79205 - Desco - Datasheet.Directory

TB-3010 April 2018 Page 1 of 4

ESD Tape Applications

Roll Length: 36 yards (1" core); 72 yards (3" core)

Total Thickness: 2.4 mil 0.0024". (0.06mm)

Elongation: 22.5%

Tensile Strength: 22 lbs/in

Adhesion Strength: 59oz/in2

Static Generation from conductive plate:

(73°F, 45% RH): 80 volts average

Static Generation from roll:

(73°F, 45% RH): 50 volts average

Available on paper cores and plastic cores

No Sulfur, sufactants, amines, or silicone based material

(adhesive, film backing, release material) is used in the

manufacture of Wescorp cellulose tape.

Applications for ESD Clear Cellulose Tape with and

without Symbols

• Sealing ESD bags and other ESD packaging\

containers

• Use with ESD symbols for ESD awareness

• General purpose ESD tape applications

• Secure (bundle) IC DIP tubes

• Prevents damage to sensitive electronic components in

manufacturing

• Ideal for holding notes, work orders or instructions in

offices, ESD workstations, or for general purpose

• Ideal for conformal coating or holding and sealing supplies

in manufacturing

• Ideal in packaging for container sealing, static shielding

bag closure and holding DIP tubes

Applications for ESD Clear Cellulose Tape with Symbols

• Identification or making product / paperwork /

processes

• High visibility with ESD susceptibility symbol for increased

awareness

• Attach paperwork to bags or to ESD susceptible

product

• Ideal in packaging for container sealing, static shielding

bag closure and holding IC DIP tubes

Note: Tape widths are metric (it applys to all 4 tape types).

Tape widths are nominal metric ±0.8 mm (±1/32")

• 1/4" is 6 mm nominal or 0.236"

• 1/2" is 12 mm nominal or 0.472"

• 3/4" is 18 mm nominal or 0.709"

• 1" is 24 mm nominal or 0.945"

In ESD protected areas, replace regular high charging tape

with Wescorp ESD Tape. ANSI/ESD S20.20 section 8.3.1.

states “All nonessential insulators, such as those made of

plastics and paper (e.g., coffee cups, food wrappers and

personal items) must be removed from the workstation.”

Wescorp ESD Cellulose Tape Line

Technical Information for ESD Cellulose Tape

Film Thickness: 1.9 mil (0.048 mm)

Film construction: Cellulose

Adhesive: Rubber based - non-staining, absorbs moisture

Film surface resistance: 1 x 109 to < 1 x 1011 ohms per

ANSI/ESD STM11.11

Temperature Range: -10°C to 71°C (14°F to 160°F )

100°C for 10 minutes max

Color: Transparent

Wescorp ESD Tapes

Employee Owned

DESCO INDUSTRIES INC - Technical Bulletin TB-3010

DESCO INDUSTRIES INC • 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Web Site: DescoIndustries.com

RoHS, REACH, and Conﬂ ict Minerals Statement

See the Desco Industries RoHS, REACH, and Conflict Minerals

Statement:

Descoindustries.com/ROHS.aspx

See the Desco Limited Warranty:

Desco.Descoindustries.com/Limited-Warranty.aspx

See the Desco Disclaimer:

Desco.Descoindustries.com/Disclaimer.aspx

TB-3010 Page 2 of 4

Wescorp ESD Conductive Shielding Grid Tape

Technical Information for Conductive Shielding Grid

Tape

Both surfaces non-tribocharging at 50% RH

Thickness: 1.9 mil 0.0019", (0.048mm)

Adhesive: acrylic based

Conductive grid layer (50% RH): 1 x 104 to < 1 x 106 ohms

per ANSI/ESD STM11.11

Adhesive copolymer resistivity: 109 ohms typical

Copolymer layer resistivity: 1012 ohms typical

Max Temperature: 140°F (60°C)

Absence of shed, crack, chip, or rub off

Non-corrosive

No silicone based material (adhesive, film backing, releas

material) is used in the manufacture of Wescorp conductive

shielding grid tape.

Applications for Conductive Shielding Grid Tape

• For applications requiring EMI shielding

• Use in areas where the generation of static electricity is of

concern

• Using grounded Tape Dispenser, voltage generated

by unrolling will effectively be reduced to approaching

zero

• Secure (bundle) IC tubes

• Cover external plugs, holes or connector pins on electronic

chassis (black boxes, etc.) during transporta tion or storage

Excerpt from the Naval Aviation Schools Command: “..

Weapon Replaceable Assemblies (WRA)s shall have ESD

conductive plug caps or grid tape over all external cannon

plugs and connector pins.”

