Tektronix
Same Day Shipments For Product In Stock ALLIED
c
1013
TekTools Accessories
A621 1000 Amp AC Current Probe/BNC
This industrial style clamp-on probe has a BNC connector and a shrouded banana plug adapter so it can be used on digital multimeters,
TekMeter
ª
, and scopes. The A621 can measure AC currents from 100 milliamps to 2000 amps peak over a frequency range of 5 Hz to
50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each amp measured.
700-0640. Model A621 ....................................................................................................................................................................EACH 475.00
A622 100 Amp AC Current Probe/BNC
This Òlong noseÓ style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector
and a shrouded banana plug adapter so it can also be used on digital multimeters and TekMeter. The A622 can measure AC/DC currents
from 50 mA to 100 amps peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each amp measured.
700-0622. Model A622 ....................................................................................................................................................................EACH 495.00
P5102 High Voltage Probe
100 MHz, high voltage probe for TekScope. Safety certified for up to 1000 volts and with the TekScope, can be floated safely to 600 volts
700-0760. P5102 .............................................................................................................................................................................EACH 250.00
THS7CHG Battery Charger
Battery charger for the THS7BAT. This will provide a complete recharge in the THS7BAT in less than 2 hours. Also included is an adapter to
plug the charger into 12 volt cigarette lighter.
700-0730. THS7CHG........................................................................................................................................................................EACH 325.29
THS7BAT Battery Pack
The rechargeable NiCad battery pack is specifically designed for the TekScope. Used with the battery included in the TekScope and the
recharger (THS7CHG) the user will always have a charged battery for operation of the TekScope. The battery pack will provide power for
TekScope for longer than it takes to recharge the second battery pack.
700-0725. THS7BAT ........................................................................................................................................................................EACH 90.00
THS7HCA Hard Case
The hard case is designed for safe transport of the TekScope and has room to also include the HC411 printer, the THS7CHG charger, an extra
battery, extra probes, both voltage and current. Safely transport your complete set-up.
700-0735. THS7HCA ........................................................................................................................................................................EACH 295.00
ATLDX1 Deluxe Lead Set
The deluxe lead set consists of a deluxe plug-on probe set and red and black silicon cables.
700-0400. Model ATLDX1................................................................................................................................................................EACH 80.00
Probes, Tracker and Accessories
1103 Active Probe
The 1103 TEKPROBE
ª
Power Supply provides power for up
to two P6205 Probes or other compatible probes. Also
powers ADA400A Active Differential Probe.
700-1103. 1103 .............................................EACH 1295.00
AC Current Probes A6304XL Current Probe
c
8 Meter Cable
c
500 Amps
c
DC to 2 MHz
The A6304XL is for use with the AM 503B Current Probe
Amplifier and is an AC/DC probe with a bandwidth of DC to 2
MHz. The probe is rated for 500 amps continuous and 700 amps peak. It comes with an 8 meter cable
and a carrying case.
700-6304. A6304XL ..............................................................................................................EACH 2595.00
Tektronix TR 210 Huntron Tracker
TCP202 DC Coupled Current Probe
CT-1
c
25 kHz to 1 GHz
c
Maximum Pulse Current: 12 A
c
Maximum CW Current: 450 mA
c
For 50 ½ Input
c
AC Only
c
Solid Core
c
ESD Testing
700-6200. CT-1.............................EACH 395.00
CT-2
c
1.2 kHz to 200 MHz
c
Maximum Pulse Current: 36 A
c
Maximum CW Current: 2.5 A
c
For 50 ½ Input
c
AC Only
c
Solid Core
c
Disk Driver Read/Write Signals
700-6201. CT-2.............................EACH 389.00
Features
c
Test CMOS and MOS Circuits and PLCs
c
Ability to Test Components without Power Ñ Ideal for Catastrophic Failures
c
Ability to Provide a Snapshot of a ComponentÕs Overall Health, Including Intermittent Problems
c
Built-In Pulse Generator to Test Gate-Fired Devices
c
Non-Destructive Testing
Now you can extend the power of your TDS series oscilloscope with the Tektronix
¨
TR 210 Huntron
Tracker. This remarkable tracker simplifies the testing of newer technology components while giving you
a unique current-voltage analog signature that represents the overall health of a tested device.
Test Frequencies: 50-60 Hz, 200 Hz, 2 kHz. Functions: Range selection, high range lockout. Compare-
A-Trace: 0.5-10 Hz. Pulse Level: 0.5-5 V. DC Mode: +DC or ÐDC. Pulse Mode: +Pulse, ÐPulse or both.
Power Requirements: 100 VAC, 115 VAC, 230 VAC; 47-63 Hz.
700-0004. TR 210 ...............................................................................................................EACH 1050.00
c
Probe Connects Directly to TDS Scope through TEKPROBE
ª
Interface
c
DC to 50 MHz Bandwidth
c
15 Amps DC + Peak AC Current
c
50 Amps Peak Pulse Current
c
500 ´10
Ð6
Amp * Sec Product
c
UL, CSA, CE Marking
When combined with a Tektronix TDS oscilloscope, the TCP202 enables users to make direct readout
DC and AC current measurements, resulting in accurate displayed and recorded measurements. The
TCP202 is a general-purpose probe for displaying and measuring current in electronic circuits. It is ideal
for power supply and motor drive design, and for device testing.
700-0202. TCP202 ................................................................................................................EACH 1595.00
Printer, Cart
c
For All Portable Instruments
c
Sturdy and Mobile Platform
c
Enhances Sharing and Work Space
c
Tiltable Top Tray
c
Locking Front Casters
c
Four Outlet U.S. Power Strip Option
Low Cost Portability. The K212 column and trays are made from
high-strength aluminum; the base is thermoset polyester. Physical
Characteristics. Dimensions. Width: Overall Cart Ñ
435 mm/17.0"; Shelf Ñ 407 mm/16.0". Height: Overall Cart Ñ
840 mm/33.0". Depth: Overall Cart Ñ 550 mm/21.6"; Shelf Ñ
352 mm/14.0". Weight: 9 kg; 20 lb.
700-0212. K212...........................................................EACH 479.00
16
