Surface mount type OS-CON Line-up Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability Technical data Series system diagram Selection guide Guidelines and precautions for use SVPSeries SVP sets the standard for our SMD version of the OS-CON product line. Recommended for your SMD needs in switching power supplies. This product can support lead free-reflow.2 Specifications Items Condition (V) - 2.5 4.0 6.3 10 16 20 25 Surge voltage (V) Room temperature 3.3 5.2 8.2 12 18 23 25 Category temperature range () Dissipation Factor (DF) SVPE Leakage current1 Surface mount type SVPF SVPD SVPC SVPB SVPA SVQP Specifications Rated voltage Capacitance tolerance SVPS M : 20 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 2 minutes Please see the attached characteristics list 100kHz to 300kHz/20 Please see the attached characteristics list Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. -55 to 105 - 120Hz/20 () Based the value at 100kHz, 20 105 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit 105, 2,000h, Rated voltage applied (25V 20V applied) Endurance Radial lead type SEPC SEQP SEP Resistance to soldering LC Within the initial limit C/C Within 20% of the initial value 60, 90 to 95%RH, 1,000h, No applied voltage Damp heat(Steady state) heat2 0.75 to 1.25 -55 Z/Z20 SVP SVP SEPF RoHS compliance Standard DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 10% of the initial value DF Within 1.3 times of the initial limit VPS (230 X 75s) ESR Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) 1 In case of some problems for measured values, measure after applying rated voltage for 2.5 to 20V products or 20V for 25V products for 120 minutes at 105. 2 Please refer to page 14 for reflow soldering conditions. (unit : mm) 82 16 Case No. Series A5, B6, C6 size has no marking E7, F8, E12, F12 size is SVP Rated capacitance Rated voltage P C SVP W H 003 0.2max D Polarity marking Cathode L R Size list F RV 3.3 4.7 6.8 10 15 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 470 560 680 820 1,200 1,500 50 Size code D 0.5 A5 B6 C6 E7 F8 E12 F12 4.0 5.0 6.3 8.0 10.0 8.0 10.0 RV : Rated voltage 2.5 4.0 6.3 A5 A5 B6 B6 C6 C6 E12 F12 E12 F8 F12 A5 A5 A5 A5 B6 B6 C6 C6 C6 E7,F8 E7 10 F8 F8,E12 F12 C6 C6 E7 E7,F8 F8 F8,E12 F12 16 20 25 B6 C6 E7 C6 C6 E7 E12 A5 B6 B6 C6 E7 E7 F8 F8 F8,E12 F12 E7 F8 F8 E12 F12 0.1 L -0.4 5.4 5.9 5.9 6.9 7.9 11.9 12.6 W 0.2 H 0.2 C 0.2 R P 0.2 4.3 5.3 6.6 8.3 10.3 8.3 10.3 4.3 5.3 6.6 8.3 10.3 8.3 10.3 5.0 6.0 7.3 9.0 11.0 9.0 11.0 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.6 to 0.8 0.8 to 1.1 0.8 to 1.1 1.0 1.4 2.1 3.2 4.6 3.2 4.6 Recommended land pattern dimension of PWB c Marking and dimensions F8 a b F12 (unit : mm) Size code a b A5 1.0 6.2 1.6 c B6 1.4 7.4 1.6 C6 2.1 9.1 1.6 E7 2.8 11.1 1.9 F8 4.3 13.1 1.9 E12 2.8 11.1 1.9 F12 4.3 13.1 1.9 Rated voltage (V) Part