30
FCPC
51.4
11
Ø10
SW104.45
14.9
8.45
8.4 2 2
Ø 4.4
Ø 2.2
15
14.9
5.5
9.2
2 Ø 2
9.5
9.5
XX
15
9.5
SW7
Ø 19
11. 5
SW7
7.4
M8x0.75
HUBER+SUHNER FIBER OPTICS
Specifications
Compliance IEC 61754–13, TIA 604–4–A
Technology full ceramic ferrule (2.5 mm) and sleeve
Tuning PC continuously
APC in 60° steps
Mechanical resistance 100 N tensile load
Operating temperature –40 °C to +85 °C
Durability min. 1000 mating cycles
Material brass nickel-plated
Features
Threaded nut connector
One-piece design for easy termination
Very short rigid length
High mechanical and thermal resistance according to
Telcordia GR-326-CORE
31
FCPC
HUBER+SUHNER FIBER OPTICS
Ordering information: FCPC connector
Connector type Polishing
Insertion loss1)
[dB] (mean/97%) Cable Ø [mm] Type
SM wide key PC/UPC 0.12/0.25 ≤ 3.5 FCPC–Z/M–A101
SM small key APC 0.12/0.25 ≤ 3.5 FCPC–Z/M–A601
SM wide key APC 0.12/0.25 ≤ 3.5 FCPC–Z/M–A602
SM wide key premium PC/UPC 0.06/0.15 ≤ 3.5 FCPC–Z/M–H101
SM small key premium APC 0.06/0.15 ≤ 3.5 FCPC–Z/M–H601
SM wide key premium APC 0.06/0.15 ≤ 3.5 FCPC–Z/M–H602
G50/125, G62.5/125
wide key PC 0.20/0.50 ≤ 3.5 FCPC–Z/M–B101
HCS200/230 PC 0.30/0.75 3.5 FCPC–Z/M–D101
1) IEC 61300–3–34 method 2
Ordering information: FCPC adapter
Adapter type Mounting Sleeve material Type
Standard
with loose and fixed nut for D–hole mounting
key width: 2.15 mm zirconia ceramic FCPC–FCPC–C100
with 2–hole flange, 4 mm thick
key width: 2.15 mm zirconia ceramic FCPC–FCPC–D100
APC
with loose and fixed nut for D–hole mounting
key width: 2.03 mm zirconia ceramic FCPC–FCPC–C600
with 2–hole flange, 4 mm thick
key width: 2.03 mm zirconia ceramic FCPC–FCPC–D600