Pb
RoHS
EMDS13E2J-176.83816M TR
EMDS13 E 2 J -176.83816M TR
Series
RoHS Compliant (Pb-free) 3.3V 6 Pad 5mm x 7mm
Plastic SMD LVDS MEMS Oscillator
Frequency Tolerance/Stability
±25ppm Maximum over 0°C to +70°C
Duty Cycle
50 ±5(%)
Packaging Options
Tape & Reel
Nominal Frequency
176.83816MHz
Logic Control / Additional Output
Standby (ST) and Complementary Output
ELECTRICAL SPECIFICATIONS
Nominal Frequency 176.83816MHz
Frequency Tolerance/Stability ±25ppm Maximum over 0°C to +70°C (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency
Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year
Aging at 25°C, Reflow, Shock, and Vibration)
Aging at 25°C ±1ppm First Year Maximum
Supply Voltage +3.3Vdc ±0.3Vdc
Input Current 80mA Maximum (Excluding Load Termination Current)
Output Voltage Logic High (Voh) 1.425Vdc Typical
Output Voltage Logic Low (Vol) 1.075Vdc Typical
Differential Output Voltage (Vod) 247mVdc Minimum, 350mVdc Typical, 454mVdc Maximum
Offset Voltage (Vos) 1.125V Minimum, 1.250V Typical, 1.375V Maximum
Rise/Fall Time 225pSec Typical, 325pSec Maximum (Measured over 20% to 80% of waveform)
Differential Output Error (dVod) 50mVdc Maximum
Duty Cycle 50 ±5(%) (Measured at 50% of waveform)
Offset Error (dVos) 50mVdc Maximum
Load Drive Capability 100 Ohms Between Output and Complementary Output
Output Logic Type LVDS
Logic Control / Additional Output Standby (ST) and Complementary Output
Output Control Input Voltage Vih of 70% of Vcc Minimum or No Connect to Enable Output and Complementary Output, Vil of 30% of Vcc
Maximum to Disable Output and Complementary Output (High Impedance)
Standby Current 30µA Maximum (ST) Without Load
Period Jitter (Deterministic) 0.2pSec Typical
Period Jitter (Random) 2.0pSec Typical
Period Jitter (RMS) 1.8pSec Typical, 2.5pSec Maximum
Period Jitter (pk-pk) 25pSec Typical, 30pSec Maximum
RMS Phase Jitter (Fj = 637kHz to
10MHz; Random) 1.6pSec Typical
RMS Phase Jitter (Fj = 1MHz to
20MHz; Random) 0.7pSec Typical
RMS Phase Jitter (Fj = 1.875MHz to
20MHz; Random) 0.6pSec Typical
Start Up Time 10mSec Maximum
Storage Temperature Range -55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility MIL-STD-883, Method 3015, Class 2, HBM 2000V
Flammability UL94-V0
Mechanical Shock MIL-STD-883, Method 2002, Condition G, 30,000G
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity Level J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003 (Six I/O Pads on bottom of package only)
Temperature Cycling MIL-STD-883, Method 1010, Condition B
www.ecliptek.com | Specification Subject to Change Without Notice | Rev C 8/13/2010 | Page 1 of 6