Coil type EMI Filters Coil type EMI Filters (Digital Noise Filters) Type: ELKE Features 3218 case size, 6 A rated current (ELKEA) and 2 A rated current (ELKE). High ESD suppression with varistor and included coils. No variation in attenuation characteristics as current changes. The stable P/N marking using laser technology makes the part number check easier. Recommended Applications Data lines, secondary power supply lines (DC lines) for game, digital AV and communications equipment. Explanation of Part Numbers [ELKE, ELKEA Series] 1 2 3 4 5 6 7 8 9 10 E L K E A 1 0 3 F A Model Type Product Code E 3218 (1207) A 6 A model size : mm (inch) Nil 2 A model Capacitance Packaging Design No. A Use only for reflow soldering F Embossed Carrier Taping [ELKEV Series] 1 2 3 4 5 6 7 8 9 10 E L K E V 3 5 2 F C Model Type Product Code E 3218 (1207) V Included varistor Capacitance Packaging Design No. F Embossed Carrier Taping size : mm (inch) Circuit voltage F 15 V E 12 V C 5V Construction 1 2 3 No. Part Name Material 1 Enclosure PPS resin mixed with ferrite powder 2 Coil 3 Terminal 4 Capacitor Copper alloy plate Copper alloy plate with SnCu Chip capacitor 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - 255 - 00 Sep. 2010 Coil type EMI Filters Dimensions in mm (not to scale) Land Pattern in mm (not to scale) 2.6 0.7 1.8 2.2 P/N, Date Code 0.8 2.3 3.2 0.8 2.2 5.0 0.8 1.8 Packaging state Content indication Top tape Embossed carrier tape Reel Reel Terminal Product Pocket Product Empty Pocket Reel Size : 178 Q'ty : 2000 pcs./Reel Packaging : Embossed Carrier Taping Leader tape Pulling direction Soldering conditions for reflow Temp. (C) 300 260 C max. 230 C 200 180 C 150 C 100 0 60 to 120 s 30 to 40 s Time Storage Conditions Package : Normal temperature (-5 to 35 C), normal humidity (85 %RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. Operating Temperature : -20 to +85 C Storage Period Solderability may be reduced due to the conditions of high temperature and high humidity which causes the oxidation of tin-plated terminals. Even if storage conditions are within specified limits, solderability may be reduced with the passage of time. Therefore, please control the storage conditions and try to use the product within 6 months of receipt. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - 256 - 00 Sep. 2010 Coil type EMI Filters Large Current Coil type EMI Filters (Digital Noise Filters) SMD ELKEA Type: Features 3218 case size, 6 A rated current. No variation in attenuation characteristics as current changes. The stable P/N marking using laser technology makes the part number check easier. Typical Specification Operating temperature : -20 to +85 C Rated Voltage : DC 50 V (Except ELKEA333FA : DC25 V) Rated Current : DC 6 A Reliability characteristics endurance (High Temp.) Soldering condition (reflow) : 85 C 50 V 6 A 1000 h (Spec : 500 h) Standard Parts Cut off frequency (MHz) Part No. ELKEA100FA ELKEA220FA ELKEA470FA ELKEA101FA ELKEA221FA ELKEA471FA ELKEA102FA ELKEA222FA ELKEA103FA ELKEA333FA Inner Capacitance (pF typ.) 500 300 150 70 30 15 7 3 0.5/DC 0.2/DC Rated Voltage (V) 10 22 47 100 220 470 1000 2200 10000 33000 Rated Current (A) 50 min. Packaging unit (pcs.) Indication 100 220 470 101 221 471 102 222 103 333 6.0 25 Indication 2 2000 Indication 1 Indication 2 note1 : 4th letter () of marking indicates the Month Code. note2 : Indication 1, 2 refer to Indication examples. Performance characteristics (Reference) Equivalent circuit, measurement block diagram ELKEAFA 10 0 100 -20 103 221 471 L 102 333 -30 L C 50 222 220 470 101 50 Attenuation (dB) -10 VV SG -40 -50 -60 1 10 100 Frequency (MHz) 1000 10000 Indication Examples Top View Side View 103P Indication 2 ELKEA103FA 222P Indication 1 ELKEA100FA ELKEA220FA ELKEA470FA ELKEA101FA ELKEA221FA ELKEA471FA ELKEA102FA ELKEA222FA ELKEA333FA 103P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - 257 - 00 Sep. 2010 Coil type EMI Filters Coil type EMI Filters (Digital Noise Filters) SMD ELKE Type: Features 3218 case size, 2 A rated current. No