97 series solder type how to order Example of part number for solder type connectors is given below. 97 - 3101 A - 28 - 21 S Y (847) (639) Shell Finish Suffix Omit for standard O.D. cadmium finish (604) Gray anodized (608) Black anodized (621) Black zinc alloy (624) Green zinc alloy (639) Clear cadmium (640) Conductive black zinc alloy (689) Electroless nickel Series Number 97 - Like MS but Amphenol(R) Shell Type 3100 Wall Receptacle 3101 Cable Receptacle 3102 Box Receptacle 3106 Straight Plug 3107 Quick Disconnect Plug 3108 Angle Plug OR mpheno E Shell Construction A - Solid Backshell B - Split Backshell Shell Size 8S, 10SL, 12S, 14S, 14, 16S, 16 18, 20, 22, 24, 28, 32, 36 C l A RoHS Compliant HS Ro Suffix (946) Black zinc alloy U E /2 002 / 95 / plating plus solder contact less pre-filled cup Deviation from standard A&B construction Omit this suffix if standard construction is desired (115) Small flange receptacle (426) Gold over silver plating on contacts (438) Construction for potting (see page 30 for additional deviations) (936) Connector plug with safety wire holes in coupling nut Consult Amphenol, Sidney, NY for other deviations. Insert Configuration Number See insert availability listing - pages 4 & 5, and see insert arrangement illustrations pages 6-11. Alternate Insert Positions Omit for standard position W, X, Y or Z for alternate positions, depending on insert (see page 12 for positions available) Note: Accessories for 97 Series Connectors should be ordered with matching connector plating. See accessory pages 33-39. Contact Type P = Pin S = Socket 19 IMAGED / Nov . 04 2004, 09:26 AM IMAGED / Nov . 04 2004, 09:26 AM