Positronic Products
D-SubminiaturePower
Contact Sizes: 8, 20 and 22
Current Ratings: To 40
amperes nominal
Terminations: Crimp, wire solder,
straight solder, right angle solder
and straight press-fit
Configurations: Multiple
variants in both standard and
high densities
Qualifications: MIL-DTL-24308,
Goddard Space Flight 311P,
MIL-C-39029, IP65, IP67
Contact Sizes: 0, 8, 12, 16, 20
and 22
Current Ratings: To 150 amperes
Terminations: Crimp, wire solder,
straight solder, right angle solder,
straight press-fit and right angle
press-fit
Configurations: Multiple variants
in a variety of package sizes
Compliance: PICMG 2.11,
PICMG 3.0, VITA 41
FEATURES: Three performance levels available: professional
quality, military quality and space-flight quality provide
multiple performance to cost choices
•
Options include
thermocouple contacts, filtered, environmentally sealed and
dual port package including mixed density
•
Broad selection
of accessories
FEATURES: Hot swap capability • AC/DC operation in a single
connector • Signal contacts for hardware management • Blind
mating • Sequential mating • Large Surface Area Contact Mating
System • Wide variety of accessories • Customer specified
contact arrangements
CircularRectangular
Contact Sizes: 16, 20 and 22
Current Ratings: To 13 amperes
Terminations: Crimp, wire
solder, straight solder and right
angle solder
Configurations: Multiple
variants in both standard and
high densities
Qualifications: MIL-DTL-28748,
MIL-C-39029, CCITT V.35
Contact Sizes: 12, 16, 20 and 22
Current Ratings: To 25
amperes nominal
Terminations: Crimp, wire
solder, straight solder and right
angle solder
Configurations: Multiple variants
in two package sizes
Qualifications: Environmental
protection to IP67
FEATURES:
Two performance levels available: industrial
quality and military quality provide two performance to cost
choices
•
Large Surface Area Contact Mating System
•
A wide
variety of accessories
•
Broad selection of contact variants and
package sizes
FEATURES:
Non-corrodible / lightweight composite construction
•
EMI/RFI shielded versions
•
Thermocouple contacts
•
Environmentally sealed versions
•
Rear insertion/ front release
of removable contacts
•
Two level sequential mating
•
Overmolding available on full assemblies
Cable Hermetic
Contact Sizes: 8, 12, 16, 20
and 22
Current Ratings: To 40
amperes nominal
Terminations: Feed through is
standard; flying leads and board
mount available upon request
Configurations: See
D-Subminiature and Circular
Configurations above
Qualifications: Space-D32
All Positronic connector products
can be supplied as part of cable
assemblies whose technical
characteristics would reflect
those of the connectors being
used within the assembly.
FEATURES:
Shorten the supply chain and reduce additional
costs and delays by “cablizing”
•
Overmolding available
•
Shielded and environmentally sealed versions available
•
Power cables and access boxes which meet the SAE J2496
specification
FEATURES:
Intended for use as an electrical feedthrough in
high vacuum applications
•
Leakage rate: 1 x 10-9 mbar.l/s
•
Signal, power, coax and high voltage versions available
•
Connectors can be mounted on flange assembly per
customer specification
POSITRONIC INDUSTRIES
For more information, visit www.connectpositronic.com or call your nearest
Positronic sales office as given on the back of this catalog.
