       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DFast Transient Response
D10-mA to 3-A Load Current
DShort Circuit Protection
DMaximum Dropout of 450-mV at 3-A Load
Current
DSeparate Bias and VIN Pins
DAvailable in Adjustable or Fixed-Output
Voltages
D5-Pin Package Allows Kelvin Sensing of
Load Voltage
DReverse Current Protection
description
The UC382 is a low-dropout-linear regulator providing a quick response to fast load changes. Combined with
its precision onboard reference, the UC382 excels at driving GTL and BTL buses. Due to its fast response to
load transients, the total capacitance required to decouple the regulator’s output can be significantly decreased
when compared to standard LDO linear regulators.
Dropout voltage (VIN to VOUT) is only 450 mV maximum at 100°C and 350 mV typical at 3-A load.
The onboard bandgap reference is stable with temperature and scaled for a 1.2-V input to the internal-power
amplifier. The UC382 is available in fixed-output voltages of 1.5 V, 2.1 V, or 2.5 V. The output voltage of the
adjustable version can be set with two external resistors. If the external resistors are omitted, the output voltage
defaults to 1.2 V.
block diagram
+
THERMAL
SHUTDOWN
1.2 V
BANDGAP
REFERENCE
R2
R1
3 5
SHORT
CIRCUIT
SENSE
2
1
4
UC382−ADJ
UC382−1 (1.5 V)
UC382−2 (2.1 V)
UC382−3 (2.5 V)
OPEN 0
2 k 500
2 k 1.5 k
2 k 2.16 k
R1 R2
ADJGND VOUT
VIN
VB
UDG-00080
Copyright 2000−2004, Texas Instruments Incorporated
   ! "#$ !  %#&'" ($)
(#"! "  !%$""! %$ *$ $!  $+! !#$!
!(( ,-) (#" %"$!!. ($!  $"$!!'- "'#($
$!.  '' %$$!)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
5-PIN TO-263
TD PACKAGE
(TOP VIEW)
5-PIN TO-220
T PACKAGE (TOP VIEW)
Note: Tab = Ground
All trademarks are the property of their respective owners.
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature (unless otherwise noted)}
VB 13 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIN 7.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage 1.2 V to 6.0 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature, Tstg −65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Junction temperature, TJ −55°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature (soldering, 10 seconds) 300°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
}Currents are positive into, negative out of the specified terminal. Consult Packaging Section of Databook for thermal limitations and
considerations of packages. AVAILABLE OPTIONS(1)
PACKAGED DEVICES
TJ
TO-220 (T) TO−263 (TD)(2)