variation in attenuation characteristics as current changes. The stable P/N marking using laser technology makes the part number check easier. Typical Specification Operating temperature : -20 to +85 C Rated Voltage : DC 50 V (Except ELKE333FA : DC25 V) Rated Current : DC 2 A Reliability characteristics endurance (High Temp.) Soldering condition (reflow) : 85 C 50 V 2 A 1000 h (Spec : 500 h) Standard Parts Cut off frequency (MHz) Part No. ELKE100FA ELKE220FA ELKE470FA ELKE101FA ELKE221FA ELKE471FA ELKE102FA ELKE222FA ELKE103FA ELKE333FA Inner Capacitance (pF typ.) 250 200 100 50 25 10 5 2 0.5/DC 0.2/DC Rated Voltage (V) 10 22 47 100 220 470 1000 2200 10000 33000 50 Rated Current (A) Indication min. Packaging unit (pcs.) 2.0 100 220 470 101 221 471 102 222 103 333 2000 25 note1 : 4th letter () of marking indicates the Month Code. Performance characteristics (Reference) Equivalent circuit, measurement block diagram ELKEFA 10 0 -20 103 -30 221 471 L 220 470 SG 333 L C 50 Attenuation (dB) 222 100 101 50 102 -10 VV -40 -50 -60 1 10 100 Frequency (MHz) 1000 10000 Indication Examples 103P (Top View) (Side View) 103P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - 258 - 00 Sep. 2010 Coil type EMI Filters Varistor included Coil type EMI Filters (Digital Noise Filters) SMD Type: ELKEV Features High ESD suppression with varistor and included coils. No variation in attenuation characteristics as current changes. The stable P/N marking using laser technology makes the part number check easier. Typical Specification Operating temperature : -20 to +85 C Rated Voltage : Applicable normal voltage for varistor Rated Current : DC 2 A Reliability characteristics endurance (High Temp.) Soldering condition (reflow) : 85 C 50 V 2 A 1000 h (Spec : 500 h) Standard Parts Cut off frequency Inner Capacitance (MHz) (pF typ.) Part No. ELKEV150FF ELKEV300FF ELKEV161FF ELKEV431FF ELKEV561FE ELKEV112FC ELKEV352FC 250 200 50 20 10 8 1/DC 15 30 160 430 560 1050 3500 Rated Voltage (V) 27 27 27 27 22 12 12 Applicable circuit voltage (V max.) 15 15 15 15 12 5 5 min. Packaging unit (pcs.) Indication 2.0 150 300 161 431 561 112 352 2000 Note1 : 4th letter () of marking indicates the Month Code. Performance characteristics (Reference) Equivalent circuit, measurement block diagram ELKEVF 10 0 102 161 SG C 50 300 561 -20 L 150 431 50 Attenuation (dB) L -10 VV 352 -30 -40 -50 1 10 100 Frequency (MHz) 1000 10000 Indication Examples 352P 352P Month Code : 1 Letter Inner Capacitance : 3 Letters Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - 259 - 00 Sep. 2010 Coil type EMI Filters Safety Precautions The following are precautions for individual products. Please also refer to the common precautions shown on page 4 of this catalog. 1. Operation range and environments 1 These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric applianc es, offi ce equipment, information and com mu nication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. * In liquid, such as water, oil, chemicals, or organic solvent * In direct sunlight, outdoors, or in dust * In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 * In an environment where these products cause dew condensation 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive schock can damage the part. 3. Land pattern design 1 Please refer to the recommended land pattern for each type shown on the datasheet. 2 In case of reflow soldering, consider the layout because taller components close to EMI filters tend to block thermal conduction. 4. Mounting 1 Avoid excessive placement force. 2 Do not bend or twist the PWB after mounting the part. 5. Cleaning 1 Do not use acid or alkali agents. Some cleaning solvents may damage the part. Confirm by testing the reliability in advance of mass production. 2 If Ultrasonic cleaning is used, please confirm the reliability in advance. It is possible that combined resonance of component and PWB and cavitation can cause an abnormal vibration mode to exist causing damage. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - 260 - 00 Sep. 2010