Wescorp ESD High-Temp Masking Tape

Technical Information for High-Temp Masking Tape

Backing: Saturated, high strength crepe paper

Adhesive: Natural rubber based, non-staining, solvent

spread, cured

Thickness: 7 mils (0.007") (0.18 mm)

Adhesion Strength: 38 N/100 mm / 35 oz/in2

Tensile Strength: 385 N/100 mm / 22 lbs/in2

Temperature Resistance: 302°F (150°C) - 60 minutes

Color: Natural

Meets CDN Spec.: 53.79-94 Type 1

Meets US Spec.: A-A 883-B-Type 1

Roll Length: 55 meters (60 yards)

Thickness: 7.0 mils 0.007",(0.18 mm)

Adhesion to Steel: 1.51 newtons/cm2 / 35 oz/inch2

Elongation: 8%

Moisture Resistance: fair

Solvent Resistance: good

Storage Stability: excellent

Temperature Range: -32°F to + 275°F (-36°C to + 135°C)

Max Temp: 275°F (135°C) 45 minutes maximum

Government Specs: PPP-T-42C

Type 1, CID-AA-883A Type 1

Waterproof

Tribocharges, but no charge retention (recommend slow

unrolling utilizing an ionizer to neutralize charges);

recomend slow unwinding utilizing an ionizer to neutralize

charges

Adhesive surface resistance: 1011 ohms typical per ANSI/

ESD STM11.11

Non-toxic, and pH neutral

Non-corrosive

Employee Owned

DESCO INDUSTRIES INC • 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Web Site: DescoIndustries.com

TB-3010 Page 3 of 4

Normal use of our High Temperature Masking Tape is for

masking or protective applications on printed circuit boards

not exceeding temperatures of 150°C (302°F) at a duration

under 45 minutes. If the tape is used for masking operations

or temporary protection, it should not be left on the product

for more than 24 hours. For best results, the tape should

not be exposed to ultraviolet rays or high temperature for

prolonged periods of time (beyond manufacturer’s specs).

This tape is non-staining under normal use as described

above.

Applications for High-Temp Masking Tape

• Silk screening applications

• Masking application in spray and brush painting,

non-staining

• Protective purposes in manufac turing processes, strips

clean

• For securing polyethylene sheeting to walls during painting

• For OEM repair shops

• Use in applications masking PCBs gold features for wave

soldering or soldering under 302°F (150°C)

• For best results, apply to board using a rubber roller.

• Thick conductive adhesive excellent for conformability to

protect critical PCB features

• Easily handles high temperatures of wave soldering

without leaving significant residue

• Handles temperatures found in test and burn-in ovens

Wescorp ESD High Temp Polyimide Tape

Technical Information for ESD High Temp Polyimide

Tape

Removal leaves little or no residue

Adhesive surface resistance: 1 x 102 to < 1 x 105 ohms per

ANI/ESD STM11.11

Max Temperature: 572°F (300°C) 10 seconds

Adhesive Strength: 1 N/cm (DIN), 5 oz/inch2 (ASTM)

Polyimide Film (DuPont’s Kapton® or equivalent)

Film Thickness: 1.0 mil (0.001") (0.0254 mm)

Conductive Silicone Adhesive

Overall Thickness: 1.4 mil (0.0014" (0.0356 mm)

Total Thickness: 2.4 mil (0.0024") (0.060 mm)

Color: Brown Opaque

Tensile Strength: 50 N/cm (DIN), 28 lbs/in2 (ASTM)

Elongation: 70% (DIN & ASTM)

Static Charge Generation (300 mm/min):

Removal from Core (23°C, 50% RH):

5 volts, Internal Test Method

Removal from stainless steel (50% RH):

5 volts, Internal Test Method

Passed flammability per NASA STD 6001, Test 1 and

Hypergol ignition and penetration testing for casual contact

per MTB-175-88

For best results, apply to board using a rubber roller.

Applications for High-Temp Polyimide Tape

• Ideal for masking gold leads and other components

on boards populated with sensitive integrated

circuits

• Thick conductive adhesive excellent for conformability to

protect critical PCB features

• Near zero voltage generation when tape unrolled from

roll [at 50% relative humidity]

• Near zero voltage generation when tape removed from

PCB [at 50% relative humidity]

• Masking off PCBs for IR reflow ovens or wave soldering

under 572°F (300°C) ~ 10 seconds

Note: ESD High Temp Polymide Tape with conductive

acrylic, adhesive (silicone free) is available as a special

order.

Applications for Aisle Marking Tape

• Use to mark off floors designating ESD Protective Areas

• Can be used as area signs

• Note: Aisle marking Tape has no ESD control properties

Employee Owned

DESCO INDUSTRIES INC • 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Web Site: DescoIndustries.com

TB-3010 Page 4 of 4

Limited Warranty, Warranty Exclusions, Limit of

Liability

See Desco's Terms and Conditions -

Desco.DescoIndustries.com/TermsAndConditions.aspx

Tape Dispenser

2 inch wide ESD Tape Dispenser

• Use with Wescorp ESD tapes

• For tape with 3" (7.62 cm) Cores

• For tapes rolls up to 2" (48 mm) wide (or combination of

rolls)

• Groundable chassis with included ground cord

Wescorp Tape Storage:

For best results, tape inventory should be continually

replenished. It is recommended that rolls of tape be stored

flat and rotated (flipped over to the other side) periodically.

Tapes should be stored in a dry, well ventilated room with

a reasonably consistent temperature of 68°F (20°C) and be

protected from exposure to direct sunlight. Tape should not

be stored in ultraviolet sunlight, moisture, or heat. Tape over

one year old should be evaluated by the user to determine

acceptability for the user’s application.

Employee Owned

DESCO INDUSTRIES INC • 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178 • Web Site: DescoIndustries.com