T
JOUTPUT VOLTAGE OUTPUT VOLTAGE
1.5 V 2.1 V 2.5 V 1.2 V or ADJ 1.5 V 2.1 V 2.5 V 1.2 V or ADJ
–40°C to 100°C 282T-1 282T-2 282T-3 282T-ADJ 282TD-1 282TD-2 282TD-3 282TD-ADJ
0°C to 100°C 382T-1 382T-2 382T-3 382T-ADJ 382TD-1 382TD-2 382TD-3 382TD-ADJ
1. For more package and ordering information, see the Package Option Addendum located at the end of this data sheet.
2. For 50 piece reel, add KTTT (e.g., UC282TDKTTT−1); for 500 piece reel, add TR (e.g., UC282TDTR−1).
electrical characteristics, TA = −40°C to 100°C for the UC282-X series and 0°C to 100°C for the
UC382-X, V B = 5 V, VIN = 3.3 V, VOUT = 2.5 V for the UC382-ADJ, TA = TJ, (unless otherwise stated)
UC382-3 fixed 2.5 V, 3-A family
PARAMETERS TEST CONDITIONS MIN TYP MAX UNITS
Output voltage (IVOUT = 100 mA)
UC382-3 2.475 2.500 2.525 V
Output voltage (IVOUT = 100 mA) UC282-3 2.450 2.500 2.525 V
Load regulation IVOUT = 10 mA to 3 A 0.5 4 mV
VIN PSSR 80 100 dB
VB PSSR 50 60 dB
IVOUT = 3 A, TJ = 25°C 350 425 mV
VIN dropout voltage = VIN−VOUT IVOUT = 3 A, UC382-3 350 450 mV
VIN dropout voltage = VIN−VOUT
IVOUT = 3 A, UC282-3 350 500 mV
VB dropout = VB−VOUT
IVOUT = 3 A, UC382-3 1.8 2.10 V
VB dropout = VB−VOUT IVOUT = 3 A, UC282-3 1.8 2.20 V
Short circuit current limit 3.3 4.5 A
VB current
IVOUT = 10 mA 611 mA
VB current IVOUT = 3 A 18 60 mA
VIN current IVOUT = 3 A 2.94 2.97 A
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics, TA = −40°C to 100°C for the UC282-X series and 0°C to 100°C for the
UC382-X, V B = 5 V, VIN = 3.3 V, VOUT = 2.5 V for the UC382-ADJ, TA = TJ, (unless otherwise stated)
UC382-2 fixed 2.1 V, 3-A family
PARAMETERS TEST CONDITIONS MIN TYP MAX UNITS
Output voltage (IVOUT = 100 mA)
UC382-2 2.079 2.100 2.121 V
Output voltage (IVOUT = 100 mA) UC282-2 2.058 2.100 2.121 V
Load regulation IVOUT = 10 mA to 3 A 0.5 4 mV
VIN PSSR 80 100 dB
VB PSSR 52 62 dB
IVOUT = 3 A, TJ = 25°C 350 425 mV
VIN dropout voltage = VIN−VOUT IVOUT = 3 A, UC382-2 350 450 mV
VIN dropout voltage = VIN−VOUT
IVOUT = 3 A, UC282-2 350 500 mV
VB dropout = VB−VOUT
IVOUT = 3 A, UC382-2 1.8 2.10 V
VB dropout = VB−VOUT IVOUT = 3 A, UC282-2 1.8 2.20 V
Short circuit current limit 3.3 4.5 A
VB current
IVOUT = 10 mA 611 mA
VB current IVOUT = 3 A 18 60 mA
VIN current IVOUT = 3 A 2.94 2.97 A
UC382-1 fixed 1.5 V, 3-A family
PARAMETERS TEST CONDITIONS MIN TYP MAX UNITS
Output voltage (IVOUT = 100 mA)
UC382-1 1.485 1.500 1.515 V
Output voltage (IVOUT = 100 mA) UC282-1 1.470 1.500 1.515 V
Load regulation IVOUT = 10 mA to 3 A 0.5 4 mV
VIN PSSR 80 100 dB
VB PSSR 55 65 dB
IVOUT = 3 A, TJ = 25°C 350 425 mV
VIN dropout voltage = VIN−VOUT IVOUT = 3 A, UC382-1 350 450 mV
VIN dropout voltage = VIN−VOUT
IVOUT = 3 A, UC282-1 350 500 mV
VB dropout = VB−VOUT
IVOUT = 3 A, UC382-1 1.8 2.10 V
VB dropout = VB−VOUT IVOUT = 3 A, UC282-1 1.8 2.20 V
Short circuit current limit 3.3 4.5 A
VB current
IVOUT = 10 mA 611 mA
VB current IVOUT = 3 A 18 60 mA
VIN current IVOUT = 3 A 2.94 2.97 A
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics, TA = −40°C to 100°C for the UC282-X series and 0°C to 100°C for the
UC382-X, V B = 5 V, VIN = 3.3 V, VOUT = 2.5 V for the UC382-ADJ, TA = TJ, (unless otherwise stated)
UC382-ADJ adjustable, 3-A family
PARAMETERS TEST CONDITIONS MIN TYP MAX UNITS
ADJ voltage (IVOUT = 100 mA)
UC382-ADJ 1.188 1.200 1.212 V
ADJ voltage (IVOUT = 100 mA) UC282-ADJ 1.176 1.200 1.212 V
Load regulation IVOUT = 10 mA to 3 A 0.5 4 mV
VIN PSSR VOUT programmed for 2.5 V 80 100 dB
VB PSSR VOUT programmed for 2.5 V 50 60 dB
IVOUT = 3 A, TJ = 25°C 350 425 mV
VIN dropout voltage = VIN−VOUT IVOUT = 3 A, UC382-ADJ 350 450 mV
VIN dropout voltage = VIN−VOUT
IVOUT = 3 A, UC282-ADJ 350 500 mV
VB dropout = VB−VOUT
IVOUT = 3 A, UC382-ADJ 1.8 2.10 V
VB dropout = VB−VOUT IVOUT = 3 A, UC282-ADJ 1.8 2.20 V
Short circuit current limit 3.3 4.5 A
VB current
IVOUT = 10 mA 611 mA
VB current IVOUT = 3 A 18 60 mA
VIN current IVOUT = 3 A 2.94 2.97 A
pin descriptions
ADJ: In the adjustable version, the user programs the output voltage with two external resistors. The resistors
should be 0.1% for high accuracy. The output amplifier is configured as a non-inverting-operational amplifier.
