NOTES: APHSMAJMCXd REVISIONS . DRAWING NO. REV DESCRIPTION DATE ECO APPR 1. MATERIALS AND FINISHES: THIRD ANGLE PR. @ & |A RELEASE TO MFG. 9/12/06 | 46261 | CPM/ BODY BRASS (ASTMB16 H02, C36000), GOLD PLATING CONTACT PIN BeCu, GOLD PLATING INSULATOR PTFE PER ASTM D 1710 OR EQUIV. 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC 6 GHz 3. MECHANICAL: A. TEMPERATURE RANGE: -65 C TO +165" C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, APH-SMAJ-MCXJ, AND DATE CODE 1/436UNS2A are Oo oO oO oO 6.40 [.252] -_ 7.80 [.307] 21.20 [.835] UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: | MATERIAL oRAWN ATE TLE 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES C. McGRATH 4/27/05 Amphenol +.015 (0,381 mm) +.005 (0,127 mm) +1 ENGINEER DATE SMA FEMALE TO Amphenol Corporation O. BARTHELMES 4/27/05 eee pa auors NOTICE - jhese drawings, S55 rust be oF other data (1) are, and Can the REFERENCE APPROVED La M CX FE MALE Danbury, Conn. U.S.A. 06810 confidential and not. to be diaclosed to any person other | than those to whom they O. BARTHELMES 9/ 8/ 06 A D A PT F R are given by Amphenol Corp. The furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is SCALE: 2:1 SHEET OF not to be regarded by implication or otherwise in any manner licensing, granting ISSUE rights or permitting such holder re, otter perso to manufacture, use or sel ay, CODE ID DWG SIZE DRAWING NO. product. process or design, potented. of otherwise, that may in ony woy be related tol ca FUE: \DEPT611\ASSY\APH\SMAJMCXd 74868 B APHSMAJMCXJ_| A