POSITRONIC INDUSTRIES Positronic Products Power D-Subminiature Contact Sizes: 8, 20 and 22 Current Ratings: To 40 amperes nominal Terminations: Crimp, wire solder, straight solder, right angle solder and straight press-fit Configurations: Multiple variants in both standard and high densities Qualifications: MIL-DTL-24308, Goddard Space Flight 311P, MIL-C-39029, IP65, IP67 Contact Sizes: 0, 8, 12, 16, 20 and 22 Current Ratings: To 150 amperes Terminations: Crimp, wire solder, straight solder, right angle solder, straight press-fit and right angle press-fit Configurations: Multiple variants in a variety of package sizes Compliance: PICMG 2.11, PICMG 3.0, VITA 41 FEATURES: Hot swap capability * AC/DC operation in a single connector * Signal contacts for hardware management * Blind mating * Sequential mating * Large Surface Area Contact Mating System * Wide variety of accessories * Customer specified contact arrangements FEATURES: Three performance levels available: professional quality, military quality and space-flight quality provide multiple performance to cost choices * Options include thermocouple contacts, filtered, environmentally sealed and dual port package including mixed density * Broad selection of accessories Rectangular Circular Contact Sizes: 16, 20 and 22 Current Ratings: To 13 amperes Terminations: Crimp, wire solder, straight solder and right angle solder Configurations: Multiple variants in both standard and high densities Qualifications: MIL-DTL-28748, MIL-C-39029, CCITT V.35 Contact Sizes: 12, 16, 20 and 22 Current Ratings: To 25 amperes nominal Terminations: Crimp, wire solder, straight solder and right angle solder Configurations: Multiple variants in two package sizes Qualifications: Environmental protection to IP67 FEATURES: Two performance levels available: industrial quality and military quality provide two performance to cost choices * Large Surface Area Contact Mating System * A wide variety of accessories * Broad selection of contact variants and package sizes FEATURES: Non-corrodible / lightweight composite construction * EMI/RFI shielded versions * Thermocouple contacts * Environmentally sealed versions * Rear insertion/ front release of removable contacts * Two level sequential mating * Overmolding available on full assemblies Cable Hermetic All Positronic connector products can be supplied as part of cable assemblies whose technical characteristics would reflect those of the connectors being used within the assembly. Contact Sizes: 8, 12, 16, 20 and 22 Current Ratings: To 40 amperes nominal Terminations: Feed through is standard; flying leads and board mount available upon request Configurations: See D-Subminiature and Circular Configurations above Qualifications: Space-D32 FEATURES: Shorten the supply chain and reduce additional costs and delays by "cablizing" * Overmolding available * Shielded and environmentally sealed versions available * Power cables and access boxes which meet the SAE J2496 specification FEATURES: Intended for use as an electrical feedthrough in high vacuum applications * Leakage rate: 1 x 10-9 mbar.l/s * Signal, power, coax and high voltage versions available * Connectors can be mounted on flange assembly per customer specification For more information, visit www.connectpositronic.com or call your nearest Positronic sales office as given on the back of this catalog.