC 0.06/0.15 3.5 FCPC-Z/M-H601 SM wide key premium APC 0.06/0.15 3.5 FCPC-Z/M-H602 G50/125, G62.5/125 wide key PC 0.20/0.50 3.5 FCPC-Z/M-B101 HCS200/230 PC 0.30/0.75 3.5 FCPC-Z/M-D101 Mounting Sleeve material Type with loose and fixed nut for D-hole mounting key width: 2.15 mm zirconia ceramic FCPC-FCPC-C100 with 2-hole flange, 4 mm thick key width: 2.15 mm zirconia ceramic FCPC-FCPC-D100 with loose and fixed nut for D-hole mounting key width: 2.03 mm zirconia ceramic FCPC-FCPC-C600 with 2-hole flange, 4 mm thick key width: 2.03 mm zirconia ceramic FCPC-FCPC-D600 Cable O [mm] Type IEC 61300-3-34 method 2 Ordering information: FCPC adapter Adapter type Standard APC HUBER+SUHNER FIBER OPTICS 31