Switching Diode Datasheet IMN10 Application Dimensions (Unit : mm) Ultra high speed switching Land size figure (Unit : mm) 19 2.90.2 0.30.1 Each lead has same dimension 0.05 (5) 0.95 0.95 (6) 2 .4 (4) 0.150.1 0.06 1.0M IN . 0.2 0.1 1.6 1) Small mold type. (SMD6) 0.6 0.45 0.35 0.35 0.45 2.80.2 Features 00.1 (3) (2) (1) 0.80.1 1.90.2 0.95 ROHM : SMD6 JEDEC : S0T-457 JEITA : SC-74 Anode Structure 1.10.2 0.1 0.95 0.8MIN. SMD6 0.30.6 2) High reliability. week code 1Pin Mark Cathode Construction Taping specifications (Unit : mm) 4.00.1 1.550.1 0 2.00.05 0.30.1 1.05MIN 4.00.1 3.20.1 3.20.1 8.00.2 5.50.2 00.5 3.20.1 3.50.05 1.750.1 Silicon epitaxial planar 1.350.1 Absolute maximum ratings (Ta= 25C) Parameter Symbol Limits Unit Reverse voltage (repetitive peak) VRM 80 V Reverse voltage (DC) VR 80 V Forward current (Single) IFM 300 mA Forward current (Double) IFM 450 mA Average rectified forward current (single) Io 100 mA Isurge 4 A Power dissipation (TOTAL)(*1) Pd 300 mW Junction temperature Tj 150 C Storage temperature Tstg 55 to 150 C Surge current (t=1s) (*1) Not exceed 200mW per element. Electrical characteristics (Ta = 25C) Parameter Symbol Min. Typ. Max. Unit Conditions Forward voltage VF - - 1.2 V Reverse current IR - - 0.1 A VR=70V Capacitance between terminals Ct - - 3.5 pF VR=6V, f=1MHz Reverse recovery time trr - - 4 www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 1/3 ns IF=100mA VR=6V, IF=5mA,RL=50 2013.02 - Rev.D Data Sheet IMN10 100 10000 1000 REVERSE CURRENT : IR(nA) FORWARD CURRENT : IF(mA) Ta = 75C Ta = 125C 10 Ta = 150C 1 Ta = 25C Ta = 125C Ta = 150C 100 Ta = 75C 10 Ta = 25C 1 Ta = 25C 0.1 Ta = 25C 0.01 0.1 0 0 100 200 300 400 500 600 700 800 900 1000 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS 10 20 30 40 50 FORWARD VOLTAGE : VF(mV) CAPACITANCE BETWEEN TERMINALS : Ct(pF) 80 Ta=25C IF=100mA n=30pcs f = 1MHz 1 940 AVE : 921.7mV 930 920 910 900 0.1 0 5 10 15 20 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS VF DISPERSION MAP 1.5 100 Ta=25C VR=80V n=10pcs 80 70 60 50 40 AVE : 9.655nA Ta=25C f=1MHz VR=6V n=10pcs 1.4 1.3 CAPACITANCE BETWEEN TERMINALS : Ct(pF) 90 REVERSE CURRENT : IR(nA) 70 950 10 30 60 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 1.2 AVE : 1.040pF 1.1 1 0.9 0.8 20 0.7 10 0.6 0 0.5 Ct DISPERSION MAP IR DISPERSION MAP www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 2/3 2013.01 - Rev.D Data Sheet IMN10 10 20 Ta=25C VR=6V IF=5mA RL=50 n=10pcs PEAK SURGE FORWARD CURRENT : IFSM(A) RESERVE RECOVERY TIME : trr(ns) 9 IFSM 8.3ms 15 1cyc. 10 AVE : 3.50A 5 8 7 6 5 4 AVE : 1.93ns 3 2 1 0 0 IFSM DISPERSION MAP trr DISPERSION MAP 5 100 IFSM IFSM 8.3ms 8.3ms time PEAK SURGE FORWARD CURRENT : IFSM(A) PEAK SURGE FORWARD CURRENT : IFSM(A) 4 1cyc. 3 2 1 0 10 1 1 10 100 0.1 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 1 10 100 TIME : t(ms) IFSM-t CHARACTERISTICS 1000 10 9 8 100 Rth(j-c) Mounted on epoxy board 10 IM=10mA IF=100mA ELECTROSTATIC DISCHARGE TEST ESD(KV) TRANSIENT THAERMAL IMPEDANCE : Rth (C/W) Rth(j-a) 7 6 5 AVE : 2.54kV 4 3 2 AVE : 0.97kV time 1 1ms 300s 1 0.001 0 0.01 0.1 1 10 100 1000 TIME : t(s) Rth-t CHARACTERISTICS www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP 3/3 2013.02 - Rev.D Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. R1102A