LED Lamp GL54 series o5mm(T-1 3/4), Cylinder Type, Colored Diffusion LED Lamps for Wide Viewing Angle Indicator GL54 series Outline Dimensions Radiation Diagram (Ta=25C) o5.00.15 Protruded resin 1.5MAX -20 Relative luminous intensity(%) 0.5 (1.0) (Tie-bar cut) +10 +20 +30 100 -050 -060 0.50.1 0 -010 12.4 7.85 8.6 -030 -040 23.0MIN Colored diffusion (Unit : mm) -070 +40 80 +50 60 +60 40 +70 20 -080 +80 -090 +90 (1.0) 0 1 2 o5.75 0.50.1 2.54NOM 2.5 Pin connections 1 Anode 2 Cathode Unspecified tolerance:0.2 Absolute Maximum Ratings (Ta=25C) Model No. Radiation color Radiation material Power dissipation Forward current Peak forward current P IF IFM*1 (mW) (mA) (mA) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/C) VR Topr Tstg Tsol*2 (V) (C) (C) (C) DC Pulse 50 0.13 10 23 GaP GL5PR4 Red 50 0.40 30 84 GaAsP on GaP GL5HD4 Red 50 0.40 30 84 GaAsP on GaP GL5HY4 Yellow 50 0.40 30 84 GL5EG4 Yellow-green GaP 50 0.40 30 84 GaP Green GL5KG4 *1 Duty ratio=1/10, Pulse width=0.1ms *2 5s or less(At the position of 1.6mm or more from the bottom face of resin package) 5 5 5 5 5 0.67 0.67 0.67 0.67 0.67 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 Electro-optical Characteristics Lens type Model No. GL5PR4 GL5HD4 Colored GL5HY4 diffusion GL5EG4 GL5KG4 (Notice) Forward voltage VF(V) TYP 1.9 2.0 2.0 2.1 2.1 MAX 2.3 2.8 2.8 2.8 2.8 260 260 260 260 260 (Ta=25C) Peak emission wavelength IF p(nm) (mA) TYP 695 635 585 565 555 5 20 20 20 20 Luminous intensity IF IV(mcd) (mA) TYP 3.0 25 20 20 6.5 5 20 20 20 20 Spectrum radiation bandwidth IF (nm) (mA) TYP 100 35 30 30 25 5 20 20 20 20 Reverse current VR IR(A) (V) MAX 10 10 10 10 10 4 4 4 4 4 Page for characteristics (MHZ) diagrams Terminal capacitance Ct(pF) TYP 55 20 35 35 40 1 1 1 1 1 In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 46 (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams PR series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 (Ta=25C) 1000 500 50 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 Ambient temperature Ta(C) 1.6 1.8 2.0 2.2 2.4 -20 2.6 0 Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current (Ta=25C) 1000 60 20 Ambient temperature Ta(C) Forward voltage VF(V) (Ta=25C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 0 -25 0 25 50 75 85 100 1.0 0.1 125 2.0 1.0 0.2 0.5 1 2 5 10 20 1/50 50 1/20 1/10 Forward current IF(mA) Ambient temperature Ta(C) 1/5 1/2 1 Duty ratio DR HD series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 60 (Ta=25C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(C) Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current (Ta=25C) (Ta=25C) 1000 60 20 Ambient temperature Ta(C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 118 (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) LED Lamp Characteristics Diagrams HS series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) 60 Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 50 500 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 40 20 10 5 3 2 10 0 25 50 75 85 100 0.5 1.0 125 200 100 50 20 1 0 -25 (IF=20mA) 1000 10 1.2 1.4 Ambient temperature Ta(C) 1.6 1.8 2.0 2.2 2.4 -20 0 Forward voltage VF(V) 60 500 50 200 40 60 80 100 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 20 Ambient temperature Ta(C) (Ta=25C) (Ta=25C) 500 40 30 20 100 Peak forward current IF(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 300 50 20 10 5 10 0 25 50 75 85 100 1 0.1 125 50 30 10 2 0 -25 100 5 0.2 0.5 1 2 5 10 20 1/50 50 1/20 1/10 1/5 1/2 1 Duty ratio DR Forward current IF(mA) Ambient temperature Ta(C) Note)Characteristics shown in diagrams are typical values. (not assurance value) HY series Forward Current Derating Curve Forward Current vs. Forward Voltage(Note) Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 60 (Ta=25C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 Ambient temperature Ta(C) 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) 60 80 100 120 (Ta=25C) (Ta=25C) 1000 60 40 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) Peak Forward Current Derating Curve 20 Ambient temperature Ta(C) 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 119 LED Lamp Characteristics Diagrams EG series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 60 (Ta=25C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(C) Peak Forward Current Derating Curve 40 60 80 100 120 Duty Ratio vs. Peak Forward Current Luminous Intensity vs. Forward Current(Note) 60 20 Ambient temperature Ta(C) (Ta=25C) (Ta=25C) 1000 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 100 1.0 0.1 125 1.0 0.2 0.5 Ambient temperature Ta(C) 1 2 5 10 20 1/50 50 1/20 1/10 1/5 1/2 1 Duty ratio DR Forward current IF(mA) KG series Forward Current vs. Forward Voltage(Note) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature(Note) (Ta=25C) 100 60 (Ta=25C) 1000 50 500 40 30 20 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 50 10 5.0 1.0 0.5 100 50 10 5.0 10 0 -25 0 25 50 75 85 100 0.1 1.0 125 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 Forward voltage VF(V) Ambient temperature Ta(C) Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current(Note) 60 20 40 60 80 100 120 Ambient temperature Ta(C) Duty Ratio vs. Peak Forward Current (Ta=25C) (Ta=25C) 1000 500 500 200 200 40 30 20 Peak forward current IFM(mA) Relative luminous intensity(%) Peak forward current IFM(mA) 50 100 50 20 10 5.0 100 50 20 10 5.0 10 2.0 2.0 0 -25 0 25 50 75 85 Ambient temperature Ta(C) 100 125 1.0 0.1 1.0 0.2 0.5 1 2 5 10 20 Forward current IF(mA) 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 120 (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/)