number 16 10 10 10 10 6.3 4.0 20 16 16 10 6.3 4.0 4.0 25 20 20 16 10 10 6.3 6.3 6.3 4.0 2.5 25 20 20 16 16 10 10 6.3 4.0 25 20 20 16 16 16 10 10 10 6.3 6.3 6.3 4.0 25 20 16 10 6.3 4.0 2.5 25 20 16 10 6.3 4.0 2.5 16SVP3R3M 10SVP4R7M 10SVP6R8M 10SVP10M 10SVP15M 6SVP22M 4SVP33M 20SVP10M 16SVP15M 16SVP22M 10SVP33M 6SVP47M 4SVP39M 4SVP68M 25SVP6R8M1 20SVP22M 20SVP27M 16SVP39M 10SVP47M 10SVP56M 6SVP82M 6SVP100M 6SVP120MV 4SVP150MX 2R5SVP220M 25SVP10M1 20SVP33M 20SVP47M 16SVP56M 16SVP82M 10SVP120M 10SVP150MX 6SVP220MX 4SVP330M 25SVP22M1 20SVP56M 20SVP68M 16SVP100M 16SVP150M 16SVP180MX 10SVP150M 10SVP270M 10SVP330MX 6SVP220M 6SVP330M 6SVP470MX 4SVP680M 25SVP33M1 20SVP100M 16SVP180M 10SVP330M 6SVP470M 4SVP560M 2R5SVP680M 25SVP56M1 20SVP150M 16SVP330M 10SVP560M 6SVP820M 4SVP1200M 2R5SVP1500M Rated capacitance (F) ESR(m) (max) 100kHz to 300kHz/20 3.3 4.7 6.8 10 15 22 33 10 15 22 33 47 39 68 6.8 22 27 39 47 56 82 100 120 150 220 10 33 47 56 82 120 150 220 330 22 56 68 100 150 180 150 270 330 220 330 470 680 33 100 180 330 470 560 680 56 150 330 560 820 1200 1500 Rated ripple current 100kHz (mArms) at 105 DF (% max) Leakage current (A)(max) After 2 minutes 260 240 240 220 200 200 200 120 120 90 70 70 70 60 80 60 60 50 50 45 45 40 17 40 23 60 45 45 45 40 35 35 35 35 50 40 40 35 30 30 30 25 25 25 25 25 25 30 24 20 17 15 13 13 28 20 16 13 12 12 12 660 7 670 8 670 9 700 10 A5 740 10 740 12 740 15 1020 10 1020 10 1060 10 1100 12 B6 1100 12 1100 12 1400 12 1200 10 1450 10 1450 10 1620 10 1620 12 C6 1700 12 1700 12 1810 12 2780 12 1810 12 2390 12 1500 10 1890 12 1890 12 1890 12 2120 12 E7 2560 12 2560 12 2560 12 2560 12 2000 10 2400 12 2400 12 2670 12 3020 12 3020 12 3020 12 F8 3700 12 3700 12 3700 12 3700 12 3700 12 3700 12 2980 12 3320 15 3640 15 E12 3950 15 4210 15 4520 15 4520 15 3800 12 4320 15 4720 15 5230 15 F12 5440 15 5440 18 5440 18 1 The surge voltage of 25V products is 25V. Please consider SVPD series 25V products (whose surge voltage is 29V) in placing a 26.4 23.5 34 50 75 69.3 66 100 120 176 165 148 78 136 85 88 108 125 94 112 103 126 151 120 110 125 132 188 179 262 240 300 277 264 275 224 272 320 480 576 300 540 660 277 416 592 544 413 400 576 660 592 448 340 700 600 792 840 775 960 750 new order. Selection guide Size code Technical data SVP series characteristics list Guidelines and precautions for use Series system diagram Image of case size Products list Packing specifications SMD type Packing specifications Radial lead type Recommended soldering condition Fundamental structure Characteristics Reliability SVPF SVPE Surface mount type SVP Series SVPS SVPD SVPC SVPB SVPA SVQP SVP SVP SEPF Radial lead type Surface mount type OS-CON Line-up SEPC SEQP SEP Frequency coefficient for ripple current Frequency Coefficient 120Hz < f < 1kHz 0.05 1kHz < f < 10kHz 0.3 10kHz < f < 100kHz 0.7 100kHz < f < 500kHz 1 51