Bulletin 125152/B International 1r|Rectifier 111RKI SERIES PHASE CONTROL THYRISTORS Stud Version Features 110A @ High current and high surge ratings @ dv/dt = 1000V/ps option @ Ceramic housing @ Threaded studs UNF 1/2 - 20UNF2A @ Types up to 1200V Vow Vorw @ di/dt = 300A/ps Typical Applications @ DC motor controls @ Controlled DC power supplies @ AC controllers Major Ratings and Characteristics Parameters 111RKI Units lreawy 110 A @T, 90 C Iraetes) 172 A lias @50Hz 2080 A @ 60Hz 2180 A t @50Hz 21.7 KA2s @ 60Hz 19.8 KA?s Fi Voawann 400 to 1200 v : t, typical 110 ys case style TO-209AC (TO-94) T, - 40 to 140 C D-209111RKI Series ELECTRICAL SPECIFICATIONS Voltage Ratings _ Voltage Vorm Var: Max. repetitive Vasu: Maximum non- low! laa Max. Type number | Code peak and off-state voltage repetitive peak voltage @ T,=T, max. Vv Vv mA 40 400 500 111RKI 80 800 900 20 120 1200 1300 On-state Conduction Parameter 111RKI Units | Conditions lriavy Max. average on-state current 110 A 180 conduction, half sine wave @ Case temperature 90 C rams Max. RMS on-state current 172 DC @ 83C case temperature lrsm Max. peak, one-cycle 2080 t= 10ms | No voltage non-repetitive surge current 2180 A t=8.3ms]| reapplied 1750 t= 10ms | 100% Vary 1830 t=8.3ms| reapplied Sinusoidal half wave, 2 Maximum #t for fusing 21.7 t= 10ms | No voltage Initial T, = T, max. 19.8 t= 8.3ms| reapplied KAs Pp 15.3 t=10ms | 100% V,.., 14.0 t=8.3ms| reapplied Vt Maximum [vt for fusing 217 KAys]_ t= 0.1 to 10ms, no voltage reapplied Vito) Low level value of threshold voltage 0.82 (16.7% x mx bay <l<nx Law) T,=T, max. v v High jevel value of threshold T(TO)2 voltage 1.02 (I> X bray) Ty = Ty max. Ly Low level value of on-state 216 (16.7% | ; | ),T = T, max . 7% XX <i<nx ,7,= 7, max. slope resistance TM Taw oy maQ High level val f on-st le igh lev value of on-state 1.70 (> 1X Igy hTy = T, max slope resistance t Von Max. on-state voltage 1.57 Vv loa 350A, T, = T, max., & = 10ms sine pulse hy Maximum holding current 150 mA | T, = 25C, anode supply 6V resistive load I, Typical latching current 400 Switching Parameter 111RKI Units | Conditions di/dt Max. non-repetitive rate of rise Gate drive 20V, 200, t < 1ps { turned t 300 AWS | > ot ode voltage < 80 Vp of turned-on curren T= T, max, anode voltage < 80% Vy ' Typical delay ti 1 Gate current 1A, di fat = 1A/ys 7 ypical delay time Vg = 0.67% Voay Ty = 26C + _Typical turn-off time 10 HS Ty 250A, T, = T, max, didt = -6Alps, V, = 50V ical tu im q ye dvidt = 20V/us, Gate OV 250 D-210111RKI Series Blocking Parameter 117RKI Units | Conditions dv/dt Maximum critical rate of rise of . =T . off-state voltage 500 Vius | T, = T, max. linear to 80% rated Vo, I Max. peak reverse and off-state i Ine leakage current 20 mA | T,= Ty max, rated Vony/Vany applied Triggering Parameter 111RKI Units | Conditions Pa, Maximum peak gate power 12 T,=T, max, t, s Sms Ww p Poa Maximum average gate power 3.0 T, = T, max, f = 50Hz, d% = 50 lon Max. peak positive gate current 3.0 A |T,=T, max, b s 5ms +Vg, Maximum peak positive 2 gate voltage 0 Vey Maximum peak negative Vv |T,= 7, max, t, s 5ms gate voltage 10 TYP. MAX. ler DC gate current required 180 - T, =~ 40C to trigger 80 100 mA |T,= 25C 40 . Max. required gate trigger/ cur- T, = 140C rent voltage are the lowest value Vv DC gate voltage required . T =-40C which will trigger all units 12V or oa ge req 25 4 anode-to-cathode applied to trigger 1.6 2 Vo|T,= 26C 1 - T, = 140C leo DC gate current not to trigger 6.0 mA Max. gate current/ voltage not to T<T trigger is the max. value which . a= Ty max will not trigger any unit with rated Veo DC gate voltage not to trigger 0.25 v Vary anodiert hode applied Thermal and Mechanical Specification Parameter 111RKI Units | Conditions T, Max. operating temperature range} -40 to 140 C Taig Max. storage temperature range -40 to 150 Rinjc Max. thermal resistance, 0.27 DC operation junction to case = KiW RAincg Max. thermal resistance, . 