The resistors should meet the criteria of R3 || R4 < 100 . Connect ADJ to VOUT for an output voltage of 1.2 V.
Note that the point at which the feedback network is connected to the output is the Kelvin sense point. For -1,
-2, and -3 versions, ADJ pin is tied to VOUT to obtain specified output voltage.
GND: For accurate results, the GND pin should be referenced to the load ground.
VB: Supplies power to all circuits of the regulator except the collector of the output-power transistor. The 2-V
headroom from VB to VOUT allows the use of a Darlington output stage for inherently-low-output impedance
and fast response. (Dropout is derated for junction temperatures below 0°C.)
VIN: Supplies the current to the collector of the output-power transistor only. The dropout (VIN−VOUT) is under
100 mV for light loads; maximum dropout is 450 mV at 3 A for TJ = 0°C to 100°C. (Dropout is derated for junction
temperatures over 100°C.) At full load, the majority of the VB current is going to the load.
VOUT: This pin should be connected to the load via a low impedance path. Avoid connectors which add
significant inductance and resistance. Note that even though a Kelvin sense is available through a 5-pin
package, care must be taken since voltage drops along wire traces add to the dropout voltage.
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
pin descriptions (continued)
Figure 1
DROPOUT VOLTAGE (VB − VOUT)
vs
LOAD CURRENT
3
IL− Load Current − A
210
1.7
1.8
1.9
1.6
VDO - Dropout Voltage - V
TJ = 275C
Figure 2
DROPOUT VOLTAGE (VIN − VOUT)
vs
LOAD CURRENT
3 A2 A1 A100 mA
100
200
300
400
IL - Load Current - A
VDO - Dropout Voltage - mV
TJ = 275C
APPLICATION INFORMATION
The UC382 is easy to use. The adjustable version requires two 0.1% resistors to set the output voltage. The
fixed versions of the UC382 require no external resistors. All versions of the UC382 require decoupling
capacitors on the input and output. In a typical application, VB and VIN are driven from switching power supplies
which may have large filter capacitors at their outputs. If the UC382 is further than 12 inches from the power
supply, it is recommended to add local decoupling as close as possible to the linear regulator.
Decouple the output of the UC382 with at least 100 µF of high-quality tantalum or Sanyo OSCON capacitors
close to the VOUT pin for maximum stability. Many applications involving Ultra-Fast GTL or BTL applications
require additional capacitance close to the load. The exact amount will vary according to speed and magnitude
of the load transients and the tolerance allowed for transients on VOUT. When specifying the decoupling
capacitors, the series resistance of the capacitor bank is an important factor in its ability to filter load transients.
The UC382 allows for Kelvin sensing the voltage at the load. This improves regulation performance and
eliminates the voltage drops due to wire-trace resistance. This voltage drop must be added to the headroom
(VIN to VOUT and VB to VOUT). The dropout of 450 mV is measured at the pins and does not include additional
drops due to trace resistance. The minimum load current is 10 mA.
Two or more UC382’s may be used in parallel. While stable, this arrangement does degrade the transient
response.
