SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE DEVICE, LEAD-FREE
LOW-FIRE-HAZARD SHIELD
TERMINATION LOW TEMPERATURE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets] DOCUMENT NO.: B-155-XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
PROD. REV.:
SEE TABLE DOC. ISSUE:
1 DATE:
30-Jun-05
PREPARED BY:
mforonda DCR NUMBER:
D050170 REPLACES:
--- CAGE CODE :
06090 SCALE:
--- SIZE:
A SHEET:
1 of 1
© 2005 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Product Dimensions Cable Dimensions
Product Name øA
min øB
min L
max D
max øE
min øF
min øG
max H±0.5
[±0.020] J±0.5
[±0.020]
Qty:
Item 2
B-155-03 A 2.5
[0.098] 3.0
[0.118] 24.5
[0.964] 3.0
[0.118] 1.5
[0.059] 1.0
[0.039] 2.5
[0.098] 6.0
[0.236] 7.0
[0.275] 1
B-155-05 A 4.3
[0.169] 4.8
[0.189] 29.3
[1.153] 4.8
[0.189] 2.0
[0.078] 1.5
[0.059] 4.3
[0.169] 8.0
[0.315] 9.0
[0.354] 1
B-155-06 A 6.0
[0.236] 6.70
[0.264] 32.00
[1.260] 6.70
[0.264] 3.30
[0.130] 2.80
[0.110] 6.00
[0.236] 9.0
[0.354] 10.0
[0.394] 1
B-155-07 A 6.8
[0.267] 7.3
[0.287] 32.5
[1.279] 7.3
[0.287] 3.3
[0.130] 2.8
[0.110] 6.8
[0.267] 10.0
[0.393) 11.0
[0.433] 1
B-155-09 A 8.70
[0.343] 9.20
[0.362] 35.50
[1.398] 9.20
[0.362] 4.50
[0.177] 4.00
[0.157] 8.70
[0.343] 11.0
[0.433] 12.0
[0.472] 2
B-155-11 A 10.8
[0.425] 11.5
[0.452] 35.5
[1.397] 11.5
[0.452] 4.5
[0.177] 4.0
[0.157] 10.8
[0.425] 12.0
[0.472] 13.0
[0.512] 2
B-155-13 A 13.0
[0.512] 15.1
[0.594] 45.5
[1.790] 15.1
[0.594] 7.0
[0.275] 6.5
[0.256] 13.0
[0.512] 16.0
[0.630] 17.0
[0.669] 3
B-155-17 A 17.0
[0.669] 19.0
[0.748] 55.5
[2.165] 18.0
[0.748] 9.0
[0.354] 8.0
[0.315] 16.0
[0.630] 21.0
[0.827] 23.0
[0.905] 2
B-155-23 A 22.5
[0.885] 24.5
[0.964] 80.0
[3.149] 23.5
[0.925] 12.0
[0.472] 11.0
[0.433] 21.5
[0.846] 29.0
[1.142] 31.0
[1.220] 2
B-155-33 A 33.0
[1.299] 35.0
[1.380] 80.0
[3.149] 34.0
[1.338] 19.0
[0.748] 17.0
[0.689] 32.0
[1.259] 29.0
[1.142] 31.0
[1.220] 3
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX. Qty: see table (one solder washer shown).
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic.
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85°C.
2. Temperature range: -55°C to +125°C.
3. When installed properly, it will meet the performance requirements of Tyco Electronics / Raychem Specification RT-1404.
4. For installation procedure and application equipment, consult RPIP-688-00.
For best results, prepare
the cable as shown:
