A
The world’s first Flexible PIFA antenna for Wi-Fi MIMO applications (patent pending). The FlexPIFA
MIMO is specifically designed for 802.11 a/b/g/n as well as 802.11ac Wi-Fi modules that use MIMO or
Wi-Fi Diversity.  The flexible PIFA design provides for consistent performance across a broad array of
enclosures and enables adhering the antenna to flat and curved surfaces.   The FlexPIFA MIMO
drastically simplifies the size, cost and technical requirements for implementing the two antennas
required for 802.11 MIMO radio applications as the proper orientation and spacing between the two
integrated antenna elements is already optimized for MIMO radio performance, giving you the best
possible range and throughput.
▪ Two Integrated 2.4/5 GHz dual band elements
specifically designed for 802.11 MIMO applications.
▪ Laird’s Patented Flexible PIFA Antenna structure
allows for the use of the antenna on flat and curved
surfaces
▪ Compact design versus the complexity of two
separate antennas.
▪ Low ECC Performance for best in
class throughput and range
performance.
▪ Simple Installation with optimized
antenna orientation and spacing
Operating Frequency (MHz)
2400 - 2480
4900 - 5900
Peak Gain, dBi (Typ)
1.7
2.5
Peak Gain, dBi (Max)
2.0
3.5
VSWR Port 1 (Typ)
<2.3:1
<2.8:1
VSWR Port 2 (Typ)
<2.3:1
<2.8:1
VSWR (Max)
<2.5:1
<3.0:1
Isolation, dB (Typ)
>19
>19
Max Gain ±30 above Horizon (dBi)
N/A
2.2
Nominal Impedance
Max Power @ 25°C
Polarization
Azimuth Beam Width
Dimensions (mm)
Weight
Operating Temperature (°C)
Storage Temperature (°C)
Material Substance Compliance
EFD2455A3S-10MHF1
100mm
MHF4
ANT-DS-FLEXMIMO 0618
ANT-DS-FLEXMIMO 0618
ANT-DS-FLEXMIMO 0618
Americas: +1.847 839.6925
IAS-AmericasSales@lairdtech.com
Europe: +44.1628.858941
IAS-EUSales@lairdtech.com
Asia: IAS-AsiaSales@lairdtech.com
Middle East and Africa: +44.1628.858941
IAS-MEAUSales@lairdtech.com
www.lairdtech.com
Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations
Laird will, at its option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited warranty is in force
for the useful lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5)
years from the original date of the end product purchase.
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of
Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness,
merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products
are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2018 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Inc. or an affiliate company thereof.
Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.