0.1 Mounting surface, smooth, flat and greased case to heatsink T Mounting torque, + 10% 15.5 Non lubricated threads (137) Nm 14 (Ilbf-in)| Lubricated threads (120) wt Approximate weight 130 g Case style TO-209AC (TO-94) See Outline Table D-211 a 1 = 7 | cx) a Fife)111RKI Series AR,, ,. Conduction (The tohowing table shows the increment of thermal resistence R, ,. when devices operate at different conduction angles than DC) Conduction angle | Sinusoidal conduction | Rectangular conduction | Units | Conditions 180 0.043 0.031 T, = T, max. 120 0.052 0.053 go 0.066 0.071 K/W 60 0.096 0.101 30 0.167 0.169 Ordering Information Table Device Code Law) rated average output current (rounded/10) 0 = Eyelet terminals (Gate and Auxiliary Cathode Leads) 1 = Fast - on terminals (Gate and Auxiliary Cathode Leads) 2 = Flag terminals (For Cathode and Gate Terminals) Thyristor Voltage code: Code x 10 = V,,,,, (See Voltage Rating Table) Critical dv/dt: None = 500V/ysec $90 = 1000V/psec Outline Table CERAMIC HOUSING FLAG TERMINAL 22.5 DIA. ! (0.89) MAX | .2 (0.20) DIA. . uo | e- dh rie 10 ina & 2 53 (0.30) 3 r 24 Jy 2 gh Sx 213 yp e /2"-20UNF-2A Case Style TO-208AD (TO-83) All dimensions in millimeters (inches) ~~ 2.4 (0.09) 29.5 (1.16) D-212111RKI Series Outline Table CERAMIC HOUSING 16.5 (0.65) MAX. 8.5 (0.33) DIA, oh | [sero YY - FLEXIBLE LEAD C.8. 16mm 2 2 (025 s.i) RED SILICON RUBBER C.S.0.4mm (.0006 si.) a/8 RED CATHODE ele . / WHITE GATE oir | Fast-on Terminals 215 (8.46) + 10 (0.39) AMP. 280000-1 z REF-250 = RED SHRINK os WHITE SHRINK 5 S| 7 | re 3| = x | 22.5 (0.88) MAX. DIA. a g| 3 a 2 a xt 84 2 4 | 3 | | ~ {|= . * SW 27 1/2"-20UNF-2A 29.5 (1.16) MAX. | bem! Case Style TO-209AC (TO-94) All dimensions in millimeters (inches) > (140 T 7) 140 T T T T T ? 111RKI Series Y 111RKI Series 8 59 Rthyc (DC) = 0.27 K/W 130 Renyc (OC) = 0.27 KAW _| 3 N 5 8 120 Sx {\ B 120 NN {tte o \ Were Angle 5 no \ N conduction Petod ro \ S AA 2 100 2 8 TY WAY S S 100 N N\ 3 NN 9 | q 90 90 \ < 60 oo Ee 0 120 t E ae | 180 2 igor | Dc 5 80 il I 70 | i 1 2 0 20 40 60 80 100. 120 0 20 40 60 80 100 120 140 160 180 Average On-state Current (A) Average On-state Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics D-213111RKI Series Sle L7Z | WP + Ld ros vi Ye SS o 80 Aff 4175 SON x 60 / li ZL \ SOSA \ 8 8 ly | aS SX \ 111RKI Series y= Moc fos | Maximum Average On-state Power Loss 8 Q 20 40 & 8 100 120 20 40 60 80 100 120 140 Average On-state Current (A) Maximum Allowable Ambient Temperature CC) Fig. 3 - On-state Power Loss Characteristics 1. 15 WY f 2 by 11 1RKI Series Ty = 140C Maximum Average Orrstate Power Loss (W) 0 2 40 6 8 100120 140160180 20 40 60 80 100 120 140 Average On-state Curent (A) Maximum Allowable Ambient Temperature (C) Fig. 4 - On-state Power Loss Characteristics < | At Any Rated Load Condition And With z 2500 Maximum Non Repetitive Surge Current Rated VarM Applied Following a Suge. 5 Versus Pulse Train Duration. Control & 1800 tt Initial Ty= 140C 5 Ot Conduction May Not Be Maintained. a NN i | ite @ 60 Hz 0.0083 s 8 2000 KL Initial Ty= 140C 2 1600 \ . |e @ 50 Hz 0.01005 g | r L~ |No Voltage Reappied Qe : pete Vee ecpoted , NH | ; | 5 ml wool NT LL g ONT g rene Xl i Wi g NSU 3 NE ! @ 1200 S i oN | . a } aS B 1000 |i : 3 1000} 3 5 J SR x wnt Sores : = 3 P11 Rt Sones TT 2 e0 Et i | soo tt Pd J 10 100 0.01 0.1 ] 10 Number Of Equal Amplitude Half Cycle Current Pulses (N) Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current D-214Transient Thermat impedance Z #, yK/W) instantaneous Gate Voltage (V) 111RKIi Series g : 3 instantaneous Or-state Current (A) 8 11 IRKI Series 0 } 2 3 4 5 Instantaneous On-state Voltage (V) Fig. 7 - On-state Voltage Drop Characteristics State truc= 0.27 K/W 0.1 0.0) 111K 0.001 0.0001 0.001 0.01 0.1 } 10 Square Wave Pulse Duration (s) Fig. 8 - Trarmal impedance Z,, ,, Characteristic 100 gate 1) PGM = 12W, tp = 5ms Recommended toad line PGM = 30W. tp = 2ms fated di/dt: 20V, 3doehms: PGM = 6OW, tp = Ims tr<=0.5 ps, to=>ds PGM = 200W, tp = b) Recommended load line 10 <=30% rated di/dt: 15V, tr<=1 ps, tp= 0.1 Device: 11 JRKI Series Limited by V) 0.001 0.01 0.1 1 10 100 1000 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics D-215