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
6POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Figure 3
OPEN LOOP GAIN
vs
FREQUENCY
10 M1 M100 k10 k1 k100
−10
0
10
20
30
40
50
60
70
f − Frequency − Hz
Gain - dB
Figure 4
OPEN LOOP PHASE
vs
FREQUENCY
10 M1 M100 k10 k1 k100
−180
−90
0
f − Frequency − Hz
Phase - deg
Figure 5
POWER SUPPLY REJECTION RATIO (VB INPUT)
vs
FREQUENCY
10 M1 M100 k10 k1 k100
0
10
20
30
40
50
60
f − Frequency − Hz
PSRR - Power Supply Rejection Ratio (VB INPUT) − dB
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
7
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
APPLICATION INFORMATION
UDG-00081
4
5
1
2
3
ADJ
VOUT
VB
VIN
GND
4.7 µF
TANT
3.3 V
1µF
CER
5 V
100 µF
TANT 121
R1
UC382−ADJ PULSE
GENERATOR
VO = 1.2 V IRF
520
++
Figure 6. Transient Test Circuit
Figure 7
10 mA to 3 A/ms Load Transient Response
µ
       
   
SLUS317B − JANUARY 2000 − REVISED FEBRUARY 2004
8POST OFFICE BOX 655303 DALLAS, TEXAS 75265
APPLICATION INFORMATION
UDG-00082
4
5
1
2
3
ADJ
VOUT
VB
VIN
GND
4.7µF
TANT
+3.3 V
4.7µF
CER
+5 V
330µF
OSCON
UC382−ADJ
KELVIN
SENSE
POINT
2.2µF
CER
R3
60
R4
120
+1.8 V
OUTPUT
+
++
Figure 8. Typical UC382-ADJ Application
UDG-00083
4
5
1
2
3
ADJ
VOUT
VB
VIN
GND
4.7µF
+5 V
330µF
OSCON
UC382−1
KELVIN
SENSE
POINT
2.2µF
CER
+1.5 V
OUTPUT
+
+
Figure 9. Typical UC382-1, -2, or -3 Application
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC282T-1 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-1G3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-2 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-2G3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-3G3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-ADJ ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282T-ADJG3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC282TD-1 OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC282TD-2 OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC282TD-3 OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC282TD-ADJ OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC282TDKTTT-1 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDKTTT-1G3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDKTTT-2 ACTIVE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC282TDKTTT-2G3 ACTIVE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC282TDKTTT-3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC282TDKTTT-3G3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDKTTT-ADJ ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDKTTT-ADJG3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDTR-1 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDTR-1G3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDTR-3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDTR-3G3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDTR-ADJ ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC282TDTR-ADJG3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382T-1 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-1G3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-2 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-2G3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-3G3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-ADJ ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382T-ADJG3 ACTIVE TO-220 KC 5 50 Green (RoHS
& no Sb/Br) CU SN N / A for Pkg Type
UC382TD-1 OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
UC382TD-2 OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC382TD-3 OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC382TD-ADJ OBSOLETE DDPAK/
TO-263 KTT 5 TBD Call TI Call TI
UC382TDKTTT-1 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-1G3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-2 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-2G3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-3G3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-ADJ ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDKTTT-ADJG3 ACTIVE DDPAK/
TO-263 KTT 5 50 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDTR-1 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDTR-1G3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDTR-3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDTR-3G3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDTR-ADJ ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
UC382TDTR-ADJG3 ACTIVE DDPAK/
TO-263 KTT 5 500 Green (RoHS
& no Sb/Br) CU SN Level-2-260C-1 YEAR
(1) The marketing status values are defined as follows:
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 4
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
UC282TDKTTT-1 DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC282TDKTTT-3 DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC282TDKTTT-ADJ DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC282TDTR-1 DDPAK/
TO-263 KTT 5 500 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC282TDTR-3 DDPAK/
TO-263 KTT 5 500 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC282TDTR-ADJ DDPAK/
TO-263 KTT 5 500 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC382TDKTTT-1 DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC382TDKTTT-2 DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC382TDKTTT-3 DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC382TDKTTT-ADJ DDPAK/
TO-263 KTT 5 50 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC382TDTR-1 DDPAK/ KTT 5 500 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 1
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TO-263
UC382TDTR-3 DDPAK/
TO-263 KTT 5 500 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
UC382TDTR-ADJ DDPAK/
TO-263 KTT 5 500 330.0 24.4 10.6 15.6 4.9 16.0 24.0 Q2
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
UC282TDKTTT-1 DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC282TDKTTT-3 DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC282TDKTTT-ADJ DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC282TDTR-1 DDPAK/TO-263 KTT 5 500 367.0 367.0 45.0
UC282TDTR-3 DDPAK/TO-263 KTT 5 500 367.0 367.0 45.0
UC282TDTR-ADJ DDPAK/TO-263 KTT 5 500 367.0 367.0 45.0
UC382TDKTTT-1 DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC382TDKTTT-2 DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC382TDKTTT-3 DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC382TDKTTT-ADJ DDPAK/TO-263 KTT 5 50 367.0 367.0 45.0
UC382TDTR-1 DDPAK/TO-263 KTT 5 500 367.0 367.0 45.0
UC382TDTR-3 DDPAK/TO-263 KTT 5 500 367.0 367.0 45.0
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 2
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
UC382TDTR-ADJ DDPAK/TO-263 KTT 5 500 367.0 367.0 45.0
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated