SPEC NO: DSAE2822 REV NO: V.7B DATE: APR/13/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005221
T-1 3/4 (5mm) INFRARED EMITTING DIODE
Part Number: L-7113SF6BT
Features
zMechanically and spectrally matched to the phototransistor.
zRoHS compliant.
Description
SF6 Made with Gallium Aluminum Arsenide Infrared Emit-
ting diodes.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAE2822 REV NO: V.7B DATE: APR/13/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005221
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Radiant Intensity/ luminous flux: +/-15%.
3. Radiant intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. Forward Voltage: +/-0.1V.
2. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/100 Duty Cycle, 10μs Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
Po (mW/sr) [2]
@ 20mA
Viewing
Angle [1]
Min. Typ. Min. Typ. 2θ1/2
L-7113SF6BT SF6 (GaAlAs) Blue Transparent 18 40 55 100 20°
Po (mW/sr) [2]
@ 50mA
Parameter P/N Symbol Typ. Max. Units Test Conditions
Forward Voltage [1] SF6 VF 1.35 1.6 V IF=20mA
Reverse Current SF6 IR 10 uA VR = 5V
Capacitance SF6 C 30 pF VF=0V;f=1MHz
Peak Spectral Wavelength SF6 λP 860 nm IF=20mA
Spectral Bandwidth SF6 Δλ1/2 50 nm IF=20mA
Parameter Symbol SF6 Units
Power dissipation PD 80 mW
DC Forward Current IF 50 mA
Peak Forward Current [1] iFS 1 A
Reverse Voltage VR 5 V
Operating Temperature TA -40 To +85 °C
Storage Temperature TSTG -40 To +85 °C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAE2822 REV NO: V.7B DATE: APR/13/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005221
L-7113SF6BT
SPEC NO: DSAE2822 REV NO: V.7B DATE: APR/13/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005221
PACKING & LABEL SPECIFICATIONS L-7113SF6BT
SPEC NO: DSAE2822 REV NO: V.7B DATE: APR/13/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005221
SPEC NO: DSAE2822 REV NO: V.7B DATE: APR/13/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101005221
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes