MBR2560CT, MBRF2560CT, MBRB2560CT
www.vishay.com Vishay General Semiconductor
Revision: 27-Nov-17 1Document Number: 87593
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Dual Common Cathode Schottky Rectifier
FEATURES
Power pack
Guardring for overvoltage protection
Lower power losses, high efficiency
Low forward voltage drop
High forward surge capability
High frequency operation
Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for D2PAK (TO-263AB) package)
Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, or polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, D2PAK (TO-263AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
PRIMARY CHARACTERISTICS
IF(AV) 2 x 12.5 A
VRRM 60 V
IFSM 150 A
VF0.65 V at 15 A
TJ max. 150 °C
Package TO-220AB, ITO-220AB, D2PAK
(TO-263AB)
Diode variation Common cathode
CASE
PIN 2
PIN 1
PIN 3
TO-220AB
MBR2560CT
ITO-220AB
MBRF2560CT
MBRB2560CT
PIN 1
PIN 2
K
HEATSINK
1
23
1
2
K
D2PAK (TO-263AB)
PIN 2
PIN 1
PIN 3
123
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBR2560CT UNIT
Maximum repetitive peak reverse voltage VRRM 60
VWorking peak reverse voltage VRWM 60
Maximum DC blocking voltage VDC 60
Maximum average forward rectified current
at TC = 130 °C
total device IF(AV)
25 A
per diode 12.5
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load per diode IFSM 150
A
Peak repetitive reverse surge current per diode
at tp = 2 μs, 1 kHz IRRM 0.5
Peak non-repetitive reverse energy (8/20 μs waveform)
per diode ERSM 25 mJ
Electrostatic discharge capacitor voltage human body model: C = 100 pF,
R = 1.5 kVC25 kV
Voltage rate of change (rated VR) dV/dt 10 000 V/μs
Operating junction temperature range TJ-65 to +150 °C
Storage temperature range TSTG -65 to +175
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V
MBR2560CT, MBRF2560CT, MBRB2560CT
www.vishay.com Vishay General Semiconductor
Revision: 27-Nov-17 2Document Number: 87593
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL MBR2560CT UNIT
Maximum instantaneous forward voltage
per diode IF = 15 A
TC = 25 °C
VF (1)
0.75
V
TC = 125 °C 0.65
Maximum instantaneous reverse current at
blocking voltage per diode
TC = 25 °C
IR (1)
1.0
mA
TC = 125 °C 50
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER SYMBOL MBR MBRF MBRB UNIT
Typical thermal resistance from junction to case per diode RJC 1.5 4.5 1.5 °C/W
ORDERING INFORMATION (Example)
PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE
TO-220AB MBR2560CT-E3/45 1.85 45 50/tube Tube
ITO-220AB MBRF2560CT-E3/45 1.99 45 50/tube Tube
TO-263AB MBRB2560CT-E3/45 1.35 45 50/tube Tube
TO-263AB MBRB2560CT-E3/81 1.35 81 800/reel Tape and reel
MBR2560CT, MBRF2560CT, MBRB2560CT
www.vishay.com Vishay General Semiconductor
Revision: 27-Nov-17 3Document Number: 87593
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge
Current Per Diode
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
0
6
18
12
30
050 100 150
24
Resistive or Inductive Load
Average Forward Current (A)
Case Temperature (°C)
0
25
75
50
125
100
150
1 100
10
T
J
= T
J
Max.
8.3 ms Single Half Sine-Wave
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
100
10
1.0
0.1
0.01
02.00.15.01.0 0.40.3 0.6 0.7 0.8 0.9
TJ = 150 °C
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
)A(
t
nerruC dr
a
wr
o
F
su
o
e
n
atn
a
t
snI
Instantaneous Forward Voltage (V)
1
10
100
0.01
0.001
0.1
002010 406080
TJ = 125 °C
TJ = 25 °C
TJ = 75 °C
)Am( tnerru
C esreve
R suoenatnatsnI
Percent of Rated Peak Reverse Voltage (%)
101 100
1000
10 000
100
0.1
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mV
p-p
Reverse Voltage (V)
)Fp( ecnatic
apaC noitcnuJ
0.01 101 100
10
100
0.1
0.1
1
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
MBR2560CT, MBRF2560CT, MBRB2560CT
www.vishay.com Vishay General Semiconductor
Revision: 27-Nov-17 4Document Number: 87593
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
0.113 (2.87)
0.103 (2.62)
0.370 (9.40)
0.360 (9.14)
0.415 (10.54) max.
0.635 (16.13)
0.625 (15.87)
PIN
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.105 (2.67)
0.095 (2.41)
0.104 (2.65)
0.096 (2.45) 0.205 (5.20)
0.195 (4.95)
0.035 (0.90)
0.028 (0.70)
0.154 (3.91)
0.148 (3.74)
132
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.145 (3.68)
0.135 (3.43)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.603 (15.32)
0.573 (14.55)
ITO-220AB
0.076 (1.93) REF.
45° REF.
PIN
321
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
0.600 (15.24)
0.580 (14.73)
0.560 (14.22)
0.530 (13.46)
0.057 (1.45)
0.045 (1.14)
0.191 (4.85)
0.171 (4.35)
0.671 (17.04)
0.651 (16.54)
0.035 (0.89)
0.025 (0.64)
0.205 (5.21)
0.195 (4.95)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.057 (1.45)
0.045 (1.14)
0.028 (0.71)
0.020 (0.51)
0.110 (2.79)
0.100 (2.54)
7° REF.
0.135 (3.43) DIA.
0.122 (3.08) DIA.
0.110 (2.79)
0.100 (2.54)
0.190 (4.83)
0.170 (4.32)
7° REF.
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.350 (8.89)
0.330 (8.38)
D2PAK (TO-263AB) Mounting Pad Layout
0.670 (17.02)
0.591 (15.00)
0.105 (2.67)
0.095 (2.41)
0.08 (2.032) MIN.
0.15 (3.81) min.
0.33 (8.38) min.
0.42 (10.66) min.
12
K
K
0.140 (3.56)
0.110 (2.79)
0.021 (0.53)
0.014 (0.36)
0.110 (2.79)
0.090 (2.29)
0 to 0.01 (0 to 0.254)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
0.190 (4.83)
0.160 (4.06)
0.205 (5.20)
0.195 (4.95)
0.624 (15.85)
0.591 (15.00)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.360 (9.14)
0.320 (8.13)
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED